Kinetic Solar
65 Martin Ross Ave. Unit 1
www.Kineticsolar.com
1-416-665-3755
Commercial | Residential | Industrial | Institutional
Fixed Angle Ground Mount Installation Guide 3 Revised Aug-2020
©2020 All Rights Reserved
Disclaimer
Kinetic Solar Racking and Mounting Inc. (Kinetic Solar) does not install any components of its Racking and
Mounting systems. Kinetic Solar Racking and Mounting does not have any duty or responsibility for safe and
proper installation and/or maintenance of its Racking and Mounting systems; including job site safety standards
and procedures.
All installation work must comply with the applicable regional and local regulations or other national or
international electrical standards and are the sole responsibility of the installer, contractor and/or developer.
Kinetic Solar Racking and Mounting shall not be held responsible for damages of any kind, including but not
limited to: bodily harm, damage to property orinjury. Kinetic Solar Inc.shall not beheld responsible for the proper
compliance or non-compliance with the instructions detailed in this manual including handling solar modules,
solar racking or system installation.
Before attempting to install, operate or service a Kinetic Solar system, all instructions should be read and
understood. Failure to follow these instructions/guidelines may result in death, injury or property damage.
Module manufacturer’s guidelines should be followed at all times. Modules mounting guidelines should be
followed at all times. Ensure recommended rail spacing is consistent with the provided structure. It is the sole
responsibility of the customer to ensure that a compatible module is used.
Solar module width and/or length will determine the exact rail spacing. (Please refer to the module manufacturer’s
specifications)
Please retain this manual for future reference. Kinetic Solar reserves the right to make additions, deletions and
modifications to the content of this document without prior notice.
This manual is only valid for the following Kinetic Solar Racking Systems: Static Ground Mount Models Starting
with SKU KLGM or KRGM
The instructions contained in this manual are exclusive to the products referenced. Use of any other products in
conjunction with the listed products is done at one’s own risk.
