Klein Tools CL100 Bedienungsanleitung
Instruction
Manual
Instruction
Manual
CL100
ENGLISH
www.kleintools.com
For Professionals...Since 1857
®
CL100
A
AC
CL100
AUTO
• 3-1/2 DIGIT
1999 COUNT LCD
• AUTO /MANUAL
RANGE
• MAX HOLD
• DATA HOLD
• BACKLIGHT
• WORKLIGHT
ENGLISH
CL100
Instruction Manual
GENERAL SPECIFICATIONS
The Klein Tools CL100 is a multi-featured clamp meter. It measures AC /DC
voltage, AC current, and resistance. It can also test diodes and continuity.
• Operating Altitude: 2000 meters
• Relative Humidity: 75% max
• Operating Temperature: 0°C /32°F to 40°C / 104°F
• Storage Temperature: -10°C /10°F to 50°C / 122°F
• Accuracy Temperature: 18°C /64°F to 28°C / 82°F
• Temperature Coefficient: 0.1*(specified accuracy) / °C
• Sampling Frequency: 2.5 samples per second
• Dimensions: 8.2" x 3.0" x 1.4"
• Weight: 9.9 oz.
• Calibration: Accurate for one year
• CAT Rating: CAT III 600V
• Accuracy: ± (% of reading + # of least significant digits)
WARNINGS
To ensure safe operation and service of the tester, follow these instructions.
Failure to observe these warnings can result in severe injury or death.
• Before each use, verify meter operation by measuring
a known voltage or current.
• Never use the meter on a circuit with voltages that exceed the
category based rating of this meter.
• Do not use the meter during electrical storms, or in wet weather.
• Do not use the meter or test leads if they appear to be damaged.
• Ensure meter leads are fully seated, and keep fingers away from
the metal probe contacts when making measurements.
• Do not open the meter to replace batteries while the probes
are connected.
• Use caution when working with voltages above 60V DC,
or 25V AC RMS. Such voltages pose a shock hazard.
• To avoid false readings that can lead to electrical shock,
replace batteries if a low battery indicator appears.
• Unless measuring voltage or current, shut off and lock out
power before measuring resistance or capacitance.
• Always adhere to local and national safety codes. Use individual
protective equipment to prevent shock and arc blast injury where
hazardous live conductors are exposed.
SYMBOLS
~
AC Alternating Current Warning or Caution
DC Direct Current Dangerous levels
DC/AC Voltage or Current Double Insulated Class II
Ground Safe for disconnect
from live conductors
AC Source
ENGLISH
CL100
1
3
4
2
A
AC
CL100
AUTO
B
I
C
D
G
I
H
F
E
A
1
On Back
AUTO
A
AC
AUTO
A
AC
PRESS
I. Backlight /Worklight
• Press button to activate worklight and backlight.
• Lights will turn off automatically after 15 seconds.
• Worklight only operates during AC current measurement.
• Using lights drains the battery significantly.
1. AC Current: < 600A
Features:
HOLD MAX WORKLIGHTRANGE
• Center wire in guides for best accuracy.
• Opposing currents cancel (use line-splitter when necessary).
2. AC /DC Voltage: < 600V
Features:
HOLD MAX RANGE
• Select AC or DC voltage source.
Auto Power-Off
• Device will power off after 15 minutes non-use.
• Turn the dial or press a button to wake.
• Press the
HOLD
button while turning on to disable
Auto Power-Off feature.
FUNCTION INSTRUCTIONS
FEATURE DETAILS
A. Use CAT III rated leads or higher.
Do not attempt to measure more than 600V or
any current on lead input.
B. Keep hands below line when measuring high current levels.
C. Select Functionality Button
• Switch between AC and DC.
• Switch between and .
D. Max Hold
• Press to hold the maximum value on the display.
• Press again to return to live reading.
E. Auto/Manual Range
• Press repeatedly to cycle through manual ranges.
• Hold for 2 seconds to return to auto ranging mode.
•
AUTO
is displayed on LCD only during auto ranging mode.
F. Data Hold
• Press to hold the current input on the display.
• Press again to return to live reading.
G. H. Battery Replacement
• When indicator is displayed on the LCD,
batteries must be replaced.
• Remove the back screw and replace 3 x AAA batteries.
ENGLISH
AUTO
A
AC
PRESS
TO SELECT
Diode
Continuity
AUTO
A
AC
AUTO
A
AC
• Do not measure resistance on a live circuit.
3. Diode /Continuity
Diode Features:
HOLD
Display shows:
• Forward voltage drop if forward biased.
• “O.L.” if reverse biased.
4. Resistance: <20MΩ
Features:
HOLD RANGE
Continuity Features:
HOLD
• Display shows resistance.
• Buzzer sounds if less than 60Ω.
SYMBOLS USED ON LCD
~
AC Measurement DC Measurement
-
Negative DC Value
MAX
Maximum Reading
Low Battery
AUTO
Auto Range Active
HHold Active
A
Current in Amps
V
Voltage Measurement Diode Test
Ω
Resistance in Ohms Continuity Test
m
Milli 10
-3
k
Kilo 10
M
Mega 10
6
ELECTRICAL SPECIFICATIONS
DC Voltage Measurement
Range Resolution Accuracy
200mV 0.1mV
± (0.8% + 2 digits)
2V 0.001V
20V 0.01V
200V 0.1V
600V 1V ± (1.0% + 2 digits)
Overload Protection:
• 200mV range: 250V DC /AC RMS
• 2V-600V ranges: 600V DC /AC RMS
Input Impedance: 10MΩ.
