Kogan NBLTSPBTMSA Bedienungsanleitung

Inhaltsverzeichnis

Andere Kogan Beleuchtungsausrüstung Handbücher

Kogan

Kogan KAPKVIDLBKA Bedienungsanleitung

Kogan

Kogan KARILI12LEA Bedienungsanleitung

Kogan

Kogan SMARTERHOME KA52CWCLSWA Bedienungsanleitung

Kogan

Kogan NBOTLTUBBPA Bedienungsanleitung

Kogan

Kogan NBLTFSLM02A Bedienungsanleitung

Kogan

Kogan SMARTERHOME KA2MWPLTSPA Bedienungsanleitung

Kogan

Kogan KARILI19LEA Bedienungsanleitung

Kogan

Kogan SMARTERHOME KAABLGTBARC Bedienungsanleitung

Kogan

Kogan SMARTERHOME KATVLTHDMIA Bedienungsanleitung

Kogan

Kogan SMARTERHOME KBE27RGBC1A Bedienungsanleitung

Kogan

Kogan KAMODLGT10A Bedienungsanleitung

Kogan

Kogan SMARTERHOME KAABLGTBARB Bedienungsanleitung

Kogan

Kogan NBOLXMASSLA Bedienungsanleitung

Kogan

Kogan NBOTLTSLP2A Bedienungsanleitung

Kogan

Kogan SMARTERHOME KA52CWCLRWA Bedienungsanleitung

Kogan

Kogan Yeelight sunflower Installationsanleitung

Kogan

Kogan KARILI12LEB Bedienungsanleitung

Kogan

Kogan KARILI10LEA Bedienungsanleitung

Kogan

Kogan NBLTSLWMMSA Bedienungsanleitung

Kogan

Kogan KARILI10LEB Bedienungsanleitung

Beliebte Beleuchtungsausrüstung Handbücher anderer Marken

Brizo

Brizo 8SP-MU-4 Bedienungsanleitung

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Bedienungsanleitung

IKEA

IKEA BJÖRKSPIREA Bedienungsanleitung

Laserworld

Laserworld Evolution Series ES-400RGB Bedienungsanleitung

EuroLite

EuroLite LED B-40 Bedienungsanleitung

Qazqa

Qazqa Suplux SL 3 Black 103062 Bedienungsanleitung

Commercial Electric

Commercial Electric 54568141 Bedienungsanleitung

CREE LIGHTING

CREE LIGHTING 304 Series Bedienungsanleitung

Goobay

Goobay 49867 Bedienungsanleitung

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Bedienungsanleitung

Alkalite

Alkalite Krypton KT-81 Bedienungsanleitung

Clas Ohlson

Clas Ohlson GU10 Bedienungsanleitung

DTS

DTS DELTA 10 F Bedienungsanleitung

ring

ring Solar Steplight Bedienungsanleitung

One Stop Gardens

One Stop Gardens 57696 Montageanleitung

SIREM

SIREM Swimeo A2 Bedienungsanleitung

Silvair

Silvair MESH-CEDRP Bedienungsanleitung

S&P

S&P PCRL80 Bedienungsanleitung

BATTERY POWERED WALL MOUNTED

MOTION SENSOR LED LIGHT

NBLTSPBTMSA

•Do not install the light close to people or cars. Keep out of reach of children.

•Do not install the unit close to flammable items.

•Do not stare directly into the light.

•When changing batteries, use only new 1.5V D-cell batteries.

Important information

The light is IP44 rated, meaning it is fully resistant to water splashes from any direction.

However, if the light is completely exposed to the elements and poor weather, some

penetration may be possible. If using outdoors, it is advised that you install the light in a

location with some protection, example an overhang of a roof, porch or garage.

1

Light and motion sensors

2

LED lights

3

Fixed base

4

Elevation control knob

5

Rotation control knob

SAFETY & WARNINGS

OVERVIEW

The wireless light is a powerful outdoor light with a durable ABS casing. The quadruple LED

display generates an impressive 600 lumens (8W) of bright white light, activated by a built-

in motion sensor.

This battery powered light requires no wiring, making for a quick and easy installation. The

body can also be rotated a full 360° to illuminate at your desired angle. Each activation lasts

30 seconds and a built-in light sensor prevents activation during daylight, conserving your

battery power.

Changing the batteries

1. Remove the front cover of the light by unscrewing in anti-clockwise direction (Figure

1), revealing the battery holder. Separate the battery holder by squeezing the two

tabs on the side and pulling (Figure 6).

2. Insert 4 x D-cell batteries into the holder (Figure 7), ensuring the correct polarity.

3. Reattach the battery holder by aligning the grooves on the side and clicking the

tabs into the inside of the holder (Figure 8). Screw the light back onto the holder

(Figure 1).

Figure 6

Figure 7

Figure 8

INSTALLATION

Note:

You do not have to remove the full fixture from the wall to change the batteries.

Mounting the light

1. The light requires 4 x D-cell batteries to be installed before use. Remove the cover

and install the batteries, being careful to install them in the correct polarity.

2. Reattach the front cover by aligning the grooves and screwing in clockwise

direction, as far as it goes. Make sure the arrow is pointing at the lock symbol to

ensure the waterproof seal is tight.

3. To wall mount your light, first remove the mounting base by turning the thumb

screw anti-clockwise (Figure 2).

4. Utilise the three holes to secure the mounting base to your desired wall, using the

screws provided (Figure 3). For best results and depending on your installation

location, consider drilling three pilot holes and using the wall plugs provided.

5. Insert the light unit back into the mounting base (Figure 4). You can now rotate the

light to a full 360° to achieve the desired angle, before tightening the thumb screw

in clockwise direction.

6. You can also pivot the light up and down to your desired angle by loosening the

upper thumb screw in anti-clockwise direction (Figure 5). Once the angle is set,

tighten the thumbscrew in clockwise direction.

Figure 1

Figure 2

Figure 3

Figure 4

Figure 5

•1 X Battery-Powered LED Sensor Light

•3 X Screws

•3 X Wall Plugs

IN THE BOX

NOTES

Need more information?

We hope that this user guide has given you

the assistance needed for a simple set-up.

For the most up-to-date guide for your product,

as well as any additional assistance you may require,

head online to help.kogan.com