KitchenAid 4452828 Bedienungsanleitung

Part No. 4452828

Installation Instructions

IMPORTANT:

Installer: Leave Installation

Instructions with the homeowner.

Homeowner: Keep Installation

Instructions for future reference.

Save Installation Instructions for local

electrical inspector’s use.

Write down the model and serial numbers

before installing warming oven.

Both numbers are on the model/serial

rating plate, located on the upper left front

corner of the oven cavity.

Model #___________________________

Serial # ___________________________

Questions regarding features, operation,

performance, parts or service? Call

1-800-422-1230 or visit our web site at

www.kitchenaid.com.

IMPORTANT:

Read and save these

instructions.

27" and 30" Electric Warming Oven

Call when you:

嘼Have questions about warming oven

installation or operation.

嘼Need to obtain the name and number

of an authorized service

company.

When you call, you will need:

嘼The warming oven model number.

嘼The warming oven serial number.

Both numbers are listed on the

model/serial rating plate, located on the

upper left front corner of the oven cavity.

For the way it’s made

Before you start...

Tools needed for installation:

This is the safety alert

symbol.This symbol alerts

you to hazards that can kill

or hurt you and others. All safety

messages will be preceded by the

safety alert symbol and the word

“DANGER” or “WARNING”.These

words mean:

You can be killed or seriously

injured if you don’t follow

instructions.

DANGER

Your safety and the safety of

others is very important.

We have provided many important

safety messages in this manual and

on your appliance. Always read and

obey all safety messages.

All safety messages will identify the

hazard, tell you how to reduce the

chance of injury, and tell you what

can happen if the instructions are

not followed.

You will be killed or seriously

injured if you don’t follow

instructions.

Parts supplied:

WARNING

Important: Observe all governing

codes and ordinances.

Proper installation is your responsibility.

Have a qualified technician install this

oven.

Oven location should be away from

strong draft areas, such as windows,

doors and strong heating vents.

Cabinet opening dimensions that are

shown must be used. Given dimensions

provide minimum clearance.

Recessed installation area must provide

complete enclosure around the recessed

portion of the oven.

Electrical ground is required. See

“Electrical requirements.”

Electrical supply outlet should be

located in the rear wall on the lower right

side of the cutout or in an adjacent

cabinet.The outlet must be recessed. If

the electrical outlet is located in an

adjacent cabinet, provide a 1-3/8" dia.

minimum power supply cord plug

clearance hole in the back of the cutout or

support surface.

Oven support surface MUST be solid,

level and flush with bottom of cabinet

cutout.

There is no provision to level the oven

after it has been installed. If the

installation is not level, the door may

slide open or not seal tightly allowing

heat to escape resulting in poor oven

performance.

Phillips

screwdriver

Copies of the standards listed may be obtained

from:

* National Fire Protection Association

One Batterymarch Park

Quincy, Massachusetts 02269

It is the customer’s responsibility:

To contact a qualified electrical installer.

To assure that the electrical installation is

adequate and in conformance with

National Electrical Code, ANSI/NFPA 70

— latest edition*, and all local codes and

ordinances.

2 screws

Product Dimensions

Cutout Dimensions

22-3/4"

max.

recessed

depth

10-1/4"

overall

height

Overall Recessed

Oven Size Width Width

27" 26-3/4" 25-1/4"

30" 29-3/4" 28-1/4"

Warming

oven front

22-3/4"

recessed

oven depth

24" min.

cutout depth

Support surface must

be solid, level, and

flush with bottom of

cabinet cutout.

3 ft. long power supply

cord located on the back,

upper right hand side of

oven.

Single oven

cutout

Warming

oven cutouts

120-volt

grounded outlet

(or located in

adjacent cabinet)

Toe kick

cutout width

min. cabinet width

Oven Size

27" 25-1/2" 27"

30" 28-1/2" 30"

Support

surface

2-1/2" min.

9-1/8"

Recommended 4-1/4"

Minimum 1" Warming oven can be installed as a

single or double installation or

installed under a single oven.Two

warming ovens under a single oven

are shown.

9" recessed height

Electrical

requirements

Electrical Shock Hazard

Plug into a grounded 3-prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can

result in death, fire, or electrical shock.

Important: Observe all governing

codes and ordinances.

It is the customer's responsibility:

To contact a qualified electrical

installer.

To assure that the electrical

installation is adequate and in

conformance with National Electrical

Code, ANSI/NFPA 70 — latest edition*,

and all local codes and ordinances.

You must have:

嘼

120-volt, 60Hz, AC-only, 15- or 20-

amp., fused electrical supply.

嘼

outlet located in the cabinet as close

as possible to the warming oven.

We recommend:

嘼

a time-delay fuse or circuit breaker.

嘼

a separate circuit serving this

appliance only.

If codes permit and a separate ground

wire is used, it is recommended that a

qualified electrician determine that the

ground path is adequate.

3-prong

ground plug

power supply

cord

ground prong

3-prong

ground-type

outlet

For your personal safety, this appliance

must be grounded.This appliance is

equipped with a power supply cord

having 3-prong ground plug.To minimize

possible shock hazard, the cord must be

plugged into a mating 3-prong ground-

type outlet, grounded in accordance with

local codes and ordinances. See

Figure 1. If a mating outlet is not

available, it is the personal responsibility

and obligation of the customer to have a

properly grounded 3-prong outlet installed

by a qualified electrician.

Warning — Improper connection of the

equipment-grounding conductor can

result in a risk of electric shock. Check

with a qualified electrician or serviceman

if you are in doubt as to whether the

appliance is properly grounded. Do not

modify the plug provided with the

appliance - if it will not fit the outlet, have

a proper outlet installed by a qualified

electrician.

Figure 1

WARNING

Installation

1.Turn power supply off. Move oven

close to final position.

• Remove and discard shipping materials,

tape and protective film from the oven.

• Remove and set aside racks and other

parts from inside oven.

Important: Use both hands to remove oven

drawer.

Do Not use handle or drawer slides for

lifting.

Excessive Weight Hazard

Use two or more people to move and

install oven.

Failure to follow this instruction can

result in back or other injury.

WARNING

2.Remove the drawer:

• Pull drawer to its full open position.

• Press tab down on right and lift tab

upward on left, then slide drawer out

about 1 inch.

• Carefully remove the drawer from the

slides holding on to the sides, not the

drawer front.

• Set drawer aside on protected surface.

3.Carefully support the oven in front

of the cutout. Make sure the power to the

outlet is turned off and that the warming

oven power switch is set to the "OFF"

position.

• Plug the power supply cord into the

grounded outlet.

• Slide the oven into the cutout.

• Carefully push against the seal area of

the oven front frame and slide the oven

completely into the cabinet until the

front frame is positioned flush against

the cabinet face.

4.Use two (2) screws provided to

secure the warming oven frame to the

cabinet.

2 screws

5.Replace the drawer:

• Align the drawer guides with the

receiving slides.

• Push drawer in completely. Gently open

and close drawer to ensure it is seated

properly on the slides.

receiving slides

6.Refer to the "Use and Care

Guide," turn the oven on and check the

oven's operation.

If you need

assistance:

The KitchenAid Consumer Assistance

Center will answer any questions about

operating or maintaining your warming

oven not covered in the Installation

Instructions.The KitchenAid Consumer

Assistance Center is open 24 hours a

day, 7 days a week. Just dial 1-800-422-

1230 — the call is free within the

continental United States, or visit our web

site at www.kitchenaid.com.

When you call, you will need the warming

oven model number and serial number.

Both numbers can be found on the

model/serial rating plate located on the

upper left front corner of the oven cavity.

If you need

service:

In the event that your KitchenAid

appliance should need service, call

the dealer from whom you

purchased the appliance or a

KitchenAid-designated service

company. A KitchenAid-designated

service company is listed in the

Yellow Pages of your telephone

directory under “Appliances —

Household — Major — Service and

Repair.”

You can also obtain the service

company's name and number by

dialing, free within the continental

United States, the KitchenAid

Consumer Assistance Center

telephone number, 1-800-422-1230. A

special operator will tell you the

name of your nearest KitchenAid-

designated service company.

Maintain the quality built into your

KitchenAid appliance — call a

KitchenAid-designated service

company.

If warming oven

does not operate:

嘼

Check that the circuit breaker is not

tripped or the house fuse blown.

嘼

Check that the power supply cord is

plugged into the outlet.

Inhaltsverzeichnis

Andere KitchenAid Speisenwärmer Handbücher

KitchenAid

KitchenAid 5KTBW21 Bedienungsanleitung

Beliebte Speisenwärmer Handbücher anderer Marken

ARREDO

ARREDO Illusion 1000 Bedienungsanleitung

Vollrath

Vollrath Mirage 74701DW Bedienungsanleitung

Moffat

Moffat BKRW3 Service-Handbuch

Hupfer

Hupfer SPTW-2/EBF Bedienungsanleitung

Kontour

Kontour K1043E Bedienungsanleitung

Hatco

Hatco Glo-Ray GRMW-3 Anwendungshandbuch

HATO

HATO Macho Nacho FST-1-MN Bedienungsanleitung

Wittco

Wittco 500-CW Bedienungsanleitung

Wells

Wells SS-276ULT Bedienungsanleitung

Kerbl

Kerbl FastHeat Bedienungsanleitung

Johnson

Johnson Kaldino Bedienungsanleitung

Wells

Wells BMW206ULRTD/AF Bedienungsanleitung

KRATOS

KRATOS 29М-008 Bedienungsanleitung

Wells

Wells M227 Series Bedienungsanleitung

Henny Penny

Henny Penny HCS-2 Bedienungsanleitung

Amba

Amba RADIANT RSWH-P Bedienungsanleitung

Homecraft

Homecraft BS15BS Bedienungsanleitung

Hatco

Hatco PW Series Bedienungsanleitung