Kodak DirectView 3MP Bedienungsanleitung
Contents
1.Safety Precautions .................................3
2.Auxiliaries ...............................................7
3.Features .................................................8
4.How to Operate ......................................9
5.Connection Method ..............................13
6.Reference.............................................16
7.Assignment of Connector Pins .............17
8.Failure Diagnosis..................................18
9.Cleaning ...............................................19
10.Specications .......................................20
11.Technical Support .................................22
Thank you for purchasing our Color LCD Monitor.
◆Carefully read this User's Manual and use the
product properly. Before using it, also read
"Safety Precautions."
◆Keep the User's Manual as close to you as
possible and in safe custody.
◆If you have lost the manual, contact your dealer.
We will reissue a manual.
Kodak DirectView
CAT 802 6635
3MP Color Display
Model# DV3MC
- 3 -
To reduce the risk of electric shock, Do not remove the back cover.
No-user serviceable parts inside, Refer to qualied service Personnel.
Safety Precautions
Attention, Consult accompanying documents
Dangerous Voltage, Risk of electric shock
FCC Information
FCC
(U.S.Federal Communications Commission)
This equipment has been tested and found
to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in a
residential installation. This equipment
generates, uses, and can radiate radio frequency
energy, and if not installed and used in
accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause unacceptable inter-
ference to radio or television reception, which
can be determined by turning the equipment off
and on, the user is encouraged to try to correct
the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the
equipment and receiver.
- Connect the equipment into an outlet on a
circuit different from that to which the receiver
is connected.
- Consult your dealer or an experienced
radio/TV technician for help.
FCC Warning:
To assure continued FCC compliance, the
user must use a grounded power supply cord
and the provided shielded video interface cable
with bonded ferrite cores. Also, any unauthorized
changes or modications to this monitor would
void the user's authority to operate this device.
The Responsible Party located
within United States
U.S.ELECTRONICS, INC.
Tel:1-888-926-2605
CE Certication
This device complies with the
requirements of the MDD directive
93/42/EEC "Medical Device
Directive".
Warning
- This apparatus must be earthed because of
Class I equipment.
- This apparatus is no patient contact equipment.
- When using at 240 V in United States,
supply must be from center-tapped, 240 V,
single phase circuit.
- Please consult with the dealer from whom you
purchased it about waste disposal.
- This equipment shall not to be used around the
patient vicinity, which is the space with surfaces
likely to be contacted by the patient or an
attendant who can touch the patient.
This encloses a space within the room 1.83 m
(6 feet) beyond the perimeter of the bed in its
intended location, and extending vertically 2.29
m (7-1/ 2 feet) above the oor.
Equipment Classication
- Type of protection against electric shock:
Class II equipment
- Protection against harmful ingress of water :
Ordinary Equipment (IPX0)-No protection.
- Not suitable for use in the presence of a ammable
anesthetics or oxygen.
- Mode of operation: Continuous operation
- 4 -
�
Cautions when setting up
Cautions when using
Follow the instructions below for safety use of the color LCD monitor.
-Read this user’s manual and properly use the unit.
-You must agree that Kodak is not liable for any damage caused by any third party’s or your
negligence of following the instructions of this user’s manual and misuse except those specied
responsibilities for compensation accepted by law.
●Symbols
-This user’s manual contains various symbols to
guide users to properly use the product.
-The contents in each box below express the events
that will occur following neglects of signs and
misuse.
-Conrm the contents shown here and then read
this manual carefully.
●Meaning of symbols
Person could be at risk of severe
injury or death.
Warning
Person or properties could be at risk
of injury or damage.
Caution
expresses DO NOT. expresses MUST DO.
Caution
●Do not put the unit on
unstable places (on a wonky
table and inclined place),
which might cause injuries
arising from its dropping or
falling.
●Do not place the unit where it
is subject to direct sunlight or
near any heating device.
The cabinet and/or components
may be damaged, which may
cause generation of fever and
ignition.
Caution
Warning
●Do not put the unit in such place
where it has bad air circulation,
dust, humidity, oily smoke and
steam.
It may lead to re.
●Do not put any metal materials or
ammable foreign objects into the unit
(from vent holes).
It may lead to electric shock and/or
re.
※In case that any object mentioned
above is placed inside, mmediately
turn off the power, disconnect the
plug from outlet, and contact hops.
●Scratching or hitting with hard objects
may break the unit.
●Do not use the unit turned over on its
back, pushed on its side, or
upside down.