AC Voltage Measurement
Range Resolution Accuracy
200mV 0.1mV ± (1.0% + 10 digits)
2V 0.001V
± (1.0% + 5 digits)20V 0.01V
200V 0.1V
600V 1V ± (1.5% + 5 digits)
Overload Protection:
• 200mV range: 250V DC / AC RMS
• 2V-600V ranges: 600V DC /AC RMS
Input Impedance: 10MΩ
Response: Averaging
AC Current Measurement
Range Resolution Accuracy
2A 0.001A ± (3.5% + 20 digits)
≤
0.5A
2A 0.001A ± (3.0% + 10 digits) >0.5A
20A 0.01A ± (3.0% + 10 digits)
200A 0.1A ± (2.5% + 10 digits)
600A 1A ± (1.5% + 5 digits)
Frequency Range: 50 to 60Hz
Response: Averaging
Resistance Measurement
Range Resolution Accuracy
200Ω0.1Ω
± (1.2% + 2 digits)
2kΩ0.001kΩ
20kΩ0.01kΩ
200kΩ0.1kΩ
2MΩ0.001MΩ
20MΩ0.01MΩ± (2.0% + 5 digits)
Overload Protection: 250V
Open Circuit Voltage: 0.25V
CUSTOMER SERVICE
KLEIN TOOLS, INC.
450 Bond Street
Lincolnshire, IL 60069
1-877-287-6603
www.kleintools.com
1-877-775-5346
www.kleintools.com
ENGLISH
WARRANTY
This product is warranted to be free from defects in materials and workmanship
for a period of two years from the date of purchase. During this warranty period,
Klein Tools has the option to repair or replace or refund the purchase price of
any unit which fails to conform to this warranty under normal use and service.
This warranty does not cover damage which occurs in shipment or failure which
results from alteration, tampering, accident, misuse, abuse, neglect, or improper
maintenance. Batteries and damage resulting from failed batteries are not
covered by warranty. A purchase receipt or other proof of original purchase date
will be required before warranty repairs will be rendered.
Any implied warranties, including but not limited to implied warranties of
merchantability and fitness for a particular purpose, are limited to the express
warranty. Klein Tools shall not be liable for loss of use of the instrument or other
incidental or consequential damages, expenses, or economic loss, or for any
claim or claims for such damage, expenses or economic loss.
Some states or countries laws vary, so the above limitations or exclusions may
not apply to you. This warranty gives you specific legal rights, and you may also
have other rights which vary from state to state. If your Klein product requires
repair or for information on how to exercise your rights under the terms of this
warranty, please contact Klein Tools at 1-877-775-5346.
CLEANING
Turn instrument off and disconnect test leads. Clean the instrument by using
a damp cloth. Do not use abrasive cleaners or solvents.
STORAGE
Remove the batteries when instrument is not in use for a prolonged period of
time. Do not expose to high temperatures or humidity. After a period of storage
in extreme conditions exceeding the limits mentioned in the Specifications
section, allow the instrument to return to normal operating conditions before
using it.
DISPOSAL /RECYCLE
Caution: This symbol indicates that equipment and its accessories
shall be subject to a separate collection and correct disposal.
139557T
Diode Test
Forward DC Current Resolution Reverse DC Voltage
Appx. 1mA 0.001V Appx. 1.5V
Continuity Test
Overload Protection Resolution Open Circuit Voltage
250V 0.1mΩAppx. 0.45V
Inhaltsverzeichnis
Andere Klein Tools Multimeter Handbücher
Klein Tools
Klein Tools MM600 Bedienungsanleitung
Klein Tools
Klein Tools MM400 Bedienungsanleitung
Klein Tools
Klein Tools MM200 Bedienungsanleitung
Klein Tools
Klein Tools 69193 Gebrauchs- und Pflegehandbuch
Klein Tools
Klein Tools MM500A Bedienungsanleitung
Klein Tools
Klein Tools MM2300A Bedienungsanleitung
Klein Tools
Klein Tools MM320 Bedienungsanleitung
Klein Tools
Klein Tools CL110 Bedienungsanleitung
Klein Tools
Klein Tools MM325 Bedienungsanleitung
Klein Tools
Klein Tools MM100 Bedienungsanleitung
Klein Tools
Klein Tools MM2000 Bedienungsanleitung
Klein Tools
Klein Tools MM500 Bedienungsanleitung
Klein Tools
Klein Tools MM1000 Bedienungsanleitung
Klein Tools
Klein Tools CL1000 Bedienungsanleitung
Klein Tools
Klein Tools MM200 Bedienungsanleitung
Klein Tools
Klein Tools MM300 Bedienungsanleitung
Klein Tools
Klein Tools MM700 Bedienungsanleitung
Klein Tools
Klein Tools MM400 Bedienungsanleitung
Klein Tools
Klein Tools MM720 Bedienungsanleitung
Klein Tools
Klein Tools MM500 Bedienungsanleitung
Beliebte Multimeter Handbücher anderer Marken
Gossen MetraWatt
Gossen MetraWatt METRAmax 6 Bedienungsanleitung
PeakTech
PeakTech 4000 Gebrauchs- und Pflegehandbuch
YOKOGAWA
YOKOGAWA 90050B Bedienungsanleitung
Gossen MetraWatt
Gossen MetraWatt METRALINE DMM16 Bedienungsanleitung
Fluke
Fluke 8846A Bedienungs- und Wartungshandbuch
Tempo Communications
Tempo Communications MM200 Bedienungsanleitung
