USING YOUR MP3 PLAYER
First, locate the On/Off switch on the side of the device. The M 3 player will power on. Similarly, to turn the device
off, you may toggle the switch. You will require a set of earphones to use the device, to be connected with the jack
located just above the On/Off switch.
The front of the device focuses on the main operation of the M 3 player. To play a file, press the main button - i.e.
the lay/ ause ( ||) button located in the centre of the device. ressing the button again during a track will pause and▶
holding down the button will turn off the device. To toggle between songs press between the Next Track ( |) and ▶▶
revious Track (| ) buttons. To scan/search either backward or forward through songs, you can hold down these ◀◀
buttons respectively.
The remaining buttons, marked (+) and (-) , control the volume of the device. You can hold down each button to
increase/decrease volume quickly.
Music will play in alphabetical order of the filenames. If you have stored your music in sub-directories, then once
all of the tracks in one directory have played, the next directory alphabetically will play.
CHARGING YOUR MP3 PLAYER
The M 3 player runs on an internal lithium battery which will automatically charge when connected via USB.
WARNINGS / DISCLAIMERS
- Avoid using your M 3 player at an extreme volume. Experts advise against continuous loud and extended use of
such devices.
- Don’t drown out the world with your M 3 player: be aware of your surroundings and be careful!
- Do not use headphones/earphones while driving, cycling or operating any motorized vehicle.
- Do not expose the device to extreme moisture or sunlight. It will affect normal operation and, in some extreme
cases, prove dangerous to the user.
- Do not disassemble.
- If you believe the player has malfunctioned or requires repair, please refrain from attempting to repair it yourself.
Refer all servicing matters to qualified personnel, or contact your relevant customer service centre.
