Klipsch T10 ANC Bedienungsanleitung
©Copywrite 2021 EAR Micro
EAR Micro and Klipsch Audio have partnered to design, engineer, and produce the world’s most
sophisticated luxury hearables product—an ear-computer. It’s like mixing the brains of a smart-
watch, with the form-factor of an earphone. Our T10 ear computers are the smallest in the world,
and offer the highest audio performance of any in-ear listening instrument.
EAR Micro’s T10 Bespoke Ear Computers are hand-made luxury items. They are assembled entirely
by artisanal craftsmen in Kansas City, MO, and are built in small-batch quantities—just like a fine
Swiss timepiece—using precision ceramics and precious metals. T10 Bespoke can be accessorized and
customized in an infinite number of ways to achieve individual creations as unique as their owner.
4043 Broadway
Kansas City, MO 64111
www.T10Bespoke.com
©Copywrite 2021 EAR Micro
Table of Contents
A. Getting Started
a. First Time Unboxing
b. Power On the Buds
c. Connecting Buds to a Phone
i. Pairing with an Android Phone
ii. Pairing with an iPhone
d. Power Off the Buds
B. Charging
a. Opening/Closing Charger Doors
b. Removing/Replacing Buds
c. Charger User Interface
i. Open Door
ii. Button Gestures
d. Charging the Charger
i. Qi Charging
ii. Full Buds Battery
iii. Full Charger Battery
e. Low Charger Battery
C. Bud Gestures
a. Touch User Interface
b. Voice, Sound, LED Feedback
c. Head Gestures
d. Voice User Interface
D. T10 Companion Phone App
a. Equalization
i. Settings
ii. Set-It-And-Forget-It
©Copywrite 2021 EAR Micro
Getting Started
First Time Unboxing
The T10s ear computers will be “Sleeping” packaged inside the charger. While “Sleeping” the buds use
almost no power and can be awakened by pushing the button on the front of the charger.
When you press the button the LEDs above the button will light up. Your buds are awake and ready for
use.
Power On the Buds
To power on the buds simply open the charger doors. The charger has “Gull-Wing” doors that hinge
from the top. Hold the bottom of the door and lift up and each door will open. You can now just pull
each bud from the charger.
©Copywrite 2021 EAR Micro
Connecting Buds to a Phone
After Removing the buds from the charger, your buds will be in Pairing Mode.
Pairing with an iPhone
From your iPhone Settings screen, select Bluetooth option.
Now select “Klipsch T10 ANC” listed under Other Devices. You will hear a voice prompt that says “Now
we’re talking…” and the LEDs on the buds will flash to indicate that you have successfully paired them to
your phone.
©Copywrite 2021 EAR Micro
Pairing with an Android Phone
Find your Bluetooth settings…it can generally be accessed by dragging the screen down from the top.
Find the “Klipsch T10 ANC” from the Available Devices section. You will probably need to select Pair
from the pairing message box to complete the pairing process.
Powering Off the Buds
You can power off the buds by putting them back into the charging case. The case will charge the buds
fully and then put the buds back “Sleep” to conserve the battery. To manually put the buds to “Sleep”,
you can double-touch the button on the front of the charger and 3 LEDs will flash to indicate that both
the buds and the charger are in “Sleep” mode.
©Copywrite 2021 EAR Micro
Charging
Opening/Closing the Doors
Your T10 Charger has “Gull-Wing” doors that hinge at the top to keep your precious buds securely in
place. To Open the doors simply lift the door gently from the bottom and the spring will do the rest to
fully open the charger door and reveal your brand new T10s. To Close the door one finger will do. Just
nudge it back closed until the magnetic closure snaps the door into the closed position.
Removing/Replacing the Buds
Once the doors are opened you can grasp the sides of the buds to remove them from the case. Be
careful not to touch the Klipsch logo face as it is a touch interface and inadvertently answer a phone call,
start playing music or some other function.
When putting the buds back into the charger, we recommend placing the ear tip in first and then
rotating the bud to fully seat it in the charger.
After closing the both doors you will see the red LED through the window on the charger door turn off
after a few seconds. The buds will charge and the charger will put them to “Sleep” when fully charged.
Charger User Interface
Open Door
Upon Opening either door the LEDs on the charger will sequence from the open door across the 5 LEDs
and cycle back off to indicate the door has been opened. The LEDs will then sequence from the open
door across the charger to indicate the battery level in the bud with the open door. A single LED
illuminated closest to the open door indicates the bud’s battery is between 10% and 30% charged. Two
LEDs means between 30% and 50%, three LEDs is between 50% and 70%, four LEDs is between 70% and
90%, five LEDs is greater than 90%. No LEDs lit means it needs to be charged.
Button Gestures
The button on the charger gives you several functions on the charger and buds while the buds are in the
charger. A quick press and release of the button is what we refer to as a Touch. A Hold is where you
press the button and hold it down. When holding the button down on the charger, the LEDs will Count
the seconds for you as they illuminate from left to right. Once the charger has reached 5 seconds it will
start back at the left LED position. The count will continue until you release the button or hold for 30
seconds.
©Copywrite 2021 EAR Micro
Single-Touch
A Single Touch requests the battery level in the charger. The LEDs will sequence from the middle
outward to acknowledge the button press and cycle back off. The LEDs will then sequence from the
middle outward to indicate the battery level in the charger. Similar to the battery level in the buds, the
LEDs indicate 10% to 30%, 30% to 50%, 50% to 70%, 70% to 90%, and above 90%.
