Knightsbridge SN3P Bedienungsanleitung

INSTALLATION & MAINTENANCE MANUAL

SN3P / SN4P

These instructions should be read carefully and retained after installation by the

end user for future reference and maintenance.

These instructions should be used to aid installation of the following products:

SN3P / SN4P

GENERAL INSTRUCTIONS

SAFETY

INSTALLATION

• This product must be installed in accordance with the latest edition of the IEE Wiring

Regulations (BS7671) and current Building Regulations. If in any doubt, consult a

qualiﬁed electrician

• Please isolate mains prior to installation or maintenance

• Please note the IP (Ingress Protection) rating of this product when deciding the location

for installation

• Do not overload this accessory or subject it to conditions outside its rating

• This product is for indoor use only

• This product is IP20 rated

• Provide power to the required point of installation

• Squeezing the tab on the top of the connector to pull the two halves apart (see Fig. 1)

INSTALLATION & MAINTENANCE MANUAL

These instructions should be read carefully and retained after installation by the end user for future reference

and maintenance.

These instructions should be used to aid installation of the following products:

SN3P / SN4P

SAFETY

•This product must be installed in accordance with the latest edition of the IEE Wiring Regulations

(BS7671) and current Building Regulations. If in any doubt, consult a qualified electrician

•Please isolate mains prior to installation or maintenance

•Please note the IP (Ingress Protection) rating of this product when deciding the location for installation

•Do not overload this accessory or subject it to conditions outside its rating

•This product is for indoor use only

•This product is IP20 rated

INSTALLATION

•Provide power to the required point of installation

•Squeezing the tab on the top of the connector to pull the two halves apart (see Fig. 1)

Fig. 1

•Squeeze the sides of each half together to remove the cover (see Fig. 2)

Fig. 2

•Ensuring correct polarity is observed, carefully wire the supply side of the connector as shown in Fig. 3

Fig. 3

•Connect the load side ensuring the correct polarity is observed (see Fig. 4)

INSTALLATION & MAINTENANCE MANUAL

These instructions should be read carefully and retained after installation by the end user for future reference

and maintenance.

These instructions should be used to aid installation of the following products:

SN3P / SN4P

SAFETY

•This product must be installed in accordance with the latest edition of the IEE Wiring Regulations

(BS7671) and current Building Regulations. If in any doubt, consult a qualified electrician

•Please isolate mains prior to installation or maintenance

•Please note the IP (Ingress Protection) rating of this product when deciding the location for installation

•Do not overload this accessory or subject it to conditions outside its rating

•This product is for indoor use only

•This product is IP20 rated

INSTALLATION

•Provide power to the required point of installation

•Squeezing the tab on the top of the connector to pull the two halves apart (see Fig. 1)

Fig. 1

•Squeeze the sides of each half together to remove the cover (see Fig. 2)

Fig. 2

•Ensuring correct polarity is observed, carefully wire the supply side of the connector as shown in Fig. 3

Fig. 3

•Connect the load side ensuring the correct polarity is observed (see Fig. 4)

• Squeeze the sides of each half together to remove the cover (see Fig. 2)

• Ensuring correct polarity is observed, carefully wire the supply side of the connector as

shown in Fig. 3

Fig. 1

Fig. 2

INSTALLATION & MAINTENANCE MANUAL

These instructions should be read carefully and retained after installation by the end user for future reference

and maintenance.

These instructions should be used to aid installation of the following products:

SN3P / SN4P

SAFETY

•This product must be installed in accordance with the latest edition of the IEE Wiring Regulations

(BS7671) and current Building Regulations. If in any doubt, consult a qualified electrician

•Please isolate mains prior to installation or maintenance

•Please note the IP (Ingress Protection) rating of this product when deciding the location for installation

•Do not overload this accessory or subject it to conditions outside its rating

•This product is for indoor use only

•This product is IP20 rated

INSTALLATION

•Provide power to the required point of installation

•Squeezing the tab on the top of the connector to pull the two halves apart (see Fig. 1)

Fig. 1

•Squeeze the sides of each half together to remove the cover (see Fig. 2)

Fig. 2

•Ensuring correct polarity is observed, carefully wire the supply side of the connector as shown in Fig. 3

Fig. 3

•Connect the load side ensuring the correct polarity is observed (see Fig. 4)

Fig. 4

•Check all electrical connections are secure with all exposed copper within the terminal and no loose

strands of cable

•Refit the covers ensuring that the cables are secured by the cord grip

•Push the two halves together until the tab clicks into place

•Switch on and check for correct operation

GENERAL

Clean with a soft dry cloth only, do not use aggressive cleaning products or solvents which may damage the

product.

This product should be recycled in the correct manner when it reaches the end of its life. Check local authorities

for where facilities exist.

WARRANTY

This product has a warranty of 1 year from date of purchase. Failure to install this product in accordance with

the current edition of the IEE Wiring Regulations (BS7671), improper use, or removal of the batch code will

invalidate the warranty. If this product should fail within its warranty period, it should be returned to the place of

purchase for a free of charge replacement. ML Accessories does not accept responsibility for any installation

costs associated with the replacement product. Your statutory rights are not affected. ML Accessories reserve

the right to alter product specification without prior notice.

