KNEX Dancing Robot Bedienungsanleitung
K’NEX Dancing Robot Copyright © K’NEX User Group 2008 Page: 1
K’NEX Dancing Robot
The K'NEX Dancing Robot kit includes 2 x K'NEX Control Motor, and all the K'NEX parts needed to build the robot.
In addition to the kit, you will need either:
1. Learn & Go computer control box, with a battery holder and 4 x "C" batteries, or
2. Egg-Box computer control box, with a battery holder and 4 x "C" batteries.
If you buy your Learn & Go from us, you will receive a free 4 x "C" battery holder.
Note that the instructions provided in this section consist only of a series of photographs of the part-completed and
finished models. Please email us if you feel that any stage of the assembly process is unclear.
<< Stage 1
First, build the three sub-assemblies shown in the photo.
Note that the lug on the Tan Interlocking clip fits inside one of the small holes in the wheel, so that when
the rod is rotated, the wheel is also rotated.
Stage 2 (x2) >>
Then, for each motor, push the blue rod in the
wheel/axle sub-assembly right through the central hole
in the motor.
K’NEX Dancing Robot Copyright © K’NEX User Group 2008 Page: 2
Stage 3 >>
Now attach the other sub-assembly from Stage 1 to one of
the motors, using two red rods...
<< Stage 4
..and attach the second motor, as shown..
Stage 5 >>
Create six more sub-assemblies...
K’NEX Dancing Robot Copyright © K’NEX User Group 2008 Page: 3
Stage 6 >>
..and attach them to stage 4, as illustrated.
<< Stage 7 (Egg-Box)
If you are using an Egg-Box, add the battery holder with batteries inserted, as shown.
K’NEX Dancing Robot Copyright © K’NEX User Group 2008 Page: 4
Stage 8 (Egg-box)>>
Add the Egg-Box, and connect the wires, as shown.
<< Stage 7 to 8 (Learn & Go)
Note that if you are using a Learn & Go box rather than an Egg-Box:
1. In Stage 7, the battery pack should be placed the other way around.
2. You will need to add two white rods, as shown in the photo, to hold the Learn & Go box in place.
Stage 9
You can now “program” your Egg-Box or Learn & Go, in accordance with the instructions provided with that device.
Inhaltsverzeichnis
Andere KNEX Robotik Handbücher
Beliebte Robotik Handbücher anderer Marken
STEMCenter USA
STEMCenter USA Pi-Bot v2.00 Bedienungsanleitung
SunFounder
SunFounder PiDog Bedienungsanleitung
Universal Robots
Universal Robots UR5 Bedienungsanleitung
Universal Robots
Universal Robots E Series Bedienungsanleitung
YASKAWA
YASKAWA MOTOMAN-MPL80 II Bedienungsanleitung
EFORT
EFORT ECR5 Gebrauchsanweisung
