POWER UP THE SPEAKER LIGHT
To ensure easy operation when the Bluetooth Speaker Light is installed in place of an
awning light, use your RV awning light power switch to turn the Speaker Light on or
off. When the Speaker Light is installed in other locations using the optional 110VAC
to 12VDC power adaptor* (sold separately), please use the speaker’s on/off switch
(located on right hand corner of speaker) to turn the LED light on or off.
BLUETOOTH CONNECTION
The RV Media App Controlled Bluetooth Speaker Light connects to devices such as
Smart Phones and Tablets using Bluetooth A2DP Audio Streaming technology.
1. When powered on, the speaker will attempt to connect to a device that has
been paired to it previously. The red LED at the bottom will begin to ash while
the blue LED is illuminated constantly. Depending on how many devices have
been paired previously, the speaker will remain in this mode for around 8-30
seconds. During this time, the speaker will not be visible to devices that have
not connected to it before.
2. After this period, if a device connected previously is not present, or you are
connecting for the rst time, the red and blue LEDs will ash alternately and “RV
Media RGB” will become visible on your Bluetooth Device list. At this time you
can select “RV Media RGB” to connect to the Bluetooth Speaker.
(To connect to the speaker, open the Bluetooth menu on your device and search
for new devices. Select “RV Media RGB” to initiate connection.)
You do not need to enter a PIN code to connect a device to this speaker.
3. When connected, both red and blue LEDs will illuminate constantly to conrm
that a device is connected to the speaker.
4. Only one device can be connected at a time but a maximum of 5 devices, once
paired, can be stored in memory. This means that a device previously paired will
automatically pair once the speaker is turned on providing the device is within
range. If, for example, a 6th device is paired with the speaker, the oldest device
will be erased and will need to be manually reconnected if used again.
5. Once connected to your device, you can then use your device’s audio controls to
start music playback and control the speaker’s volume level.
6. Audio may also be streamed from many Smart Phone apps such as Internet
Radio Stations, Youtube, video players, etc. This feature is dependent on app
and device capabilities, software and operating system version.
APP FUNCTIONS
Once you have paired the speaker to your device, you can now open the app (please
see the QUICK START GUIDE on front for details on installing the RV Media app).
OPERATION
TROUBLESHOOTING
CLEANING
Most connection problems can be xed by manually disconnecting and reconnecting your
Bluetooth device to the RV Media Bluetooth Speaker Light.
CONNECTION SECURITY
While this device does not need a PIN code to allow devices to connect to it, your
connection is secure and cannot be disturbed by other nearby Bluetooth devices.
Once you have turned on the Bluetooth Speaker Light and connected your Bluetooth
device, the speaker ceases being in “discovery” mode and will not be visible to other
Bluetooth devices, ensuring your Bluetooth connection with the speaker is uninterrupted.
If while using the speaker, you want to connect a different device to it, it is suggested you
use the following procedure:
a) Turn off the speaker.
b) Turn off Bluetooth on the device that had been connected to the speaker.
c) Turn on the speaker and connect the new device to it.
NOTE: The reason you need to turn off Bluetooth on the original device is that the speaker
may connect to it rst (when you turn it back on) rather than the new device. Once the
new device is connected, you can turn Bluetooth on again on the original device.
This system ensures you have a secure connection between your device(s) and the
speaker that cannot be interrupted by nearby Bluetooth devices.
While the RV Media Bluetooth Speaker Light is fully waterproof, it is recommended that
when cleaning your RV with a pressure washer or high pressure hose that it be covered
with a plastic bag and taped to the edge of the speaker.
RV Media RGB Speaker Light Package Contents
1 x Bluetooth RGB Speaker Light 2 x Mounting Brackets
6 x Mounting Screws 1 x 12V Power Lead
4 x Screw Covers 1 x Setup Guide/Warranty
Foam sealing tape
The Bluetooth word mark and logos are owned by the Bluetooth SIG, inc and any use of such
marks by RV Media is under license. Other trademarks and trade names are those of their
respective owners.
As RV Media will continually strive to improve our products, specications and design are
subject to change without notice. Please dispose of thoughtfully recognizing local regulations.
APP FUNCTIONS - MAIN CONTROL SCREEN (FIG. 1)
Light Control
To turn the integrated light on or off, tap on the light bulb symbol (Fig. 1a).
