Kodak SA101 Merkblatt
Installation Guidelines for
KODAK SA101 Alarm System
2
CONTENTS
I- Installing the central unit Pages 3 - 4
II- Home page Page 5
III- Central unit set-up Page 6
IV- Installation and settings: Pages 7 - 13
cameras and accessories
V- Using the scenarios Pages 14 - 16
VI- Additional informations Pages 17 - 18
3
I- Installing the central unit
1. Download and install the free KODAK CONNECT application from your mobile
phone.
2. Connect the gateway to your internet modem using the Ethernet cable
provided with your alarm system, then plug the gateway in.
3. In the application, tap “+” to select your preferred gateway.
4
4. The application will automatically detect the device ID number of your
gateway. Please enter the name you want to give to the gateway, then tap
“Next”
5. Enter a password, then tap “Save”
NOTE:
1) The gateway must be always connected to your internet network via the Ethernet
cable.
2) If the application does not detect automatically your gateway, you can use manual
settings by entering the device ID number and its password.
3) The device ID number of the gateway is located at the back of the device, and the
default password is 123456.
5
II-
Home page
1 :
Panic button, in case of emergency
1
: Direct access to your cameras
2 :
Arm/Disarm button
2
: Access to scenarios
3 :
Record button
3
: Access to events
4
: Access to advanced settings
1
2
3
1
2
3
4
6
III- Setting the gateway
On the home page, tap (settings)
The Admin default password is 123456
You will be directed to the following page:
Setting the gateway siren
To add emergency
contacts in case of alarm
Setting the notifications you
want to receive
To select the cameras /
accessories that you want
to enable under various
modes
7
IV- Installation and settings: cameras and accessories
• ADD A CAMERA
In the Home page of your Kodak Connect application, tap
Then tap to add your camera
8
Switch your camera on, then tap “Next” to start the installation
Select your Wi-Fi network (make sure that your network is on
2.4 GHz), then enter the related password and tap “Next”
Wait then for 90 seconds for your camera to re-start
Choose a name for your camera, then enter the password
(default password 123456). Your camera is now set. You can
access it from the home page
9
Camera set-up:
When you are on the Live Video page of your camera, go to
advanced settings (the Admin default password is 123456)
You will be directed to the following page:
To enable
automatic time
adjusting
To link your camera to
Google Drive
(see next page)
To enable/disable the
motion detection
10
Notes:
1) Please make sure that your camera is connected to the same internet network as
your mobile phone. The system can only operate under 2.4 GHz network.
2) If the camera is not detected automatically by the application, you can add it
manually by entering its device ID number, which can be found at the back of the
camera.
3) If you connect the camera via an Ethernet cable, you can switch to wireless network
through the advanced settings menu.
4) If you have already used your camera with the KODAK SECURITY application, make
sure you make a RESET before connecting it to the KODAK CONNECT application.
Google Drive settings for video recording
To set up Google Drive, go to advanced settings, then to “Cloud setting”.
o Create a Google Drive account
If you have not yet created a Cloud Storage account while you were setting your camera, be
aware that you can do it at any time during this process. The assistant will guide you step by
step to create your private cloud by using your personal Google Drive account as a storage
site. The download time to Google Drive will depend on the quality of your internet connection.
The Cloud Storage account differs from your Google Drive account; it is dedicated specifically
to the management of your cameras, whereby each camera is saved on the same Cloud
Storage account, and then linked to your Google Drive account.
Inhaltsverzeichnis
Andere Kodak Sicherheitssystem Handbücher
Beliebte Sicherheitssystem Handbücher anderer Marken
EDM
EDM Solution 6+6 Wireless-AE Bedienungsanleitung
Highway Safety Group
Highway Safety Group EA401 Bedienungsanleitung
Siren
Siren LED GSM Bedienungsanleitung
Detection Systems
Detection Systems 7090i Montageanleitung
Se-Kure Controls
Se-Kure Controls MicroMini SK-4841 Bedienungsanleitung
Siemens
Siemens FDM273 Bedienungsanleitung