Kodak DIGITAL SCIENCE DC210 Plus Zoom Gebrauchs- und Pflegehandbuch

KODAKDIGITALSCIENCE DC210 Zoom Digital Camera

Firmware Update 3.30 (DC210 to DC210 Plus)

New Features

Note: The following pages were extracted directlyfromthe

User’s Guide for the KODAK DC210 Plus Zoom/DC200 Camera,

KODAK Mounter Software and KODAK Access (TWAIN Acquire) Software.

The purpose of this document is to provide an on-line guide to the

descriptions of the new features for those upgrading fromthe DC210 camera

to the new DC210Plus.

Page numbers will not flow in sequence, but a linked Table of Contents

follows to guide you through this information.

IPS015

Table of Contents

Exposure Lock.....................................................................................................2-5

Preferences.........................................................................................................4-1

Template............................................................................................................4-4

Date Stamp..........................................................................................................4-5

Language............................................................................................................4-12

About...................................................................................................................4-13

Video Out............................................................................................................3-4

BatteryUsage Guidelines....................................................................................2-13

2-5

Capture

Exposure Lock

Use the Exposure Lock to take a sequence of pictures that require the same

exposure. When this setting is activated, the camera maintains a constant

exposure setting.

To turn on Exposure Lock:

To Reset: The Exposure Lock setting automatically resets when the camera is

turned off.

1Set the dial to Capture.

2Turn the camera on.

3Press the button two times.

The Exposure Compensation screen

appears, followed by the Exposure

Lock screen.

☞Press the button a third time to

exit the exposure menu.

4Press a button until ON

is highlighted.

5Press the DO-IT button.

The Take a Picture screen appears.

6Center the area you want to lock the

exposure on in the viewﬁnder

7Press the SHUTTER button to lock in

the exposure setting.

4-1

Preferences

When the Mode dial is set to Preferences, the main Preferences screen appears on

the LCD. Using the Preferences screen the following settings can be adjusted

or activated:

The Preferences screens, illustrated below, display the current setting of

each icon.

✔Quality ✔File type ✔Format memory card

✔Resolution ✔Quickview ✔Video out

✔Template ✔Date/Time ✔Language

✔Date stamp ✔LCD brightness ✔About

Quality

Resolution

File type

Quickview

Date/time

LCD brightness

Format memory card

Current Setting

About

Template

Date stamp

Video out

Language

4-4

Template

The Template screen is used to select a creative border and/or logo that is added

to your picture when the picture is captured. Once a picture is captured with the

template feature activated, the template cannot be removed from the picture. The

templates are stored on your memory card, and you can store up to eight

templates per memory card, depending on the cards size. The memory card

supplied with your camera comes with some templates already pre-loaded.

☞For more information on using templates with your DC200/DC210

camera, refer to the readme ﬁle on the DC200/DC210 software CD.

To select a template:

☞The template is only visible after the picture has been taken with the

camera in either Review mode, or in Capture mode with Quickview

activated. See “Quickview” on page 4-7, or chapter 3 “Review” on page

3-1 for details.

To cancel Template: press a button until OFF is highlighted, and then

press the DO-IT button. The Template setting is maintained until another setting

is selected. This setting does not change when the camera is turned off.

1Set the Mode dial to Preferences.

2Turn the camera on.

The LCD displays the Preferences screen.

3Press a button until the Template icon

is highlighted.

4Press the DO-IT button.

The LCD displays the main Template screen.

The current setting is checked (

5Press a button until the appropriate

option is highlighted.

6Press the DO-IT button.

The main Preferences screen reappears.

4-5

Preferences

Date Stamp

The Date Stamp screen is used to record the date on your pictures.

To turn on the Date Stamp:

☞The date stamp is only visible after the picture has been taken with the

camera in either Review mode, or in Capture mode with Quickview

activated. See “Quickview” on page 4-7, or chapter 3, “Review” on page

3-1 for details.

To cancel Date Stamp: press a button until OFF is highlighted, and then

press the DO-IT button. The Date Stamp setting is maintained until another

setting is selected. This setting does not change when the camera is turned off.

1Set the Mode dial to Preferences.

2Turn the camera on.

The LCD displays the Preferences screen.

