Kingtop S600 Bedienungsanleitung

User guide

POS terminal S600

Manual Version: V1.0

subject to change without notice and should not be construed as a commitment by Kingtop Corp.

Patents and Licenses

For a complete list of all Kingtop Corp. patents, visit https://www.kingtoptec.com/contact

Software License

Proprietary Rights Provisions:

The software drivers provided with this product are copyrighted by Kingtop Corp. and/or

Kingtop Corp.’ suppliers. Although copyrighted, the software drivers are unpublished and

embody valuable trade secrets proprietary to Kingtop Corp. and/or Kingtop Corp.

suppliers. The disassembly, decompilation, and/or Reverse Engineering of the software

drivers for any purpose is strictly prohibited by international law. The copying of the

software drivers, except for a reasonable number of back-up copies is strictly prohibited

by international law. It is forbidden by international law to provide access to the software

drivers to any person for any purpose other than processing the internal data for the

intended use of the software drivers.

Trademarks and Service Marks

Kingtop Corp. is a trademark of Kingtop Corp., and the other trademarks, logos, and

service marks (collectively the “Trademarks”) used in this user manual are the property of

Kingtop Corp. or their respective owners. Nothing contained in this user manual should

be construed as granting by implication, estoppel, or otherwise, a license or right of use of

Kingtop Corp. or any other Trademark displayed in this user manual without the written

permission of Kingtop Corp. or its respective owners.

• Kingtop Corp., and the Kingtop Corp. logo are all trademarks of Kingtop Corp.

The names of actual companies and products mentioned in this user manual may be the

trademarks of their respective owners.

Contents

1. About Your POS Terminal .............................................................................. - 1 -

Front view ....................................................................................................- 1 -

Back view .................................................................................................... - 2 -

2. Operating Instructions ................................................................................... - 2 -

Turning your POS terminal on/off ................................................................ - 2 -

Magnetic stripe card ....................................................................................- 3 -

Contact IC card ........................................................................................... - 3 -

Contactless IC card .....................................................................................- 4 -

Install the printer paper ............................................................................... - 4 -

Tear paper ................................................................................................... - 5 -

Install the SIM/PSAM card .......................................................................... - 5 -

Insert the battery ......................................................................................... - 6 -

Charge your device ..................................................................................... - 7 -

3. Precautions ................................................................................................... - 7 -

Safety Warning ............................................................................................- 7 -

Important safety instructions ....................................................................... - 8 -

Suggestions ................................................................................................ - 8 -

Declaration .................................................................................................. - 8 -

Disclaimer ................................................................................................... - 9 -

4. Proper Battery Use and Disposal .................................................................. - 9 -

5. Limited Warranty and liability .......................................................................- 10 -

- 1 -

1. About Your POS Terminal

Front view

❶NFC reader —— For Proximity card, membership card

❷Paper silo cover—— Protecting and Cutting Thermal Paper

❸Volume buttons —— Adjust the volume level

❹Front camera—— Supports photographing and 1D/2D code quick scanning.

❺Power on/off button——

Short press: wake up the screen, lock the screen.

Long press: long press for 2-3 seconds in power off mode to switch on the device.

Long press for 2-3 seconds in normal operation mode to select power off or reboot.

Long press for 11 seconds when system is frozen for automatic reboot.

❻Light sensor—— Automatically adjusts the two degrees of the display

❼MSR card reader——Used for reading the information stored in the magnetic stripe of

bank card.

❽Display screen —— Used to display product information and other functions

❾ICCR Card reader —— Used for inserting the bank chip card.

- 2 -

Back view

❶Label/Sticker —— For custom logos and labels

❷Rear camera—— Supports photographing and 1D/2D code quick scanning.

❸Type-C USB —— Used for charging equipment and debugging by developers.

❹Pogo pin—— Use as a charging function

❺MIC—— Support for recording external voices

❻Battery cover—— It can be disassembled, battery can be replaced

❼Audio port—— External headphones are available

❽Speaker —— Broadcast payment status

2. Operating Instructions

Turning your POS terminal on/off

Power on: Press the "heart" button on the left side of the POS machine for 2-3 seconds,

and the POS machine will start booting

Power off: Press and hold the "heart" key in the power on state, the screen displays

"shutdown, restart airplane mode, silent mode", select "shutdown", and "Your smart

terminal will shut down, 【Cancel】and【OK】Picture，At this point, press the【OK】

key to complete the shutdown.

- 3 -

Magnetic stripe card

When you swipe the card, please slide the magnetic stripe of the magnetic card towards the

inside of the device and across the magnetic track (as shown in the figure), the process

should be smooth and at an even speed.

