Kodak Advantix F350 Bedienungsanleitung
F350 AutoCamera
Consumer Imaging
EASTMAN KODAK COMPANY
Rochester, NY 14650
©EastmanKodakCompany,1999
Pt. No. 9190042 Printed in USA
Kodak
9
Camera
Identification 1234567
8
Unfold front and back cover flaps of manual to view camera diagrams.
ENGLISH/ESPAÑOL/FRANÇAIS
10
11
Unfoldfrontandbackcoverflaps of manual to view camera diagrams.
15
16
17
18
[Photo goes here]
12 13
14
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
NOTE: Your model camera has been tested and found to comply with the limits for a
ClassB digital device,pursuant to Part15 of theFCC Rules. These limitsprovide reason-
able protection against interference in residential use. The camera generates, uses and
can radiate radio frequency energy and, if not used in accordance with the instructions,
maycause interference toradio communications. There isno guarantee thatinterference
will not occur. If this camera does cause interference to radio or television reception,
which can be determined by turning the camera off and on, you may reduce the interfer-
ence by the following:
— Reorient or relocate the receiving antenna.
— Increase the separation between the camera and the receiver.
— Consult the dealer or an experienced radio/television technician for help.
Changes or modifications not approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
This Class B digital apparatus meets all requirements of the Canadian
Interference-Causing Equipment Regulations.
19
LCD
Panel
20
21
1
KODAKADVANTIX
F350 Auto Camera
NEEDHELPWITHYOURCAMERAORMOREINFORMATION
ABOUTTHEADVANCEDPHOTOSYSTEM?
Go to our Web site at http://www.kodak.com (for US) or
http: www.kodak.ca (for Canada) or call: Kodak (US only) from
9:00 a.m. to 7:00 p.m. (Eastern time) Monday through Friday
at 1-800-242-2424.
Kodak (Canada only) from 8:00 a.m. to 5:00 p.m. (Eastern time)
Monday through Friday at 1-800-465-6325, ext. 36100; for the
Toronto area, call 416-766-8233, ext. 36100. When you call,
please have your camera available.
For warranty purposes, please keep your sales receipt as proof
of the date of purchase.
ENGLISH
2
CAMERAFEATURES
Triple format selection
• You can take three different
size pictures: Classic (C), Group/
HDTV (H), and Panoramic (P)
pictures from the same film
cassette. The masking inside
the viewfinder changes to
match each format selection.
Doubleexposure protection(DEP)
• You don’t need to worry about
accidentally re-exposing your
film. Your camera reads the
Film Status Indicator (FSI) on
the film cassette to prevent
double exposures.
Pop-up flash
• The extension of the flash helps
to reduce red eyes in flash
pictures and hand obstruction
in front of the picture-taking lens.
Flash-recycle time
• Long life and quick flash re-
charge times with lithium battery.
Easy, drop-in loading
• Easy, drop-in loading is fast
and virtually error-free. The
camera uses KODAK ADVANTIX
Film. The film cassette com-
municates the status of film
and becomes the carrier and
storage container for the
processed film.
3
Film Status Indicator (FSI)
• A highlighted indicator
advances from one symbol to
another to identify the status
of the film inside the cassette.
4
3
2
1
Look for this logo to be certain that the film
you buy is made for this camera.
Look for this logo to select a certified
photofinisher for developing your film and to
assure that you get all the features of the
Advanced Photo System.
