Klipsch KI-102-SMA-I Bedienungsanleitung

KLIPSCH PERMANENT INSTALLATIONS

OWNER’S MANUAL

IMPORTANT SAFETY INSTRUCTIONS

1. READ these instructions.

2. KEEP these instructions.

3. HEED all warnings.

4. FOLLOW all instructions.

5. DO NOT use this apparatus near water.

6. CLEAN ONLY with dry cloth or lightly damped cloth.

7. DO NOT block any ventilation openings. Install in accordance

with the manufacturer’s instructions.

8. DO NOT install near any heat sources such as radiators, heat

registers, stoves, or other apparatus (including ampliﬁers)

that produce heat.

9. ONLY USE attachments/accessories speciﬁcally designed

for this application

10. USE only with a cart, stand, tripod, bracket, or table

speciﬁcally designed for this application, or sold with the

apparatus. When a cart is used, use caution when moving

the cart/apparatus combination to avoid injury from tip-over.

11. DO NOT expose this apparatus to dripping or splashing and ensure

that no objects ﬁlled with liquids, such as vases, are placed on

the apparatus.

12. DO NOT modify or alter in any way.

13. SWITCH OFF ampliﬁer prior to connecting speakers.

14. DO NOT hang or suspend any items from this apparatus.

The exclamation point, within an equilateral triangle, is intended to

alert the user to the presence of important operating and maintenance

(servicing) instructions in the literature accompanying the product.

The lightning ﬂash with arrowhead symbol within an equilateral

triangle, is intended to alert the user to the presence of

uninsulated “dangerous voltage” within the product’s enclosure that

may be of sufﬁcient magnitude to constitute a risk of electrical shock

to persons.

WARNING: No naked ﬂame sources – such as candles – should be placed

on the product.

WARNING: Neglect to follow the safety and installation instructions may

cause malfunctions resulting in property damage and personal injury

or death.

WARNING: Installation must be done by qualiﬁed personnel to

appropriate standards and/or building codes.

WARNING: Do Not Open! Risk of Electrical Shock. Voltages in this

equipment are hazardous to life. No user-serviceable parts inside. Refer

all servicing to qualiﬁed service personnel.

Klipsch recommends that only qualiﬁed personnel install its loudspeaker

systems. In addition to the load ratings of speaker enclosure pickup points,

rigging hardware and array conﬁgurations, the safety and integrity of any

installation depends on the strength and suitability of the attachment

location. At all times, make sure that the equipment and rigging point

locations are inspected and meet all load requirements with a large margin

of safety. Check all rigging components for defects and corrosion as per

their manufacturer’s recommendations.

Be sure that adequate safety factors are observed, including verifying the

load rating and stress capabilities of attachment hardware, including all

nuts, bolts, brackets and straps. Klipsch additionally recommends backup

retaining straps and/or cinched wirerope for an added measure of safety.

Installations and attachment locations that could present a safety harzard

should be checked and certiﬁed as safe by a professional structural engineer.

After assembly of the components on each speaker system, but before

operation, be sure that all bolts and nuts are double-checked for proper seating

and tightness. Due to the weight and size of the components involved, potential

damage could occur if devices were to become unattached.

The KI Series of products are for use

as a “Single Mount Array”, or SMA.

The suspension hardware is intended

for applications requiring suspension

of an individual loudspeaker.

The multiple suspension points are

available to add ﬂexibility to the

mounting options, but NOT intended to

be used as suspension points for other

loudspeakers.

INSTALLATION

KI-102-SMA-II | KI-172-SMA-II

The optional SB-102 accessory bracket is speciﬁcally designed for the KI-102-SMA-II and

KI-172-SMA-II loudspeaker systems. The bracket provides up to four attachment points

to the securing surface and two attachment points to the speaker. When installing the

bracket, the attachement point (2” x 4” stud, Unistrut, “I” beam, etc.) must be made

with bolts that will securely hold the bracket to the mounting surface, which must be

load-rated to hold the speaker safely in place.

After the bracket is installed, mount the speaker to the bracket by ﬁrst removing the

factory-attached screws on the top and bottom of the speaker. The bracket comes with

two 1/4” 20-thread knobs and washers, which will attach the bracket to the speaker. Slide

the speaker over the bracket and align the hole in the bracket with the threaded hole in

the speaker. Attach the knob screw and washer provided, and secure the screw. Do the

same to the bottom. Adjust the angle of the speaker to the desired location and tighten

both knob screws.