230V 50Hz, IP20, indoor only

DCxxx22_V1

• Connect the load side ensuring the correct polarity is observed (see Fig. 4)

• Check all electrical connections are secure with all exposed copper within the terminal and

no loose strands of cable

• Reﬁt the covers ensuring that the cables are secured by the cord grip

• Push the two halves together until the tab clicks into place

• Switch on and check for correct operation

Fig. 3

Fig. 4

GENERAL

WARRANTY

Clean with a soft dry cloth only, do not use aggressive cleaning products or solvents which

may damage the product.

This product should be recycled in the correct manner when it reaches the end of its life.

Check local authorities for where facilities exist.

This product has a warranty of 1 year from date of purchase. Failure to install this product

in accordance with the current edition of the IEE Wiring Regulations (BS7671), improper

use, or removal of the batch code will invalidate the warranty. If this product should fail

within its warranty period, it should be returned to the place of purchase for a free of

charge replacement. ML Accessories does not accept responsibility for any installation

costs associated with the replacement product. Your statutory rights are not affected. ML

Accessories reserve the right to alter product speciﬁcation without prior notice.

DCSEP22_V1

SUPPLIED BY:

(UK) MANUFACTURER ML ACCESSORIES LTD,

UNIT E CHILTERN PARK, BOSCOMBE ROAD,

DUNSTABLE LU5 4LT,

WWW.MLACCESSORIES.CO.UK

(EU) SLV LIGHTING GROUP,

DAIMLERSTRASSE 21-23,

52531 ÜBACH-PALENBERG, GERMANY

EMAIL: EPREL@GROUP.SLV.COM

MADE IN CHINA

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Knightsbridge Beleuchtungsausrüstung Handbücher

Knightsbridge

Knightsbridge EMPOWERST Bedienungsanleitung

Knightsbridge

Knightsbridge BT9EMS Bedienungsanleitung

Knightsbridge

Knightsbridge RCTRGB Bedienungsanleitung

Knightsbridge

Knightsbridge BL12LEDS Bedienungsanleitung

Knightsbridge

Knightsbridge BF1430EMS Bedienungsanleitung

Knightsbridge

Knightsbridge WW15C Bedienungsanleitung

Knightsbridge

Knightsbridge VFR7EM Bedienungsanleitung

Knightsbridge

Knightsbridge SPIKE5S Bedienungsanleitung

Knightsbridge

Knightsbridge SLULED Bedienungsanleitung

Knightsbridge

Knightsbridge TRLED EM Series Bedienungsanleitung

Knightsbridge

Knightsbridge SHE P Series Bedienungsanleitung

Knightsbridge

Knightsbridge 12DC40 Bedienungsanleitung

Knightsbridge

Knightsbridge EMPOWERST Bedienungsanleitung

Knightsbridge

Knightsbridge BL12ALEDEM Bedienungsanleitung

Knightsbridge

Knightsbridge TRI Series Bedienungsanleitung

Knightsbridge

Knightsbridge SPIKEGUBK Bedienungsanleitung

Knightsbridge

Knightsbridge UCLCT4 Bedienungsanleitung

Knightsbridge

Knightsbridge OS009 Bedienungsanleitung

Knightsbridge

Knightsbridge SHE S Series Bedienungsanleitung

Knightsbridge

Knightsbridge HBLR Bedienungsanleitung

Knightsbridge

Knightsbridge 12DC36 Bedienungsanleitung

Knightsbridge

Knightsbridge HBN Series Bedienungsanleitung

Knightsbridge

Knightsbridge EMXST Bedienungsanleitung

Knightsbridge

Knightsbridge TNXQUADMWW Bedienungsanleitung

Beliebte Beleuchtungsausrüstung Handbücher anderer Marken

Brizo

Brizo 8SP-MU-4 Bedienungsanleitung

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Bedienungsanleitung

IKEA

IKEA BJÖRKSPIREA Bedienungsanleitung

Laserworld

Laserworld Evolution Series ES-400RGB Bedienungsanleitung

Alien

Alien RG STAR Bedienungsanleitung

EuroLite

EuroLite LED B-40 Bedienungsanleitung

Qazqa

Qazqa Suplux SL 3 Black 103062 Bedienungsanleitung

Commercial Electric

Commercial Electric 54568141 Bedienungsanleitung

CREE LIGHTING

CREE LIGHTING 304 Series Bedienungsanleitung

Goobay

Goobay 49867 Bedienungsanleitung

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Bedienungsanleitung

Alkalite

Alkalite Krypton KT-81 Bedienungsanleitung

Clas Ohlson

Clas Ohlson GU10 Bedienungsanleitung

DTS

DTS DELTA 10 F Bedienungsanleitung

ring

ring Solar Steplight Bedienungsanleitung

One Stop Gardens

One Stop Gardens 57696 Montageanleitung

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Bedienungsanleitung

SIREM

SIREM Swimeo A2 Bedienungsanleitung