To dim or brighten the light, touch and move the Dimmer icon (Fig. 1b). Move it counter
clockwise to dim the light or clockwise to make the light brighter. To change the light’s
color, select your desired color within the color wheel (Fig. 1e).
Equalizer
The RV Media app also features an integrated audio Equalizer. To use this function, tap
on the Equalizer icon (Fig. 1c) and then select your desired sound mode for a selection of:
Pop, Rock, Classical, Disco, Jazz or Theater (Fig. 2).
To return to the Main Control Screen, touch the return arrow (Fig. 2a).
Additional Functions (Color Scan, Insect Light, Sleep Timer)
From the Main Control Screen, touch the Additional Function Icon (Fig. 1d) to access the
Additional Function Screen (Fig. 3) for the following functions:
Color Scan
This mode constantly changes the light color through the color spectrum. Slide the
speed control (Fig. 4a) to vary the scan speed to suit your mood! Great for parties,
demonstrations or relaxing.
Insect Light
Turn on the Insect Light mode to help keep insects away from your RV. The amber
colored light has been carefully selected specically for this function.
Sleep Timer
The sleep timer allows you to completely power off the Speaker Light after a
predetermined period of time that you select. This is a great security function as well as
being useful if someone is, for example, returning to the RV at a later time. When you
tap the sleep timer function (Fig. 5a), you can select a sleep time varying from 0 minutes
(which turns off the speaker immediately) to 60 minutes. Scroll to your desired time then
tap “Conrm” to start the timer.
NOTE: As this function completely powers off the speaker, you will not be able to turn it
back on via the app. To power the speaker up again, you will need to turn it off and on at
its main power switch (for example the awning light switch on the vehicle).
Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 5 MADE IN CHINA FCC ID: 2AGDW0006V2
KING is a registered trademark of Electronic Controlled Systems, Inc.
©2015 KING 22316 Rev A
LIMITED WARRANTY
The RV Media Speaker Light is covered by a one year parts limited warranty from the date of original
purchase. The customer is not responsible for the cost of replacement parts if the original part is determined
to be defective under the terms of the warranty. The customer is responsible for the cost of replacement
parts after one year.
Only KING may perform warranty evaluations and repairs. Depending upon the problem, KING may
authorize a dealer to perform the necessary repairs. Any labor expense outside of that performed at the
factory is not covered under this warranty.
Should any trouble develop during the warranty period, contact KING at (952) 922-6889. You must contact
KING before the warranty period expires. The customer must supply proof of purchase (such as a dated
sales receipt) when requesting warranty service. If the customer cannot supply proof of purchase, warranty
period shall start 30 days after date of manufacture.
If it is determined that the unit needs to be returned to KING, customer must return COMPLETE product,
freight prepaid, to: KING, 11200 Hampshire Avenue South, Bloomington, MN 55438.
If inspection shows the trouble is caused by defective workmanship or material, KING will repair
(or at its option, replace) without charge.
When returning product, KING will supply an RMA number (Return Merchandise Authorization).
This number must be clearly written on the box. Failure to clearly write RMA number on box will result in
delays in processing claim. Along with product, the customer should include in the box: name, address,
daytime phone number, proof of purchase and description of the problem.
This warranty does not cover installation and external wiring, or remanufactured units. This warranty is not
transferable from the original owner. This warranty also does not apply where:
• The product has been abused, misused, improperly installed or improperly maintained.
• Repairs have been made or attempted by others that are not certied by KING to do such repairs.
• Repairs are required because of normal wear and tear.
• Alterations have been made to the product or the unit has been opened without authorization.
• Damage has been caused by power washing.
• Circumstances beyond the control of KING cause the product to no longer operate correctly.
In no event shall KING be liable for any indirect, incidental, or consequential damages from the sale or use
of the product. This disclaimer applies both during and after the term of the warranty.
KING disclaims liability for any implied warranties, including implied warranties of “merchantability” and
“tness for a specic purpose,” after the one year term of this warranty.
This warranty gives you specic legal rights, and you may also have other rights, which vary from state to
state. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the
above limitation or exclusion may not apply to you. Some states do not allow limitations on how long an
implied warranty lasts, so the above limitation may not apply to you.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
Please take attention that changes or modication not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This equipment should be installed and operated with a minimum distance of 8 inches between the radiator and
your body.