PROCESSEDNEGATIVES
UNEXPOSED
PARTIALLY
EXPOSED
FULLY
EXPOSED
4
CONTENTS
CAMERAIDENTIFICATION .................... 5
ATTACHINGTHESTRAP ....................... 6
LOADINGTHEBATTERY .......................6
Low-batteryindicator ........................ 7
Batterytips ......................................7
Powershutdown .............................. 8
LOADINGTHEFILM .............................. 9
TAKINGPICTURES ............................. 10
Typical print sizes (formats) ........... 12
Tipsforbetterpictures ................... 13
TAKINGFLASHPICTURES ................. 14
Flash-to-subjectdistance ............... 15
USINGTHESELF-TIMER .................... 15
UNLOADINGTHEFILM ........................ 16
Automaticrewind ........................... 16
Manualrewind ............................... 17
CARINGFORYOURCAMERA ............. 18
TROUBLESHOOTING ........................... 19
SPECIFICATIONS ................................ 21
5
1SHUTTER BUTTON
2FILM-REWIND BUTTON
3SELF-TIMER BUTTON
4LCD PANEL
5SELF-TIMER LAMP
6VIEWFINDER
7FLASH
8LENS
9LENS COVER SWITCH
10 STRAP POST
11 FILM-DOOR LEVER
12 FORMAT-SELECTOR SWITCH
13 VIEWFINDER EYEPIECE
14 FLASH-READY LAMP
15 TRIPOD SOCKET
16 BATTERY DOOR
17 FILM CHAMBER
18 FILM DOOR
19 SELF-TIMER INDICATOR
20 PICTURE COUNTER
21 BATTERY SYMBOL
CAMERAIDENTIFICATION
(
see inside cover flaps for camera diagrams
)
6
• Before you remove the old
battery, close the lens cover.
ATTACHINGTHESTRAP
Thread the shorter looped end
of the strap under the
STRAP
POST
(10); pull the longer end
through the shorter loop and pull
it tight.
LOADINGTHEBATTERY
This camera uses one 3 V lithium
KODAK KCR2 (or equivalent)
Battery that supplies power for
all camera operations.
1. Open the
BATTERY
DOOR
(16).
7
Low-battery indicator
It’s time to replace the battery
when the
BATTERY
SYMBOL
(21)
appears on the
LCD
PANEL
(4) or
when the
FLASH
-
READY
LAMP
(14)
takes longer than 15 seconds to
turn on.
2. Place the battery over the
battery-pull strap and insert
into the chamber as shown.
3. Snap the battery door closed.
NOTE: Insert the battery into the
camera before you load
the film.
8
Battery tips
• Dispose of batteries according
to local regulations.
• Remember to keep spare
batteries with you at all times.
• Read and follow all warnings
and instructions supplied by
the battery manufacturer.
• Keep batteries away from
children.
• Do not try to take apart,
recharge or short circuit the
battery, or subject it to high
temperature or fire.
• Store batteries in their original
packaging prior to use.
Power shutdown
To reduce battery power, the
camera will automatically go into
a sleep mode if it is not operated
for more than 4 minutes. You can
awaken the camera by taking a
picture or by closing and
reopening the
LENS
COVER
(9).
When the camera will not be used
for an extended length of time,
turn the camera completely off
to further conserve the
battery power.
Inhaltsverzeichnis
Sprachen:
Andere Kodak Digitalkamera Handbücher
Kodak
Kodak DCS 330 - FIRMWARE VERSION 3.2 AND LATER Bedienungsanleitung
Kodak
Kodak DCS Pro Back Plus Bedienungsanleitung
Kodak
Kodak EasyShare C143 Bedienungsanleitung
Kodak
Kodak KE60 - 35 Mm Camera Bedienungsanleitung
Kodak
Kodak CX7300 - EASYSHARE Digital Camera Bedienungsanleitung
Kodak
Kodak Brownie 127 Bedienungsanleitung
Kodak
Kodak EasyShare C703 Bedienungsanleitung
Kodak
Kodak PIXPRO AZ521 Bedienungsanleitung
Kodak
Kodak DC265 Bedienungsanleitung
Kodak
Kodak Z650 - EASYSHARE Digital Camera Bedienungsanleitung
Kodak
Kodak M753 - EASYSHARE Digital Camera Bedienungsanleitung
Kodak
Kodak EasyShare V603 Bedienungsanleitung
Kodak
Kodak Advantix Advantix Preview Bedienungsanleitung
Kodak
Kodak DX3600 - EasyShare 2MP Digital Camera Bedienungsanleitung
Kodak
Kodak V1233 - Easyshare 12.1MP Digital Camera Bedienungsanleitung
Kodak
Kodak PIXPRO AZ527 Bedienungsanleitung
Kodak
Kodak EASYSHARE MAX Z990 Service-Handbuch
Kodak
Kodak EasyShare M532 Service-Handbuch
Kodak
Kodak DC240 Montageanleitung
Kodak
Kodak CD14 - EasyShare 8.0MP Digital Camera Bedienungsanleitung
