Kino Flo Kamio 6 Bedienungsanleitung
Operation Manual
Kamio 6
Flex Arm Mount
The Flex Arm Mount ( MTP-KAM6 ) is used to mount a Kamio
Ring Light ( Model: Kam6 or Kam6E ) onto a baby stand.
( A ) The central
knob locks the
flex arms in
place.
( B ) The locking
nut must be
tightened to
secure the baby
receiver.
Attach the Kamio to the
mating ring on the Flex Arm. Lock the Kamio in place by
tightening the long locking
screw.
2
MTP-KAM6P
The optional Photo Adapter
allows the Flex Arm to be
mounted to a camera or onto
a tripod.
Screw the Photo Adapter
plate to the camera.
Remove the baby receiver
from the Flex Arm.
Screw the Flex Arm to the
Adapter . Tighten locking
screw to secure the arm to
the adapter.
3
Screw the Adapter with
camera to the tripod.
4
Environmental: Disposal of Old Electrical & Electronic Equipment.
Rev 10-05-2005
Part No. 3100036
This symbol on the product or on its packaging indicates that this product
shall not be treated as household waste. This product is made of recyclable
materials and should be disposed of in accordance with local and state
regulations.
Top Arm: 3.97” ( 101mm )
Bottom Arm: 4.33” ( 110 mm )
Total Length: 8.3” ( 211mm )
Weight w/ Baby Receptacle: 0.768 lb ( 348 g )
Weight w/ Photo Adapter: 0.844 lb ( 382 g )
MTP-KAM6
The Kamio can be positioned
around or above the lens.
Kino Flo, Inc. 2840 N. Hollywood Way, Burbank, CA 91505, USA
Tel: 818 767-6528 website: www.kinoflo.com
Andere Handbücher für Kamio 6
1
Dieses Handbuch passt für folgende Modelle
1
Andere Kino Flo Kamerazubehör Handbücher
