Koden CVG-200 Bedienungsanleitung

Declaration of Conformity

(As required by Article 7 (1) of Directive 89/336/ C)

Declares under his sole responsibility that the produced Plotter/Sounder manufactured by

Koden lectronics Co., Ltd.

5278 Uenohara,

Uenohara Citv,

Yamanashi-Ken

409-0112, Japan

Telephone +81 554 20 5865 Telefax +81 554 20 5880

Identified by the type number CVG-200 to which this declaration refers conforms to the

requirements of Directive 89/336/ C amended by 92/31/ C and 93/68/ C and is in

conformity with the MC, Health and Safety standards of

N60945

Signed ……………………………………..

Heinz Hoghoff,

Dated 06 April 2005

Koden lektronik GmbH.

Am Gewerbepark 15

D-64823, Gross–Umstadt

Germany.

Phone +49 6078 2056

Telefax +49 6078 73824

N.B. As this product is for Maritime use compliance with Directive 72/23/ C is not required.

CVG-200 OPERATION MANUAL

Doc No: 0093132802

Amendment History

No. Document No ＆Rev

No. Revised Date Amendments

0 93132802-00 2005/01/24 First issue

1 93132802-01 2005/03/24 Chapter 5 Chapter 6 (93132810→93132802)

2 0093132802-02 2005/12/01 Chapter 6 Annex (It is compatible from Ver2.01.)

3 0093132802-03 2006/08/16 Chapter 2

4 0093132802-04 2006/09/20

C-MAP MAX:Chapter 1, Chapter 2, Chapter 3,Chapter 5

Chapter 6, Chapter 7 , Chapter 9,Annex

5 0093132802-05 2006/10/03 Chapter 6(6.3.2), Annex

6 0093132802-06 2008/08/04 Annex B

7 0093132802-07 2008/09/19 Declaration

8 0093132802-08 2010/03/09 Chapter 5

9 0093132802-09 2011/06/16 Chapter 1, Chapter 2, Chapter 3, Chapter 4

Amendment Policy

When any change is applied in the document, only the document numbers of the relevant sheet(s) and

cover sheet are modified. The rest of the sheets are not changed. The document number is shown in

the footer area, either in the right or left of each sheet.

No part of this publication may be reproduced, transmitted, translated, in any form by any means

without the written permission of Koden Electronics Co. Ltd. The technical descriptions contained in

this publication are subject to change without notice. Koden assumes no responsibility for any errors,

incidentals or consequential damages caused by misinterpretation of the descriptions contained in this

publication.

CVG-200 Preface

0093132802-06 (1)

Getting Started

Using the Main

Text

Please guard against losing or damaging this text.

In the event of reselling or handing over this device to someone else, please be

sure to include this manual to the new owner.

In addition, it is advisable to have this text nearby while this device is in

operation.

Important Safety Items

Symbols used in this manual

The following symbols are used in this manual. You are requested to be fully aware of the

meaning of each symbol before carrying out inspection and maintenance of this equipment.

Warning mark

Caution mark

High Voltage mark

Prohibition mark

Operating this equipment while ignoring this sign may lead to a

malfunctioning of the equipment.

Caution

This sign indicates that a specified action is prohibited. The

prohibited action will be shown in the vicinity of the mark.

Operating this equipment while ignoring this sign may lead to

physical injury or damage to the equipment.

Alarm

Operating this equipment while ignoring this sign may lead to

electrical shock.

Preface CVG-200

(2) 0093132802-06

Types of Operational Warnings

This device aids in navigation. For decision making in sound navigation,

please be sure to use other widely used resources in addition to this device:

land maps, sea maps, GPS devices, landmarks, water depth, obstacles, and

other devices.

This devices uses voltage levels which are potentially life threatening. Even if

the power is shut-off, live electricity may remain within the circuits. Warning

labels and protective covers have been added to prevent carelessly touching

high-voltage circuits. For the sake of safety, switch off the power before

performing any inspection of the inside of this device. Then, please proceed

to properly discharge any remaining voltage from the condenser. Proper

inspection must be carried out by a qualified technician.

This GPS (Global Positioning System) functions using 28 satellites. Should

there be no obstacles, and should the sky be clear, the user should be able to

find his position anywhere in the world. However, this group of satellites are

operated and managed by the US Pentagon, and we have no control over the

quality of reception or the policy of the US government. Without prior notice,

the accuracy of position, bearings, speed measurements may deteriorate, or,

adjustments, testing, and course corrections, etc. may be necessary.

Signals from the satellites may be disrupted at certain times.

Warning

Caution

Warning

CVG-200 Preface

0093132802-06 (3)

Types of Cautions During Maintenance

Be certain to turn off your boat’s power

Carelessly switching on the power during inspection may result in electrical

shock. In order to prevent such accidents, be sure to switch off the power of

this device as well as the power of the boat. Furthermore, a warning sign

saying “In operation” closely placed to the power switch can also help ensure

safety.

Warning of Remaining High Voltage

Regarding transmitting circuits using the condenser, high voltage may remain in

the circuit for a few minutes after switching the power off. When inspecting a

part of the device with this mark, be sure to wait a few minutes after the power

has been switched off. Also, be sure to properly discharge any remaining

voltage.

Dust Caution

Dust can induce injury to the lungs. When cleaning the inside of this device,

be careful not to breathe in dust. Please use a safety mask or other

equipment to ensure your safety.

Countermeasures towards Static Electricity

The flooring of the boat can cause static electricity when in contact with carpet

or synthetic clothing fibers. This static electricity can in turn destroy

electronics. Install proper countermeasures towards static electricity to protect

your equipment.

Warning

Caution

Preface CVG-200

(4) 0093132802-06

How to use this manual

Scope of this manual

This manual contains general information as well as system composition, installation, operation and

maintenance of the CVG-200 Plotter/Sounder

Structure of this manual

This manual is divided into sections according to the contents as outlined below. This allows for the

overview of the entire manual as well accessing detailed information for your specific requirement.

Chapter 1: General Information

-About the GPS

-Applicable Standards

-Software Type Name

-Equipment Configuration

Chapter 2: Equipment Composition

-Standard Equipment List

-Spare Parts List

-Optional Items List

-Available Transducers List

-Transducers

Chapter 3: Specifications

-Specifications

-Serial Data

-Power Requirements

-Environmental Conditions

-External Dimensions and Weight

Chapter 4: Installation

-Installation Consideration

-Unpacking of The System

-Inspection of the equipment

-Proper Location for Setup

-Cable Routing and Connections

-Display Installation

-Internal Connections of The System

-Post-installation Inspections

Chapter 5: Basic Operations

-Name and Function of Parts

-Displaying the Images

-Plotter Screen

-Operation of Sounder Display

Chapter 6: Using the Menu

-Menu Functions

-Sounder Menu

-Plotter Menu

-Setting of other Menus (ETC)

CVG-200 Preface

0093132802-06 (5)

Chapter 7: Trouble Shooting and Maintenance

-Information Required for Service

-Trouble Shooting

Chapter 8: Maintenance

- Periodical Inspection and Cleaning

Chapter 9: Technical Reference

-Details of Input Serial Data Sentence

-Details of Output Serial Data Sentence

-Connecting to An External Sounder

-Connecting to Water Temperature/Speed Sensor

-Serial Data Input/Output

-Data input/output serial line

-Signal Output for External Buzzer

Annex Sheets:

-Menu Tree

-LOLAN C CHAINS

-DECCA CHAINS

Annex B Sheets:

-COLOR PALETTE

CVG-200 Chapter 1

General Information

0093132802-04 Contents

Chapter 1

General Information

Page No.

1.1 About GPS..................................................................................................1-1

1.1.1 GPS Satellite Arrangement...................................................................................1-1

1.1.2 GPS Organization ..............................................................................................1-1

1.1.3 On Proper Use ..................................................................................................1-1

1.2 Outline of The Equipment.........................................................................1-2

1.3 Applicable Standards................................................................................1-2

1.4 Software Type Name..................................................................................1-2

1.5 Equipment Composition...........................................................................1-2

CVG-200 Chapter 1

General Information

0093132802-09 1-1

Chapter 1 General Information

1.1 About GPS

1.1.1 GPS Satellite Arrangement

GPS (Global Positioning System) is a navigation system using 24 satellites (21 plus 3 in service)

orbiting above the earth once every 11 hours 58 minutes at an altitude of about 20,000 km.

1.1.2 GPS Organization

Your position is determined by calculating the distance from more than three satellites to your position.

Your position (latitude, longitude and altitude) is determined at the intersection point of four spheres

formed by four satellites.

Note: The GPS system is based on a geodetic system called the WGS (World Geodetic System). In

a conventional world map, one coordinate system differs from others by region. This causes the

position fix made on the map and GPS measurement to differ to a certain extent.

1.1.3 On Proper Use

In the following circumstances, your GPS receiver takes more time to fix your position:

・When you first turn on the GPS receiver.

・After having the unit turned for a long time, the previously stored orbital data is not suitable for the

current satellite.

・When you turn the power back on after having not used it over a long distance.

The GPS navigation device, within a useful locality, through available data from orbiting satellites, will

record and speed your position data to you. When the GPS receiver is first turned on, it starts to

store the orbital data sent from the satellite. The first data becomes available after about 15 minutes.

After this, the receiver can fix your position within a minute by using the previously stored data.

In the case of abnormal or adverse conditions, or if foreign substance enter the device, turn off the

power immediately, and contact your nearest sales or service store.

Andere Handbücher für CVG-200

Inhaltsverzeichnis

Andere Koden Schiffsausrüstung Handbücher

Koden

Koden CVR-010 Bedienungsanleitung

Koden

Koden CVS-841 Bedienungsanleitung

Koden

Koden CVS-1410B Bedienungsanleitung

Koden

Koden CVS-702D Montageanleitung

Koden

Koden CVS-872D Bedienungsanleitung

Koden

Koden CVS-128 Bedienungsanleitung

Koden

Koden CVS-FX1 Montageanleitung

Koden

Koden CVS-FX1 Bedienungsanleitung

Koden

Koden CVS-FX2BB Montageanleitung

Koden

Koden CVS-833 Bedienungsanleitung

Koden

Koden CVS-128 Bedienungsanleitung

Koden

Koden CVS-126 Bedienungsanleitung

Koden

Koden CVS-126 Bedienungsanleitung

Koden

Koden CVS-FX1 Montageanleitung

Koden

Koden CVS-128 Bedienungsanleitung

Koden

Koden CVS-118Mk II Bedienungsanleitung

Koden

Koden CVS-126 Bedienungsanleitung

Koden

Koden CVS-FX2 Bedienungsanleitung

Koden

Koden CVS-FX2 Bedienungsanleitung

Koden

Koden CVS-875D Bedienungsanleitung

Koden

Koden CVR-010 Bedienungsanleitung

Koden

Koden KDS-8000BB Bedienungsanleitung

Koden

Koden CVS-705D Bedienungsanleitung

Koden

Koden CVS-126 Bedienungsanleitung

Beliebte Schiffsausrüstung Handbücher anderer Marken

Clarion

Clarion CMS2 Reparaturanleitung

EBS

EBS M7000 Bedienungsanleitung

Kongsberg

Kongsberg M3 Bathy Bedienungsanleitung

NPK

NPK SCS-1002 Bedienungsanleitung

Furuno

Furuno FE-800 Bedienungsanleitung

Harken

Harken 1561 Bedienungsanleitung

Simrad

Simrad DD15 Bedienungsanleitung

Notifier

Notifier FS-BSO Bedienungsanleitung

Raymarine

Raymarine ST40 Bedienungsanleitung

E2S

E2S E2XS112UL Bedienungsanleitung

R2Sonic

R2Sonic 2026 Bedienungsanleitung

COBHAM

COBHAM SAILOR 6000 Bedienungsanleitung

Raymarine

Raymarine Maxiview ST80 Benutzerhandbuch

GUIDANCE MARINE

GUIDANCE MARINE 20- Series Montageanleitung

Raymarine

Raymarine ST60 Tridata Benutzerhandbuch

Sonic

Sonic 2024 Bedienungsanleitung

Quicksilver

Quicksilver 88688A25 Handbuch

Furuno

Furuno Navtex NX-700-A Bedienungsanleitung