OPERATION INSTRUCTIONS
CARE AND MAINTENANCE
2. On/off.
The solar unit automatically switches on when
exposed to light.
your individual requirements.
1. Adjust the welding helmet according to
Adjust the headband in both diameter and height.
Adjust the angle between the face and helmet
also. The recommended angle is 10° - 12°.
10° - 12°
1
10
Clean the helmet with mild soap in lukewarm water.
Clean the welding filter with a clean, lint-free tissue or cloth.
Do not immerse in water.
Poor vision. 1. The cover lens and filter cartridges
are not clean.
2. Lighting conditions are too low.
1. Make certain the cover lens and
filter cartridges are clean.
2. Make certain lighting conditions
are not too low.
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION
Irregular
darkening.
1.When assembling the headgear to
the helmet, if one bolt is on the
upside of the hole, another bolt is on
the downside of the hole.
Auto-darkening
flickers or does
not darken.
1. Front cover lens is soiled.
2. Photo sensors are dirty.
1. Adjust the headband bolts on
both sides to assure they are
both up or both down on the
hole.
1. Clean or replace the front
cover lens.
2. Wipe clean with a soft, lint-free
cloth.
If you have any questions regarding the product, please call customer service at 1-888-3KOBALT,
8 a.m. - 8 p.m., EST, Monday - Friday.
If the headband screws (F) should become missing or lost, replace using two M5.6 x 11.5 bolts.