On the KI-172-SMA-II, additional internal mounting bolts are installed for the attachment

of readily available Omnimount® and other compatible brackets. Before completing

any installation using these devices, be sure that all hardware is ﬁrmly attached and

tightened, as recommended.

KI-102-SMA-II

KI-172-SMA-II

KI-262-SMA-II | KI-272-SMA-II | KI-362-SMA-II

KI-396-SMA-II | KI-115-SMA-II | KI-215-SMA-II

The KI-396-SMA-II, KI-362-SMA-II, KI-262-SMA-II utilize sixteen 3/8” -16 threaded

suspensions points with the KI-272-SMA-II and KI-115-SMA-II using twelve and four

suspension points respectively. The locations for these threaded mounting points

are compatible with readily available commercial rigging bars.

For the KI-115-SMA-II, Klipsch recommends use of the four rear panel suspension

points for face-down orientation.

Internal metal brackets that distribute the load to adjacent enclosure panels

back each individual mounting point.

Klipsch recommends that only professional-grade rigging components,

appropriately rated straight bolts and welded eye bolts are used. Additionally,

safety backup straps or wirerope should be installed for added measure of

rigging safety.

VISIT KLIPSCH.COM/PRO TO VIEW SPECIFICATION SHEETS FOR INDIVIDUAL FLY

POINT LOCATIONS BY MODEL.

KI-396-SMA-II

KI-215-SMA-II

KI-272-SMA-II

KI-362-SMA-II

KI-115-SMA-II

KI-262-SMA-II

ARRAY CONFIGURATIONS

EASE data is available on all KI series

speakers at KLIPSCH.COM/PRO. Klipsch

urges users to refer to this data when

determining how speciﬁc speaker systems

should be installed for optimum performance.

Although toed-out suggestions for coverage

patterns are suggested below, these

loudspeakers do not necessarily have to be

toed-out when installed in an array. There

can be pattern overlap, which will increase

output in that region, although with lobing

side effects.

NOTE: EACH SPEAKER SHOULD BE

SUSPENDED INDIVIDUALLY WHEN

FORMING THE LOUDSPEAKER ARRAY.

The KI-102-SMA-II, KI-362-SMA-II and

KI-396-SMA-II systems have horizontal

coverage patterns of 90º. The side panels

are angled at 22.5º, so two speakers tightly

aligned create a 45º angle between the axes.

As this accounts for only half of an individual

speaker’s total coverage angle, the speakers

would need to be toed-out to 90º (included

angle), to provide the smoothest pattern and

180º of total coverage.

The KI-262-SMA-II has a 60º coverage

pattern, with side panels angled at 22.5º. Two

enclosures tightly aligned create an angle of

45 degrees, and therefore would need to be

toed out an additional 15 degrees (included

angle) to form a 60º angle between axes,

creating 120º total coverage.

The KI-172-SMA-II and KI-272-SMA-II are

asymmetrical enclosures, and therefore offer

multiple mounting angle options. Note that

their coverage patterns are the same as the

KI-102-SMA-II and KI-262-SMA-II, respectively.

Please refer to the EASE data on

KLIPSCH.COM/PRO for speciﬁc coverage

pattern information on the KI-115-SMA-II and

KI-215-SMA-II low-frequency enclosures. The

KI-215-SMA-II matches the KI-362-SMA-II

enclosure form.

Klipsch recommends that power provided to the

speakers not exceed the values indicated in the

speciﬁcations by more than 3dB. If continuous

power or thermal ratings are exceeded, the

internal protective KLIP circuit will shut down the

high- or high/mid-frequency sections. These will

remain shutdown until input power is reduced

signiﬁcantly. The KLIP circuit monitors continuous

average power. Although unlikely, it is possible to

create a situation where extreme transient signals

could damage componenet diaphragms before

triggering the KLIP protection circuit.

(KI-396-SMA-II does not feature KLIP circuit driver

protection) USE CAUTION WITH HIGH POWER!

Damage can also occur due to distortion generated

from underpowering, i.e. overdriving with too

little power. Klipsch recommends that ampliﬁer

headroom be based on values 3dB above the

maximum speaker power ratings, or twice the

published numerical power rating of the speaker.

For example, the KI-102-SMA-II is rated at 200

watts continuous. A 3dB continuous headroom

factor would suggest a 400-watt ampliﬁer.