3Press a button until the Date Stamp

icon is highlighted.

4Press the DO-IT button.

The LCD displays the main Date

Stamp screen. The current setting is

checked (

5Press a button until the appropriate

date stamp order is highlighted.

6Press the DO-IT button.

The main Preferences screen reappears.

The next time you take a picture the Date

Stamp will appear in the lower right hand

corner of the picture on the LCD screen.

4-12

Language

The Language screen is used to select a language interface for the camera. When

a speciﬁc language is selected, the LCD screens on the back of the camera will

change to reﬂect the language selected.

To select a language:

To change Language: press a button until another language is

highlighted and then press the DO-IT button. The Language setting is maintained

until another is selected. This setting does not change when the camera is

turned off.

1Set the Mode dial to Preferences.

2Turn the camera on.

The LCD displays the Preferences screen.

3Press a button until the Language

icon is highlighted on the third Preference

screen.

4Press the DO-IT button.

The LCD displays the main Language screen.

The current setting is checked (

5Press a button until the appropriate

language is highlighted.

6Press the DO-IT button.

The main Preferences screen reappears.

4-13

Preferences

About

The About screen is a view only screen that keeps a record of the camera’s use.

While viewing the About screen, you can look-up the following information:

✔ﬁrmware version

✔total number of pictures taken over the lifetime of the camera

✔total number of ﬂashes ﬁred over the lifetime of the camera

To view the About screen:

1Set the Mode dial to Preferences.

2Turn the camera on.

The LCD displays the Preferences screen.

3Press a button until the About icon is

highlighted on the third Preferences screen.

4Press the DO-IT button.

The LCD displays the About screen

5Press the DO-IT button to return to the main

Preferences screen.

3-4

Video Out

The video out feature on the DC200/DC210 allows you to connect the camera to

a TV and view or run a slide show of the pictures from the memory card on your

TV! This is especially useful when sharing pictures with family and friends.

☞The camera’s LCD is disabled when the camera is attached to the

video cable.

To view pictures on a TV:

To cancel Slide Show: press the DO-IT button to stop the slide show. The slide

show stops and the main Review screen reappears.

1Turn your TV and the DC200/DC210

camera off.

2Insert the video output cable into the video out

connection on the side of your camera.

3Connect the other end of the cable to the video in

connection on your TV.

4Turn on the camera and TV.

5Set the Mode dial to Review.

6Set the TV to the correct video setting.

The pictures that are stored on the memory card

appear on the TV screen.

☞You may need to adjust theVideo Out

preference on the camera. See “Format

Memory Card” on page 4-10 for details.

7Press a button on the camera to scroll

through the pictures on the TV.

☞To run a slide show, press the DO-IT

button. The slide show starts, and the

pictures change every ﬁve seconds for a

period of ﬁve minutes. If you are using an

AC adapter, the slide show

runs indeﬁnitely.

2-13

Capture

Battery Usage Guidelines

Always follow your battery manufacturer’s directions fully. Do not attempt to

disassemble, recharge, short circuit, or subject the battery to high temperature or

ﬁre. When removing, batteries may be hot, allow them to cool before touching.

Dispose of batteries according to Federal and Local Regulations.

Failure to replace the batteries when they are low may cause the DC210 to shut

down with the camera lens extended.

Your camera has been designed to operate correctly using a variety of AA-size

batteries currently available. These include 1.5-volt alkaline, 1.5-volt lithium, or

1.2-volt Nickel Metal Hydride (Ni-MH) and Nickel Cadmium (Ni-Cd) batteries.

NOT ALL BATTERIES ARE CREATED EQUAL! Battery life depends

signiﬁcantly on age, usage conditions, type and brand. Digital camera

requirements are very demanding on batteries. Not all battery brands perform

well under these challenging conditions. In Kodak lab tests, Ni-MH rechargeable

batteries delivered the best results in a variety of conditions. Ni-MH batteries are

designed for high demand devices like digital cameras, and do not exhibit the

“memory” effects seen with other rechargeable technologies. Kodak offers Ni-

MH rechargeable batteries (with charger) as an optional accessory. Refer to

catalog number 152 7068 (U.S. and Canada), 852 2344 (Europe), 867 9953

(UK), 870 8141 (Asia), 910 7632 (Japan).

