Getting Started
Step 1: Install the batteries. Once the batteries are correctly installed, the po er indicator ill light up.
Step : Press the keyboard's 'connect' button until the LED of the 'Num Lock' key begins to flash. This
ill indicate that the keyboard is ready to be connected to a device.
Step 3: Turn on your device.
Step 4: Locate your Bluetooth settings ithin the Control Panel of your operating system. Enable
Bluetooth connection. Your operating system ill automatically search for a Bluetooth-enabled device.
Step 5: The ireless keyboard ill be detected as a Bluetooth-enabled device. Follo the on-screen
instructions and click on the relevant buttons to install the keyboard.
Step 6: Enter/set a pass ord hen prompted.
Step 7: If the installation of the keyboard has been successful, the keyboard's po er indicator light ill
remain illuminated until the device is s itched off.
NOTE:
- If your device is ithout Bluetooth functionality, an extra USB Bluetooth dongle should be used to
connect the Bluetooth Keyboard.
- iOS4.0 is a minimum requirement for the ireless keyboard to function. Please research device
compatibility before attempting to connect to the keyboard.
- There are three LED indicators for this keyboard. Bluetooth and the 'Num Lock' key share an LED,
hereas the 'lo po er' indicator and the 'Caps Lock' key share a seperate LED. The third LED is
reserved for the keyboard's 'Scroll Lock' function.
Energy-saving Sleep Mode
The keyboard ill engage sleep mode hen it is inactive for 30 seconds. The keyboard po er light ill
go off, indicating that sleep mode has been initiated. To reactivate the keyboard from sleep mode, just
press and key and ait 3 seconds, the keyboard ill come back on.