POWER REQUIREMENTS

KI-362-SMA-II VARIPOINT™ ADJUSTMENT

The KI-362-SMA-II three-way loudspeaker system provides for

pattern adjustment by rotating the position of the high- and mid-

frequency VariPoint module. To accomplish this, ﬁrst determine

the desired orientation of the Varipoint module. This should be

established before the speaker is suspended. While the speaker is

on its back, remove the eight #10 24-thread screws attaching the

high- and mid-frequency horn module to the front bafﬂe. Rotate

the bafﬂe to the desired position and reattach. Make sure that the

screws are fastened tightly. The module can be adjusted in 45º

increments, to eight possible positions.

DO NOT ATTEMPT THIS OPERATION WHILE THE

SPEAKER IS UPRIGHT!

10-24 UNC Screws

INPUT CONNECTIONS

All KI products feature a simple

2 pt. barrier strip input.

3502 WOODVIEW TRACE, INDIANAPOLIS, IN, USA

KLIPSCH.COM/PRO

Klipsch and Keepers of the Sound are trademarks of Klipsch Group, Inc., registered in the United States and other countries. OmniMount is a registered trademark of Ergotron, Inc.

V08 - 0727

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Klipsch Sprecher Handbücher

Klipsch

Klipsch IC-400-T Bedienungsanleitung

Klipsch

Klipsch RC-64 III Bedienungsanleitung

Klipsch

Klipsch Reference Series RSX-3 Bedienungsanleitung

Klipsch

Klipsch KS-24 Bedienungsanleitung

Klipsch

Klipsch Reference Sattelite Speaker Bedienungsanleitung

Klipsch

Klipsch THX ULTRA2 Bedienungsanleitung

Klipsch

Klipsch Palladium P-17B Bedienungsanleitung

Klipsch

Klipsch ULTRA2 KL-650-THX Bedienungsanleitung

Klipsch

Klipsch CS Architectural Bedienungsanleitung

Klipsch

Klipsch ProMedia 2.1 Wireless Bedienungsanleitung

Klipsch

Klipsch SYNERGY SERIES SPEAKER Syn.3 03 Bedienungsanleitung

Klipsch

Klipsch R-5650-S Bedienungsanleitung

Klipsch

Klipsch ProMedia Ultra 5.1 Bedienungsanleitung

Klipsch

Klipsch THX ULTRA2 Bedienungsanleitung

Klipsch

Klipsch REFERENCE Floorstanding Speaker Bedienungsanleitung

Klipsch

Klipsch Reference Series RF-7 II Bedienungsanleitung

Klipsch

Klipsch LightSpeaker 5.2.0 Bedienungsanleitung

Klipsch

Klipsch R-15PM Bedienungsanleitung

Klipsch

Klipsch Cornwall III Bedienungsanleitung

Klipsch

Klipsch Groove Bedienungsanleitung

Klipsch

Klipsch Reference Series RS-10 Bedienungsanleitung

Klipsch

Klipsch Icon WB-14 Bedienungsanleitung

Klipsch

Klipsch R-2650-CSM Bedienungsanleitung

Klipsch

Klipsch AW-525 Bedienungsanleitung

Beliebte Sprecher Handbücher anderer Marken

argon audio

argon audio IE20 Bedienungsanleitung

Denon

Denon SC-N7 Bedienungsanleitung

Gemline

Gemline Ace 3952 Bedienungsanleitung

Focal

Focal ON WALL 300 Bedienungsanleitung

HEADRUSH

HEADRUSH Maximus HRSP 5024 Bedienungsanleitung

SoundLogic

SoundLogic BCCS-6/6395 Bedienungsanleitung

Peavey

Peavey DTH 218 Bedienungsanleitung

Avantree

Avantree Pluto Air Bedienungsanleitung

Morel

Morel Integra Series INTEGRA OVATION 4 Bedienungsanleitung

Oppo

Oppo SONICA Bedienungsanleitung

Bose

Bose SoundLink Wireless Music System Bedienungsanleitung

Rocksteady

Rocksteady Stadium Bedienungsanleitung

Bowers & Wilkins

Bowers & Wilkins 4 Bedienungsanleitung

Sonance

Sonance SONOS OUTDOOR Series Bedienungsanleitung

Electro-Voice

Electro-Voice EVID FM4.2 Bedienungsanleitung

Pioneer

Pioneer XW-HTD630 Bedienungsanleitung

Onn

Onn BWA16AA002 Bedienungsanleitung

HP GL313AA - USB Speakers PC Multimedia Bedienungsanleitung