These may lead the fever that
the unit generates to pile up
inside the unit, which may
lead to generation of fever
and ignition. Also, falling may
cause injuries.
●Do not place any container lled with
water or any chemicals near the unit.
In case of containers falling down,
liquid may permeate inside and
insulation failure may occur, which
may lead to electric shock.
※In case of any liquid entering
inside, immediately turn off the
power, disconnect the plug from
outlet, and contact shops.
- 5 -
Abnormal circumstances
Maintenance
Caution
Warning
Warning
Warning
Caution
●Do not put the unit in such place where
it is subject to direct sunlight or near
any heating device.
The cabinet and/or
components may be
damaged, which may cause
generation of fever and
ignition.
●Do not use the attached AC adapter to
other devices (models with attached AC
adapter).
It may lead to generation of fever and/or
re. Also, do not use any other AC
adapter to this unit.
●During a long-hour use, take a break 10 to 15 minutes every one hour for your eyes.
Otherwise, it may cause eyestrain.
●In case of any abnormality such as odor,
sound, and overheat taking place,
immediately turn off the power
and disconnect the plug from
outlet.
Continuance of using the unit
under such condition may lead to
electric shock and/or re. Immediately turn
off the power, disconnect the plug from
outlet, and contact shops.
●In the event of thunder, immediately
turn off the power and disconnect
the plug from outlet.
Lightning strikes may cause
electric shock and/or re.
●In the event of broken panel and leaking liquid crystal, do not inhale,
swallow, or touch the liquid crystal.
It may cause you getting poisoned and/or having a skin irritation. If you put
it in your mouth, immediately gargle with water and go to see a doctor to
get a checkup. In case of taking it on your skin and/or cloth, wipe it off with
alcohol and rinse them.
●Clean inside the monitor once a year.
The dust inside the unit may lead to re.
※Ask shops for adjustments and
inspection.
●Disconnect the plug from outlet when
not using the unit for a prolonged
period.
Disconnect the plug from outlet
when not using for a prolonged
period for such as trip.
●Do not remove the cabinet.
There are high-voltage parts inside
that may lead to electric shock.
※Ask shops for adjustments
and inspection.
●Do not remodel or repair.
It may lead to re, electric shock,
or injuries.
- 6 -
●Even if the unit is properly used, it may have an effect on radio and/or TV reception upon the
condition of electric wave. If it is the case, give caution to the followings.
1) Ensure enough space between the unit and radio and/or TV.
2) Connect the unit and radio and/or TV to separate outlets.
●Color LCD monitor may have tiny spots and unevenness according to the displaying
conditions, but they are not any sign of failure.
●LCD panel is produced with high-denition technology, but there may be some imperfect
displaying pixels (lacking, constant lighting).
●When placing LCD panel near windows or outside for a long period of time, give caution to it;
sunlight may cause damage on the panel.
●Do not give LCD panel a strong push, scratch it, or place any object on it. It may cause LCD
panel failure.
●When using the unit in a cold place, you will see images leave traces or a dark screen, but it is
not a failure. It will go back to the normal state as temperature rises.
●Do not display still pictures for a long period of time, which may cause afterimages.
●The minimum state of the brightness adjustment may make images difcult to see.
●The quality of computer signals may have an effect on the unit’s quality. We recommend you to
select computers with high-quality video signal output.
●Instantaneous voltage change
This unit may have defects upon momentary voltage drops of power supply caused by incidents
such as lightning strikes. For the countermeasure for it, we recommend you to use devices such
as uninterruptive power supply.
Notes
Disposal of the unit
◆Do not dispose of the unit with general wastes.
◆Do not dispose of the unit together with general wastes.
◆The unit contains mercury in its CCFT(Cold cathode uorescence tube). Follow your local regulations
or rules upon disposal of the unit.
Limitation of Liability
●Kodak is not liable for damages arising from re, earthquake, actions taken by any third party, any
other accident, any intended action, negligence, or misuse by user, or use under such abnormal
circumstances.
●Kodak is not liable for incidental damages (including, but not limited to, loss of business
prots, disruption of buisiness, change or loss of saved data) arising from use of this product or inability
to use this product.
●Kodak is not liable for damages arising from use not described in the user's manual.
●Kodak is not liable for damages arising from malfunctions caused by combination of
connecting devices.