Double-Touch
A Double-Touch will put both buds and the charger into a “Sleep” mode. This is a power saver and is
particularly useful to save battery life in both the buds and the charger.
1-Second Hold
A 1-Second Hold will wake the buds from “Sleep”, allow them enter pairing mode, and attempt to pair
with a previously paired phone all before removing them from the charger.
10-Second Hold
Should the need arise to reset the buds, a 10-Second Hold of the charger button with the buds in the
charger and the doors closed will perform a quick reboot of the buds.
30-Second Hold
Should the need arise to reset the charger, a 30-Second Hold of the charger button will perform a quick
reboot of the buds.
Charging the Charger
Qi Charging
The T10 charger can be charged with the optional wireless mini puck that is supplied by EAR Micro or
most any Qi compatible wireless chargers. When the T10 Charger is properly placed on the wireless
charger, the wireless Charger should have an indicator that the T10 Charger is charging. The lights on
the T10 Charger will also cycle in a back-and-forth sequence to let you know the T10 Charger is charging
If using our mini puck, the light in the base of the puck will illuminate. The mini puck mates perfectly
with the T10 Charger because it is contoured to the exact shape of the T10 charger. Magnets hold the
mini puck and the T10 Charger in the proper alignment.
©Copywrite 2021 EAR Micro
Full Bud Batteries
Any time the batteries in the buds are fully charger the charger puts the buds into “Sleep” mode to
conserve the charge on the batteries. A 1-Second hold of the button on the charger will “Wake” the
buds.
Full Charger Battery
When the battery in the T10 Charger has reach fully charger the back-and-forth LED sequence will halt
while on the Qi wireless charger.
Low T10 Charger Battery
If the battery in the T10 Charger gets to a significantly low state and you haven’t placed it on a Qi
compatible wireless charger the T10 Charger will automatically turn off the buds and the charger to help
reduce the drain on the charger battery. You can simply perform a 1-Second Hold to power the charger
back on. This will provide several minutes of charging before the charger cycles off again.
©Copywrite 2021 EAR Micro
Bud Gestures
Touch User Interface
The logo or face of the buds contain a touch surface that you can touch to interact with each bud. There
are multiple gestures that you can perform to activate different features. The figure below shows the
touch surface outlined in red. The front is closest to the ear tip for each bud.
Basic Touch Gestures
The basic gestures are Single-Touch, Double-Touch, Holds, Rocker Forward, Rocker Backward, Swipe
Forward, Swipe Backward. A Single-Touch is when you place your finger on all three areas (front,
middle, and back) on touch surface and then release quickly. A Double-Touch is when you touch and
release twice on the three areas within 1 second. A Hold is similar to a Touch except you hold your
finger for a time without moving it from the touch surface. A Rocker Forward is when you touch and
release just the front area and a Rocker Backward is when you touch and release just the back area. A
Swipe Forward is when you touch the back area momentarily and then slide your finger forward to the
front area before releasing your touch. A Swipe Backward is when you touch the front area
momentarily and then slide your finger to the back area.
Enhanced Gesture Mode
A Double-Touch will put the bud into Enhanced Gesture Mode that will pass all future gestures directly
to the Companion App until another Double-Touch. A Double-Touch will Toggle this feature. This can
be used to execute sophisticated actions setup in the App. This feature is coming in the future. Be
Aware When In Gesture Mode Buds Ignore All Gestures Except Double-Touch!
Inhaltsverzeichnis
Andere Klipsch Sprecher Handbücher
Klipsch
Klipsch THX ULTRA2 KL-525-THX Bedienungsanleitung
Klipsch
Klipsch RW-1 Bedienungsanleitung
Klipsch
Klipsch Gallery G-17 Air Bedienungsanleitung
Klipsch
Klipsch F200 Bedienungsanleitung
Klipsch
Klipsch Reference Premiere RP-8060FA Bedienungsanleitung
Klipsch
Klipsch Reference Series RF-82 II Bedienungsanleitung
Klipsch
Klipsch KL-6504-THX Bedienungsanleitung
Klipsch
Klipsch R-28PF Bedienungsanleitung
Klipsch
Klipsch VF-35 Bedienungsanleitung
Klipsch
Klipsch KHC-6 Bedienungsanleitung
Klipsch
Klipsch R-14PM Bedienungsanleitung
Klipsch
Klipsch KI-102 Bedienungsanleitung
Klipsch
Klipsch Icon Series Bedienungsanleitung
Klipsch
Klipsch the One II Bedienungsanleitung
Klipsch
Klipsch CDT-5650-C Bedienungsanleitung
Klipsch
Klipsch CP-4 Bedienungsanleitung
Klipsch
Klipsch KHO-7 Bedienungsanleitung
Klipsch
Klipsch THE FIVES Bedienungsanleitung
Klipsch
Klipsch Synergy Series KAW 1.1 Beilage
Klipsch
Klipsch R-4B Bedienungsanleitung
Beliebte Sprecher Handbücher anderer Marken
Bowers & Wilkins
Bowers & Wilkins 4 Bedienungsanleitung
Sonance
Sonance SONOS OUTDOOR Series Bedienungsanleitung
Electro-Voice
Electro-Voice EVID FM4.2 Bedienungsanleitung
Pioneer
Pioneer XW-HTD630 Bedienungsanleitung
Onn
Onn BWA16AA002 Bedienungsanleitung
HP
HP GL313AA - USB Speakers PC Multimedia Bedienungsanleitung