If you elect to use alkaline batteries in your camera, you will obtain better

performance from “photo-ﬂash grade” alkaline batteries, such as KODAK

PHOTOLIFEAlkaline Batteries. These types of batteries last more than twice as

long in digital cameras as ordinary alkaline batteries.

Ni-Cd batteries work well in digital cameras, but typically have the shortest “duty

cycle,” or usable power provided between charges.

Lithium batteries typically provide the longest overall battery life, but carry a

higher cost-per-picture than other non-rechargeable battery types.

When using your camera on battery power, we recommend you limit continuous

LCD “Preview” or “Review” to less than 20-minutes per session. If you

anticipate using your camera for longer periods in these modes, it is

recommended that you do so with the camera powered by the AC adapter.

Andere Handbücher für DIGITAL SCIENCE DC210 Plus Zoom

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Kodak Digitalkamera Handbücher

Kodak

Kodak KB28 - 35 Mm Camera Bedienungsanleitung

Kodak

Kodak PIXPRO ORBIT360 4KVR360 Bedienungsanleitung

Kodak

Kodak C1013 - EASYSHARE Digital Camera Service-Handbuch

Kodak

Kodak AFi-II Service-Handbuch

Kodak

Kodak V1253 - EASYSHARE Digital Camera Bedienungsanleitung

Kodak

Kodak DC5000 Bedienungsanleitung

Kodak

Kodak KB 10 Bedienungsanleitung

Kodak

Kodak Z915 - EASYSHARE Digital Camera Bedienungsanleitung

Kodak

Kodak ZD15 - Easyshare Zoom Digital Camera Bedienungsanleitung

Kodak

Kodak ZD710 - EASYSHARE Digital Camera Bedienungsanleitung

Kodak

Kodak M381 - EASYSHARE Digital Camera Service-Handbuch

Kodak

Kodak EasyShare P850 zoom Bedienungsanleitung

Kodak

Kodak EASYSHARE C1450 Bedienungsanleitung

Kodak

Kodak PIXPRO FZ42 Bedienungsanleitung

Kodak

Kodak PIXPRO FZ53-BL Bedienungsanleitung

Kodak

Kodak PLAYTOUCH ZI10 Bedienungsanleitung

Kodak

Kodak EASYSHARE TOUCH M577 Bedienungsanleitung

Kodak

Kodak DCS Pro Back 645 Bedienungsanleitung

Kodak

Kodak DIGITAL SCIENCE DC200 Bedienungsanleitung

Kodak

Kodak DCS 720x Bedienungsanleitung

Kodak

Kodak Pixpro AZ525 Bedienungsanleitung

Kodak

Kodak M790 Bedienungsanleitung

Kodak

Kodak EASYSHARE SPORT C123 Bedienungsanleitung

Kodak

Kodak PRINTOMATIC Bedienungsanleitung

Beliebte Digitalkamera Handbücher anderer Marken

Mercury

Mercury 350K Bedienungsanleitung

Pentax

Pentax Optio LS 465 Bedienungsanleitung

Sanyo

Sanyo VPC-S1085 Bedienungsanleitung

GE SMART A1255 Bedienungsanleitung

Point Grey

Point Grey Gazelle Bedienungsanleitung

Nikon

Nikon COOLPIX A Bedienungsanleitung

Pentax

Pentax P-5 Bedienungsanleitung

BlazeVideo

BlazeVideo A280 Bedienungsanleitung

Sony

Sony MCA-20 Bedienungsanleitung

Sony

Sony Alpha DSLR-A290 Bedienungsanleitung

ATIK Cameras

ATIK Cameras One Bedienungsanleitung

CohuHD Costar

CohuHD Costar 3930 Series Bedienungsanleitung

Leica

Leica M10-R Bedienungsanleitung

FujiFilm

FujiFilm FinePix A700 Bedienungsanleitung

Lorex

Lorex LNZ81P25 Series Bedienungsanleitung

GE J1470S Bedienungsanleitung

Sony

Sony A6700 Benutzerhandbuch

Canon

Canon EOS ELAN7 Bedienungsanleitung