●Kodak is not liable for damages (concerning time limit or buisiness, reduction or delay of
prots, information, and other economic hardship) arising from use of software provided by Kodak
for use of this product, even if Kodak has been advised of the possibility of such damages.
- Windows and MS-DOS are registered trademarks or brands of Microsoft Corporation within the United States and in
other countries.
- VESA is a brand of Video Electronics Standard Association.
- DirectColorCal is a registered brand of Eastman Kodak Company.
- The names of companies and products are registered brand names or brand names.
- 7 -
＊We recommend you to keep the packing box for transportation and the like.
＊In case of transporting and packing the unit in the packing box, carefully place it, keeping its
panel from touching any objects.
NOTES
Auxiliaries
Conrm the auxiliaries listed below are included.
□AC adapter 1 □USB cable 1
□Power supply cord (3P wall type) 1 □User’s Manual (this manual) 1
□DVI-DVI cable 1
□Communication cable 1
- 8 -
●Use of a 20.8-inch (53cm) QXGA ultra-high-denition color LCD panel
A large screen size and clear image is obtained by using a 20.8-inch (diagonal 53cm)
QXGA (2048 x 1536 ) ultra-high-denition color LCD panel.
To display the maximum resolution on DV3MC, a graphics card that can display 2048 x 1536
or 1536 x 2048 is necessary.
●High-intensity, high contrast
The 3 million pixels for displaying various medical images can be displayed at "high-resolution,"
"300:1 high contrast" and "wide viewing angle."
Maximum brightness: 160cd/m2
120cd/m2 (when the brightness stabilizing circuit is operating)
Viewing angle: ±85 degrees both vertically and horizontally
●DVI (digital visual interface)
Employing DVI (digital visual interface) has achieved less deterioration of video signal
and high-denition image display, compared to conventional analog interfaces.
●Brightness stability
In order to restrain the brightness drift arising from the LCD backlight, the unit is installed
with our unique automatic brightness stabilizing circuit (λ-Sentinel).
As a result, the brightness drift is held down following introduction of power.
Thus stable brightness is observed over a long period of time.
●Calibration function
With the optional color sensor and DirectColorCal software, luminance and gradation
(gamma curve) of the color LCD monitor can automatically be calibrated.
●Portrait/landscape orientation
The LCD panel can be rotated by 90 degrees from portrait to landscape orientation.
The display switch between portrait and landscape is made by internal hardware rotation function.
●Power management
This unit has loaded the power management system. The power management mode functions
when either horizontal or vertical signals or both disappears, and it reduces power consumption
to less than 10W.
●VESA standard wall/arm mountings
The units is compliant with VESA's 100mm-pitch hanging tools. The tilt stand is detachable;
the unit can be set according to users' environment such as arm mounting.
-Portrait display is available only when a graphics card can display 1536 x 2048.
-When the monitor is used as a suspention type, please use a hanging arm able to support a
monitor weighing 10kg. or more.
●Obtaining standards
The product observes worldwide medical standards such as UL2601-1.
Features
Caution
Note
- 9 -
How to Operate
1. Names and Functions of Each Part
① Power switch
This turns the power of the color LCD monitor ON and OFF.
② Power indicator
Operating Section
No. LED Status Power Status Color LCD Monitor Status
1
2
3
4
OFF
Green lamp
is lit
Orange lamp is lit
OFF
ON
ON
ON
Power is OFF
The brightness stabilizing circuit is ON and
the brightness is stable
The brightness stabilizing circuit is ON and
the brightness is being adjusted
Power saving mode
- 10 -
③ USB upstream port
Connect this port to the upstream connector from the computer. For the connection, use a USB
cable 2 meters or shorter in length.
④ USB downstream port x 2
Connect the ports to USB devices (a MOUSE, etc.) with a maximum current consumption of no
greater than 100mA per port.
Connect the color sensor when you operate color calibration.
⑤ DC power connector (DC IN 12V)
Connect the attached AC power adapter to the +12VDC power source connector.
⑥ VIDEO input connector (SIGNAL)
Connect a signal cable to the graphics board's digital video signal (DVI) connector.
⑦ REMOTE IN connector ⑧ REMOTE OUT connector
Used to control serial communication for such as brightness calibration.
⑨ Photo sensor connector
This connector is not used.
The ③ and ④ USB hubs are bus-powered types. These do not require external power
supply and are for connecting to equipments with little dissipation power like a mouse.
Connection Section
Left side view
Portrait (shorter side at the top)
Caution
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Kodak Monitor Handbücher
