Kinesis Savant Elite2 Bedienungsanleitung

QUICK START GUIDE

Kinesis®Savant Elite2™Control Module with

SmartSet Cong App, Models FPMJ2 & FPMJ4

DEFAULT CONFIGURATION

Your Savant Elite2 Control Module comes with either two or four factory-programmed actions:

To use your Savant Elite2 Control Module with the factory-programmed actions:

1. Connect your Kinesis foot pedal(s) or hand trigger(s) to the jack(s) of your choice.

2. Plug the Control Module’s USB cable into your computer.

3. The red LED on the Module will illuminate and a device installation notice will appear.

4. When the green LED illuminates, the device is ready to use with the pre-programmed actions.

5. To switch actions, simply move the pedal/hand trigger to a different jack.

22030 20th Avenue SE, Suite 102, Bothell, Washington 98021 USA

[email protected], 800-454-6374, www.kinesis.com

trademarks of Kinesis Corporation. WINDOWS, MAC, and ANDROID are registered trademarks of Microsoft Corporation, Apple, Inc., and Google, Inc., respectively.

There is no software or special drivers to install — all you need is a USB port. The Savant Elite2

works with Windows, Mac, Android, and Linux. SmartSet Cong App versions are onboard for

graphical programming in Windows & OSX. Visit the SE2 Resources page for full User’s Manual

including how to program in Android and Linux: www.kinesis.com/savant-elite2-resources/.

LANGUAGE NOTE: You must use U.S. English keyboard driver when re-programming your device,

then switch back to your normal language.

Jack acons:

Jack 1: Le mouse buon

Jack 2: Right mouse buon

Jack acons:

Jack 1: Le mouse buon

Jack 2: Right mouse buon

Jack 3: backspace key acon

Jack 4: sample macro “Thank you,”

SmartSet Configuration Application for SE2

NOTE: The SmartSet application for SE2 covers a variety of foot pedal devices and congurations. Control Module

models must be programmed for the available jacks; ignore the pictured pedals when conguring.

TIPS AND TROUBLESHOOTING

The KINESIS FP v-drive is only accessible when the device is placed into Program Mode. The appearance

and location of the v-drive will vary by computer and operating system. If you have trouble locating the v-

drive on your computer please refer to the User’s Manual for suggestions (link below).

For additional support:

• Click the “Help” button inside the SmartSet app for additional instructions

• Visit the SE2 support page www.kinesis.com/savant-elite2-resources/ to download the SmartSet app

or the User’s Manual, and to access Video Tutorials

• Email tech@kinesis.com

• Call 800-454-6374 (US only) or 425-402-8100 (8:30-11:30am & 12:30-4:30pm Pacic Time)

CUSTOM CONFIGURATION OVERVIEW

Your Savant Elite2 (“SE2”) device features Kinesis SmartSet™ driverless conguration technology so it

can be easily reprogrammed to trigger a variety of custom keyboard and/or mouse actions for each of its

available jacks. To program a custom action, simply use the on-board SmartSet application.

The SmartSet app is preloaded onto each Savant Elite2 device (both Windows and Mac versions). The app

resides on a virtual drive (v-drive™) named “KINESIS FP” which is only accessible from your computer

when the device is placed into Program Mode. No special installation is required other than the auto-install

performed by your computer when you rst activate Program Mode. This guide includes step-by-step

instructions to get started. The app also includes on-screen programming prompts and a help le.

Jack 1

CUSTOM CONFIGURATION (WINDOWS)

1. With the SE2 device connected to a PC, activate Program

Mode by SLIDING THE SWITCH on the underside of the

device. For waterproof models, DEPRESS A PEDAL BRIEFLY

WHILE PLUGGING IN THE USB. The red LED will illuminate

briey.

2. Once the LED changes to ashing green, OPEN the

“KINESIS FP” drive. If you do not see an AutoPlay popup,

look in “My Computer” for “KINESIS FP”.

3. Once inside the KINESIS FP drive, double-click the “SE2

SmartSet App (Win)” application to run it.

4. To program a new custom action, click CONFIGURE for the

desired jack.

5. Choose the type of action to program by clicking either

“Single Action”, “Multiple Actions (Macro)” or the “Special

Actions” drop-down menu.

6. INPUT desired action(s) into the yellow programming box

and click DONE.

7. The newly programmed action will now appear in the

corresponding gray box below. REPEAT steps 4—6 as

necessary to congure additional jacks.

8. If you are satised with your new custom action(s) click

SAVE, and then click EXIT PROGRAM.

9. Put the device back into Play Mode by SLIDING THE

SWITCH. For waterproof models, RE-PLUG THE USB.

10. Your Savant Elite2 device is now ready to use with your

custom programmed actions!

1. With the SE2 device connected to a Mac, activate Program

Mode by SLIDING THE SWITCH on the underside of the

device. For waterproof models, DEPRESS A PEDAL BRIEFLY

WHILE PLUGGING IN THE USB. The red LED will illuminate

briey.

2. If the Keyboard Setup Assistant pops up, CLOSE that

window or SKIP the setup.

3. Once the LED changes to ashing green, OPEN the

“KINESIS FP” drive. If you do not see the icon on the desk-

top, look in Finder > Devices for “KINESIS FP”.

4. Once inside the Kinesis FP drive, double-click the “SE2

SmartSet App (Mac)” application to run it.

5. To program a new custom action, click CONFIGURE for the

desired jack.

6. Choose the type of action to program by clicking either

“Single Action”, “Multiple Actions (Macro)” or the “Special

Actions” drop-down menu.

7. INPUT desired action(s) into the yellow programming box

and click DONE.

8. The newly programmed action will now appear in the

corresponding gray box below. REPEAT steps 5—7 as

necessary to congure additional jacks.

9. If you are satised with your new custom action(s) click

SAVE, and then click EXIT PROGRAM.

10. Put the device back into Play Mode by SLIDING THE

SWITCH. For waterproof models, RE-PLUG THE USB.

11. Your Savant Elite2 device is now ready to use with your

custom programmed actions!

Version November 18, 2016

Jack 1

CUSTOM CONFIGURATION (MAC)

Special note for Mac OS X Sierra users- Download Version 1.1.1 of the SE2 SmartSet App at:

https://www.kinesis-ergo.com/savant-elite2-resources/

Andere Handbücher für Savant Elite2

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Kinesis Controller Handbücher

Kinesis

Kinesis savant elite 2 Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Rockwell Automation

Rockwell Automation 1769-L31 Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Samson

Samson Type 5824 Service-Handbuch

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Fishman

Fishman TriplePlay Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung