KitchenAid KEK1032 Bedienungsanleitung
KEK1032
W11030459A_ENv17.indd 1 4/17/18 11:50 AM
2 | PARTS AND FEATURES
PARTS AND FEATURES
PARTS AND ACCESSORIES
Built-in thermometer
Control panel with
Hold Temp feature and
F°/C° change function
Goose-neck spout
designed for
expert-quality
precision pour control
Kettle base
with digital display
1-L capacity
Precision
Kettle
Power cord with
attached cord wrap
Lid
W11030459A_ENv17.indd 2 4/17/18 11:50 AM
ENGLISH
PARTS AND FEATURES | 3
PARTS AND FEATURES
3-position precision flow
control (inside body)
Flow control lever
Since 1919
Built-in thermometer dial
Control panel with
Hold Temp feature and
F°/C° change function
Add Water icon
Hold Temp icon
Hold Temp button
- button
+ button
Heating icon
Power button
W11030459A_ENv17.indd 3 4/17/18 11:50 AM
4 | PRECISION KETTLE SAFETY
PRECISION KETTLE SAFETY
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always
be followed, including the following:
1. Read all instructions.
2. Do not touch hot surfaces. Use handles.
3. To protect against re, electrical shock, and injury to persons, do not immerse
base, cord, plug, or the Precision Kettle in water or other liquids.
4. Use close supervision when using the Precision Kettle near or by children.
5. Unplug the Precision Kettle from outlet when not in use and before cleaning.
Allow to cool before putting on or taking off parts, and before cleaning the
appliance.
6. Do not operate the Precision Kettle with a damaged cord or plug or after the
appliance malfunctions or has been damaged in any manner. Return appliance
to the nearest Authorized Service Center for examination, repair, or adjustment.
7. Use of replacement parts or accessory attachments not recommended by
manufacturer may result in re, shock, or injury to persons.
8. Do not use outdoors.
9. Do not let cord hang over counter or table edges, or allow to come into contact
with heated surfaces.
W11030459A_ENv17.indd 4 4/17/18 11:50 AM
ENGLISH
PRECISION KETTLE SAFETY | 5
PRECISION KETTLE SAFETY
ELECTRICAL REQUIREMENTS
Voltage: 120 VAC
Frequency: 60 Hz
Wattage: 1000 W
NOTE: The Precision Kettle has a
3 prong grounded plug. To reduce the
risk of electrical shock, this plug will fit
in an outlet only one way. If the plug
does not fit in the outlet, contact a
qualified electrician. Do not modify
the plug in any way.
Do not use an extension cord. If the power
supply cord is too short, have a qualified
electrician or service technician install an
outlet near the appliance.
A short power supply cord (or detachable
power supply cord) should be used to
reduce the risk resulting from becoming
entangled in or tripping over a longer
cord.
10. Do not place on or near a hot gas or electric burner, or in a heated oven.
11. The Precision Kettle should only be used to heat water.
12. Do not use the Precision Kettle without lid properly closed.
13. Do not use the Precision Kettle with loose or weakened handle.
14. Do not use the appliance for other than intended use.
15. Do not clean the Precision Kettle with abrasive cleaners, steel wool,
or other abrasive materials.
16. Do not overll the Precision Kettle.
17. Scalding may occur if the lid is removed during the heating cycle.
18. To disconnect, turn the control to “off,” then remove plug from wall outlet.
SAVE THESE INSTRUCTIONS
This product is designed for household use only.
W11030459A_ENv17.indd 5 4/17/18 11:50 AM
6 | USING THE PRECISION KETTLE
FOR DETAILED INFORMATION ON
USING THE PRECISION KETTLE
Visit kitchenaid.com/quickstart for
additional instructions with videos and tips
on how to use your Precision Kettle.
Before first use
Before using your Precision Kettle for the rst time, wash the kettle and all accessories,
including the lid, with warm, soapy water, then rinse with clean water and dry. Fill the
Precision Kettle with water to the MAX ll line (see example below) and run one cycle at
the maximum temperature. To avoid damage, do not fully immerse the Precision Kettle in
water, and do not use abrasive cleaners or scouring pads.
NOTE: The entire Precision Kettle is hand wash only. To avoid damage, do not wash any
part of the Precision Kettle, its accessories, or the base with power cord in a dishwasher.
PREPARING THE PRECISION KETTLE FOR USE
USING THE PRECISION KETTLE
Since 1919
Fill the Precision Kettle with water to the
MAX ll line inside the Kettle.
IMPORTANT: Be sure that the vent holes
at the top of the kettle are clean and free
of obstruction, or the Precision Kettle
may overflow.
1Place the base with power cord on
a flat, sturdy surface and plug it into
a 3 prong grounded outlet.
W11030459A_ENv17.indd 6 4/17/18 11:50 AM
ENGLISH
USING THE PRECISION KETTLE | 7
USING THE PRECISION KETTLE
BREW/STEEP TEMPERATURE SUGGESTIONS
The KitchenAid®Precision Kettle allows you to condently pour with precision. It features
the industry-standard 1-liter capacity carafe. Select your desired brewing temperature
customizable in 1-degree increments ranging from 140-212°F (60-100°C), with the option
to hold for 30 minutes. A brew-range thermometer is displayed on the lid to keep track
of your water temperature while you pour so you know you are within your preferred
brewing range.
NOTE: The Precision Kettle is designed for water only. Do not put any other liquids
or substances in the Precision Kettle.
BEVERAGE Coffee Green
Tea White
Tea Oolong
Tea Black
Tea Herbal
Tea
SUGGESTED
TEMPERATURE
(C°/F°)
92-96°C 80°C 85°C 90°C 95°C 100°C
196-205°F 176°F 185°F 194°F 203°F 212°F
SUGGESTED
BREW/
STEEP TIME
(MINUTES)
3-5 1-3 3-5 3-5 4-5 5-7
The above suggestions are points of reference. KitchenAid
recommends that you experiment with temperature and
brew/steep times to nd the perfect formula for your
preferred cup of coffee or tea.
For easy reference, the suggested temperature range for
brewing coffee is shown in red on the built-in thermometer.
This chart shows the boiling point of water at different altitudes. Please refer to this chart
in order to adjust your temperature setting according to the elevation in your area.
ALTITUDE BOILING POINT REFERENCE GUIDE
90.5°/194.9°
91.6°/196.8°
92.6°/198.7°
93.7°/200.6°
94.7°/202.5°
95.8°/204.4°
96.8°/206.3°
97.9°/208.2°
98.9°/212°
100°/212°
BOILING POINT °C/°F
ELEVATION*
Since 1919
*Elevation shown in feet above sea level.
W11030459A_ENv17.indd 7 4/17/18 11:50 AM
8 | USING THE PRECISION KETTLE
USING THE PRECISION KETTLE
1
Your Precision Kettle has three flow
control settings. The flow control
lever inside the kettle is used to
change the settings.
2Push the lever down for more
restricted flow; pull the lever up
for less restricted flow.
CHANGING THE FLOW CONTROL
NOTE: After heating water, be sure to empty the Precision Kettle and allow it to cool
completely before changing any flow rate settings.
TIP: The flow control lever is meant to come out for cleaning. If you pull up too
far while changing the flow rate settings and the lever comes out, it can easily slide
back into place.
TIP: Prior to first use, fill the Precision Kettle with room-temperature water and pour at
each flow control setting to become familiar with the different flow rates.
CUSTOMIZING THE KETTLE LID TENSION AND FLOW
CONTROL LEVER
1
If you feel the lid is too hard or too
easy to remove, try adjusting the
tension. Use a small tool, such as a
small screwdriver, to adjust the three
tabs on the kettle rim. Push in to
create less tension; pull out to create
more.
2
After adjusting tabs, put the lid back
on the Precision Kettle to test the
setting and see if your adjustment
is satisfactory. Continue to adjust
as needed.
W11030459A_ENv17.indd 8 4/17/18 11:50 AM
ENGLISH
USING THE PRECISION KETTLE | 9
USING THE PRECISION KETTLE
FILLING THE PRECISION KETTLE WITH WATER
1Remove lid from the Precision Kettle
and fill with water. 2Replace the lid and put the Precision
Kettle back on the base.
NOTE: Do not fill past the MAX fill line of
1 liter.
IMPORTANT: There must be a minimum
of 1 cup (.25 L) of water for the Precision
Kettle to operate. If the water level drops
below this point, the Add Water icon will
light, and you will need to add water to
the Kettle before continuing use.
3
If you feel the flow control is too easy
or too hard to move, use your fingers
to adjust the tab on the flow control
lever. Push in to create less tension;
pull out to create more.
4Test the flow control to see if the
tension is correct; continue to adjust
if needed.
W11030459A_ENv17.indd 9 4/17/18 11:50 AM
10 | USING THE PRECISION KETTLE
USING THE PRECISION KETTLE
HEATING WATER
3
Press the (Power) button to save
temperature and to begin heating
the water. The (Heating icon) will
be displayed on the LCD screen to
indicate that the Precision Kettle
is heating.
4
While heating, the temperature
that shows on the display screen
is the actual water temperature,
not the selected temperature.
1
When the Precision Kettle is first
placed on the base, the display will
show 212°F or 100°C*. After a few
moments, the display will update to
show the actual temperature of the
water in the Precision Kettle.
2
Press the “-” or “+” buttons to select
your desired water temperature
between 140-212°F (60-100°C).
For faster temperature adjustment,
hold the “-” or “+” button down
for 3 seconds, and the temperature
readout will scroll faster.
NOTE: The temperature can be displayed in Celsius (C) or Fahrenheit (F). To toggle
between Celsius and Fahrenheit, hold the “-” and “+” buttons down at the same
time. Refer to the “Altitude boiling point reference guide” for information on the peak
temperature setting for your altitude.
NOTE: The button does not function
when the Precision Kettle is off the base.
*The Precision Kettle has a temperature
memory feature for your last selected
temperature (between 140-212°F
[60-100°C]). This feature will determine
the temperature that appears on the
display after the first use.
W11030459A_ENv17.indd 10 4/17/18 11:50 AM
Andere Handbücher für KEK1032
2
Inhaltsverzeichnis
Andere KitchenAid Wasserkocher Handbücher
KitchenAid
KitchenAid 5KEK1522 Bedienungsanleitung
KitchenAid
KitchenAid 5KEK1722 Bedienungsanleitung
KitchenAid
KitchenAid 5KEK1522 Bedienungsanleitung
KitchenAid
KitchenAid KEK1222 Bedienungsanleitung
KitchenAid
KitchenAid KEK1322SS Technisches Datenblatt
KitchenAid
KitchenAid 5KEK1565 Bedienungsanleitung
KitchenAid
KitchenAid 5KEK1522 Bedienungsanleitung
KitchenAid
KitchenAid 5KEK1222A Bedienungsanleitung
KitchenAid
KitchenAid 5KEK1222 Bedienungsanleitung
KitchenAid
KitchenAid KEK1222 Bedienungsanleitung
KitchenAid
KitchenAid KEK1522 Bedienungsanleitung
KitchenAid
KitchenAid 5KEK1522 Bedienungsanleitung
KitchenAid
KitchenAid KEK1722 Bedienungsanleitung
KitchenAid
KitchenAid KEK1565 Bedienungsanleitung
KitchenAid
KitchenAid 5KEK1565 Bedienungsanleitung
KitchenAid
KitchenAid KEK1222HT Bedienungsanleitung
KitchenAid
KitchenAid KXC13A Bedienungsanleitung
KitchenAid
KitchenAid KXC03 Bedienungsanleitung
KitchenAid
KitchenAid 5KEK1522 Bedienungsanleitung
KitchenAid
KitchenAid KEK1722 Bedienungsanleitung
