KINGJOY C86M Bedienungsanleitung
KINGJOY C86M
User Manual • Uživatelský manuál •
Užívateľský manuál • Használati utasítás •
Benutzerhandbuch
2
English
3 –15
Čeština
16 –28
Slovenčina
29 –41
Magyar
42 –54
Deutsch
55 –67
3
The product user guide contains product features, how to use, and the operating
procedure. Read the user manual carefully to get the best experience and avoid
unnecessary damage. Keep this manual for future reference. If you have any questions
or comments about the device, please contact the customer line.
✉www.alza.co.uk/kontakt
✆+44 (0)203 514 4411
Importer Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Praha 7, www.alza.cz
4
Cautions:
Do not exceed the tripod’s maximum load capacity.
Ensure the center column is locked.
Do not operate this tripod when the temperature is below -20⁰C or
above 70⁰C. It is not commended to operate in saltwater.
Do not put this tripod in sunlight or leant it against the glass of car for
a long time.
Do not leave this tripod unattended in public place; please be careful
when use it in dangerous place.
Remove the camera from the ballhead during setup or transport.
It is not necessary to equip lubricant. Please use standard lubricant or
grease when necessary.
For your safety, keep it out of power supply.
5
Product Illustration
1
2
3/8“ Camera Screw
3/8“ Screw Hole
Foot tube
Rubber sleeve
Bubble Level
Release Buckle
Lock the handle
Foot tube
Rubber pads
Pull Out
Turn Over
6
3
4
5
7
1. Tripod Introduction. (Illustration 1)
2. Tripod Set-up
Pull out the release buckle and turn over the leg outward for different tripod angle
adjustment. (Illustration 2,3)
3. Leg Section Extension and Fold
Loosen the twist lock to extend/fold the flag, tighten the twist lock to lock the leg.
(Illustration 4)
4. Take Out the Head Mount Plate
Loosen the plate locking knob to take out the head mount plate.
5. Accessories Connection
3/8” 1/4” screw hole can be connected with the accessories which with the same
interface, such as magic arm, flashing light and external stand, etc.
6. Tripod loading plate disassembly and video head assembly.
Anticlockwise rotate the handle bar to release and take out the loading plate, put the
video head in the bowl, clockwise rotate the handle bar, vide head can be locked.
(Illustration 5)
8
KINGJOY-VT3530M
9
1
2
Button Knob
1/4“ camera screw
3/8“ camera screw
Left side cover knob
Right Side cover knob
Knob for handle
Dynamic balance knob
Handle
QB-1 big knob
Quick release plate
Knob for quick
release plate
Button knob
10
3
4
Press this knob
Take out quick release plate as the direction
shown
UNC3/8“ thread hole
Inhaltsverzeichnis
Sprachen:
Andere KINGJOY Kamerazubehör Handbücher
KINGJOY
KINGJOY VT-2100 Bedienungsanleitung
KINGJOY
KINGJOY G22C Bedienungsanleitung
KINGJOY
KINGJOY VT-831 Bedienungsanleitung
KINGJOY
KINGJOY VT-860 Bedienungsanleitung
KINGJOY
KINGJOY FL2009 Bedienungsanleitung
KINGJOY
KINGJOY KINGJOY-VT-1500 Bedienungsanleitung
KINGJOY
KINGJOY FL019S Bedienungsanleitung
KINGJOY
KINGJOY VZ-880 Bedienungsanleitung
KINGJOY
KINGJOY VT-840 Bedienungsanleitung