Magnetic stripe facing the inside of the device

[Note]

If the track of the magnetic stripe card is damaged or the card is swiped incorrectly, the

transaction may fail.

Contact IC card

The IC card slot is located on the right side of the machine. When inserting the card, hold

the IC card without the end of the chip, the chip side is facing up, insert the IC card into the

card slot and push it to the end. The IC should be kept stuck in the card slot throughout the

transaction. As shown in the picture :

[Note]

If the chip contacts of the IC card are damaged or oxidized, the transaction may fail.

Chip card facing inside the device

- 4 -

Contactless IC card

When you swipe the card, please put the IC card close to the center of the screen and stay

for about 1s. When you hear a "beep", it indicates that the card is swiped successfully, and

you can remove the card. As shown in the picture:

IC card near the center of the NFC reader

Install the printer paper

❶Step1. Buckle the edge of the paper compartment cover, and open the paper

compartment cover in the direction shown.

❷Step2. Peel off the printing paper, pull one end of the printing paper, align the paper

compartment in the direction shown in the figure, and leave a small section of paper above

the paper cutter

❸Step3. Close the paper compartment cover in the direction shown in the illustration.

❶Open the paper cover ❷Put the thermal paper ❸Close the paper cover

- 5 -

[Note]

When loading thermal paper, please pay attention to the direction of the paper, and follow

the instructions in the illustration to turn the paper roll open side down, otherwise

characters cannot be printed.

Tear paper

Pinch the protruding part of the print paper with your hand and tear the paper in the

direction shown in the illustration(downwards). Try to keep the force even and fast during

the paper cutting process.

Tear Paper Down

Install the SIM/PSAM card

Step1: Power off and open the battery cover

Step2:After removing the battery, put the SIM/PSAM card into the card slot (the chip side

faces the inside of the machine) . As shown in the picture:

- 6 -

NO.

Description

NO.

Description

❶

SIM1 Card Slot

❸

TF Card Slot

❷

SIM2/SAM2 Card Slot

❹

SAM1 Card Slot

[Note]

1. To install or remove the SIM/PSAM card, please ensure that the machine is turned off,

otherwise the card may be damaged.

2. The SIM/PSAM card cannot be pasted with glue, stickers and other media that affect the

thickness of the card, so as not to be able to smoothly load or remove the card.

Insert the battery

Step1: Open the battery cover

Step2: Insert the battery into the battery compartment (the battery gripper faces the rear of

the machine).

- 7 -

Battery gripper faces the rear of the machine

Charge your device

Open the battery cover, put the rechargeable battery into the battery compartment, and

close the battery cover. Connect the USB cable to the adapter or mobile power bank or PC.

Type-C end is inserted into the port on the left side of the machine, and the adapter is

plugged into the power outlet, after the power is turned on, the machine screen shows the

charging progress, and the battery is fully charged 。

3. Precautions

Safety Warning

Please insert the AC plug into the AC outlet corresponding to the marked input on the

accessory power adapter

This is a Class A product. In living environments, this product may cause radio

interference.

In this case, the user may be required to take practical measures against interference.

-Use only the battery supplied with the unit.

-Do not replace the battery when explosive gases are present.

-Do not charge in hazardous locations.

Inhaltsverzeichnis

Andere Kingtop Touch-Terminal Handbücher

Kingtop

Kingtop V510 Bedienungsanleitung

Beliebte Touch-Terminal Handbücher anderer Marken

Wincor Nixdorf

Wincor Nixdorf iPOS plus Advanced Bedienungsanleitung

Ingenico

Ingenico AXIUM EX4000 Bedienungsanleitung

Heisei Electronics

Heisei Electronics Q-POS 815 Bedienungsanleitung

Amano

Amano MTX-15 Bedienungsanleitung

FLOWBIRD

FLOWBIRD CWT Compact Touch Bedienungsanleitung

Demco

Demco SP7 Bedienungsanleitung

Lathem

Lathem PC600 Series Bedienungsanleitung

Partner

Partner MF-2352 Bedienungsanleitung

NCR

NCR RealPOS 7460-2 Handbuch

Simrad

Simrad MS50 Montageanleitung

Unitech

Unitech MR350 MKII Kurzanleitung

Jungheinrich

Jungheinrich WMT 210 Bedienungsanleitung

Motorola

Motorola MTP850 Bedienungsanleitung

YASKAWA

YASKAWA 62H-MDC0 Bedienungsanleitung

MVG industries

MVG industries NeptuLink Bedienungsanleitung

Price Industries Limited

Price Industries Limited FDC Gebrauchsanweisung

Honeywell

Honeywell TemaKey Bedienungsanleitung

EBN

EBN BPC65-B-A16G Bedienungsanleitung