5
PRODUCT OVERVIEW
DIMENSIONS
INSTALLATIONS
ACTUATORS
COMMUNICATIONS MODULES
ACCESSORIES
REPLACEMENTS
MAINTENANCE AND OPERATION
FIRE DAMPER - FDC
MODELS
Casings
Actuators
R (R-S)
Manual operating mechanism, optionally with end switches (R-S). In case
of fire, the fire damper closes automatically. Damper closing can be initiated
either by thermal fuse melting, or by manual activation on the operating
mechanism. Upon closure, damper blade is locked in closed position and
can only be opened manually. Thermal fuse melting point is 72 °C.
EMS-S
Electromagnetic operating mechanism, comes with end switches as
standard. In case of fire, the fire damper closes automatically. Damper
closing can be initiated either by thermal fuse melting or remotely by
triggering the electromagnet. Electromagnet is constantly under power and
activates closing of the damper blade in case the power cuts out. Upon
closure, damper blade is locked in closed position and can only be opened
manually. Thermal fuse melting point is 72 °C.
M230-S
Belimo 230 V electro motor operating mechanism, comes with integrated
end switches. In case of fire, the fire damper closes automatically.
Damper closing can be initiated either by thermoelectric release device or
remotely by triggering the electro motor. Upon closure, damper blade is
locked in closed position and can be opened by sending a signal to electro
motor. Standard thermoelectric release point is 72 °C, optional 95 °C.
M24-S
Belimo 24 V electro motor operating mechanism, comes with integrated
end switches. In case of fire, the fire damper closes automatically.
Damper closing can be initiated either by thermoelectric release device
or remotely by triggering the electro motor. Upon closure, damper blade
is locked in closed position and can be opened by sending a signal to
electro motor. Standard thermoelectric release point is 72 °C,
optional 95 °C.
M24-S-ST
Belimo 24 V electro motor operating mechanism, comes with integrated
end switches. In case of fire, the fire damper closes automatically.
Damper closing can be initiated either by thermoelectric release device
or remotely by triggering the electro motor. Upon closure, damper blade
is locked in closed position and can be opened by sending a signal to
electro motor. Standard thermoelectric release point is 72 °C,
optional 95 °C. Actuator is additionally equipped with connection plug for
easy connection with power supply and communication modules.
EX
ATEX rated fire dampers are equipped with Schischek ExMax actuators,
Exbox-TT thermal switches and ExBox plenum boxes.
Optional casing can be produced in AISI316L stainless steel.
Ordering key
FDC25
Cylindrical fire damper with 25 mm damper blade and
fire classification up to EI120S. Sizes range from d100
till d315.
FDC40
Cylindrical fire damper with 40 mm damper blade and
fire classification up to EI120S. Sizes range from d355
till d800.
FDC25 - APP
Cylindrical fire damper with integrated Applique
installation frame with 25 mm damper blade and fire
classification up to EI90S.
Sizes range from d100 till d315.
FDC25 - MF1/MF2
Cylindrical fire damper with integrated MF1 installation
frame with 25 mm damper blade and fire classification
up to EI60S. Sizes range from d100 till d315.
FDC40 - MF2
Fire damper with integrated MF2 installation frame
with 40 mm damper blade and fire classification up to
EI90S. Sizes range from d355 till d800.
(1) Damper type (2) Dimension (3) Mechanism type (4) Mounted accessories
FDC25 - d250 - M230-S - IH
(1)
(2)
FDC25 - d100 to d315
FDC40 - d355 to d800
FDC25-APP - d100 to d315
FDC25-MF1 - d100 to d315
FDC25-MF2 - d100 to d315
FDC40-MF2 - d355 to d800
Damper diameter
d100 till d800
(3)
(4)
R- manual drive
R-S - manual drive with limit switches
M230-S - electric actuator AC/DC 230 V
M24-S - electric actuator AC/DC 24 V
M24-S-ST - electric actuator AC/DC 24 V with
connection plug
EMS-S - electromagnetic drive
EX - ATEX rated Schischek 230/24 V electric actuator
IH - inspection hatch
PRODUCT OVERVIEW
