KMC Controls VEP–3420 Series Bedienungsanleitung

Installation Guide

3/4" & 1" 3-Way Diverting Electronic Control Valves

VEP–3420, 3421 Series

NOTE: Models do not include

HMO–5026/5027 MPT unions as

shown. Order separately.

DIMENSION REFERENCE

ABCD

3/4" MPT 3 13/16" (97) 2 3/4" (70) 5 1/8" (130)

1" MPT 4 1/16" (103) 3 1/8" (79) 5 7/8" (149)

Mounting

Valves are sized to meet the system demand and may

be smaller than the supply lines.

1. Clean the lines upstream from the valve. Remove

any debris > .06" (.15 mm)

2. Install as close as possible to the coil in a vertical

position (actuator over the valve).

CAUTION: Mount valve with the actuator in the

upright position, or at most a 45° angle, to prevent

condensation collecting in the actuator housing.

3. Align system flow with arrow on valve.

4. The MPT unions are not provided and must be

ordered separately.

3/4" valves Order: Three HMO–5026s

1" valves Order: Three HMO–5027s

5. Seal valves with approved valve sealant

6. Allow a minimum clearance of 1-1/2 " (38mm)

between the top of the actuator and the nearest

obstruction. Allow sufficient side clearance for

servicing the valve.

Required Tools

• digital voltmeter

• small screwdriver

• 2 wrenches

KMC Controls

P.O. Box 497

19476 Industrial Drive

New Paris, IN 46553

U.S.A.

TEL: 574.831.5250

FAX: 574.831.5252

E-mail: [email protected]

063-019-01C

Wiring

Valves may be connected with 3/8" flexible conduit using a HMO–4530 adaptor (not included).

The VEP–3420/33421 series come with a 2 conductor, 18 AWG, heat resistant cable. The actuators are wired

for normally closed condition.

• Blue - neutral

• Brown - hot

Maintenance

No routine maintenance is required. Each component is designed for dependable, long term reliability and

performance. Careful installation will ensure long term performance. Limit field repairs to replacement of

the complete bonnet assembly or valve disc.

VEP VALVE

TOP

HMO-4530

ADAPTER FOR

3/8" FLEXIBLE

CONDUIT

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere KMC Controls Steuereinheit Handbücher

KMC Controls

KMC Controls VEP-34190186 Bedienungsanleitung

KMC Controls

KMC Controls VEB-4303-SDL Series Bedienungsanleitung

KMC Controls

KMC Controls HPO-9001 Bedienungsanleitung

KMC Controls

KMC Controls VEP-43 Series Bedienungsanleitung

KMC Controls

KMC Controls VEB-53 Series Bedienungsanleitung

KMC Controls

KMC Controls KMD-5567 Bedienungsanleitung

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung