Kogan SMARTERHOME KARWASHR2SA Bedienungsanleitung

KOGAN SMARTERHOME™ PURIFIER

& HUMIDIFIER AIR WASHER 2S+

WITH H13 FILTER (130 CADR)

KARWASHR2SA

Before using the product, read this user guide carefully and keep it for future reference.

Warning

•To avoid electric shock and fire, do not allow water, liquid, or any flammable

detergent to enter the product.

•Do not spray insecticide, perfume, or other flammable liquids onto or near the

product.

•Before connecting the power supply, ensure that the voltage of the product is

consistent with the local power supply voltage.

•This product cannot replace normal ventilation, daily dust collection or kitchen

exhaust systems.

•Ensure the product is always situated on a flat, even surface when in use.

•Leave at least 30cm of space on the back and sides of the product and at least

50cm of space above the product when using.

•Ensure both the filter and its cover are properly installed before using.

•Never insert anything into the air inlet or outlet to avoid damage to the product or

physical injury.

•Add some water to the water tank after removing the humidification module. The

water surface should never exceed the overflow holes on both sides.

•Do not add essential oils to the water tank.

SAFETY & WARNINGS

Components

Control Panel

OVERVIEW

Water tank cover

Wet curtain

Water tank

Filter

Base

Control panel

Light ring

Air outlet

Air inlet

Power button

Timer button

Wind Speed button

Light Control button

Filter

•Remove the packaging from the filter before using for the first time.

•Ensure the machine is unplugged before removing or installing the filter.

•When the light ring continuously flashes in red, the filter should be replaced.

•Please wipe the dust on the filter regularly, do not wash or use it repeatedly.

•Please use the filter specially designed for this product.

Steps of Installing Filter

Unplug the power socket of the machine before replacing or installing the filter.

Step 1

Invert the machine and rotate the base along the direction marked “OPEN”.

INSTALLATION

Step 2

Take out the filter from the machine.

Step 3

Remove the packaging of the filter.

Packaging

Step 4

Install the filter into the machine.

Step 5

Install the base, then rotate and tighten the base along the direction marked “CLOSE”.

Note: Press and hold the power button for 7s to reset after installing a new filter. When using

the device for the first time, remove the packing of the filter before using but do not reset the

device.

Install App

Download the “Kogan SmarterHome” app from the Play Store (Android) or App Store (iOS).

If you do not have a Kogan SmarterHome™ account, register or sign in with a verification

code sent by SMS.

To register:

1. Tap to enter registration page.

2. The system automatically recognises your country/area. You can also select your

country code manually. Enter your email address and tap ‘Next.’

3. Alternatively, you can select ‘Register by mobile number’ and enter the verification

code sent to you by SMS.

4. Create a profile on the next page to define your location and room.

CONNECT TO SMARTERHOME™ APP

Set device in pairing mode

When the device is first turned on, it may automatically enter pairing mode (the Wi-Fi

indicator light may be rapidly flashing).

If not automatically in pairing mode when powered on, you can manually set the device in

pairing mode by pressing and holding the Timer button for 5+ seconds until a beep is heard

and the indicator light begins rapidly flashing.

Add device through network

5. Once registered, tap “+” in the upper right corner of the app’s home page to add a

new device through the network.

6. Select the product type from the list of options in the app (Air Treatment > Air

Purifiers).

7. Ensure that the device is in pairing mode, with the example of indicator, and tap

“Confirm light is rapidly flashing”.

8. Upon successfully confirming pairing mode, enter your Wi-Fi details. It is important

that your SmarterHome™ device and the app are connected to the same Wi-Fi

network during setup.

9. The device will commence the pairing process and connect to the app. Ensure your

Wi-Fi router, mobile phone, and the SmarterHome™ device are kept close until

connection is complete.

10. After successfully being added, you will have the option to rename the device and

assign it to a location. It will now be listed on the app’s home page. Tap the device

listing to enter its control page.

Notes:

•The device and the app have to use the same Wi-Fi network.

•The device is only compatible with 2.4Ghz networks.

Inhaltsverzeichnis

Andere Kogan Luftreiniger Handbücher

Kogan

Kogan SMARTERHOME KASMAPF2PCA Bedienungsanleitung

Kogan

Kogan SMARTERHOME KABLFAN1CSA Bedienungsanleitung

Kogan

Kogan SMARTERHOME 5S Bedienungsanleitung

Kogan

Kogan SMARTERHOME KABLFAN2CSA Bedienungsanleitung

Kogan

Kogan SMARTERHOME KAIRPRFR4SA Bedienungsanleitung

Kogan

Kogan SmarterHome 1S Bedienungsanleitung

Kogan

Kogan Kapuriohepa Bedienungsanleitung

Kogan

Kogan SMARTERHOME SECURITY CAMERA DOORBELL 3 PRO Bedienungsanleitung

Beliebte Luftreiniger Handbücher anderer Marken

IKEA

IKEA UPPÅTVIND Bedienungsanleitung

Nash

Nash AP-1 PureSmart Bedienungsanleitung

LG PH-U450 Series Bedienungsanleitung

DeLonghi

DeLonghi DDSX 220WFA Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric MA-E85R-E Bedienungsanleitung

Sharp

Sharp FU-40SE Bedienungsanleitung

Philips

Philips AC2721 Bedienungsanleitung

TruSens

TruSens Z-2000 Bedienungsanleitung

Motorola

Motorola MBP87SN Bedienungsanleitung

Beko

Beko ATP 7100I Bedienungsanleitung

Carrier

Carrier INFINITY 1620 Bedienungsanleitung

AtmosAir

AtmosAir P2002 Bedienungsanleitung

Winix

Winix NK300 Bedienungsanleitung

Friedrich

Friedrich C-90A Bedienungs- und Montageanleitung

Surgically Clean Air

Surgically Clean Air JADE2.0 Bedienungsanleitung

Base aire

Base aire 555 Pro Bedienungsanleitung

Champion

Champion CP25 Bedienungsanleitung

vollara

vollara Air & Surface Pro+ Bedienungsanleitung