Kogan NC-700 Bedienungsanleitung

NC-700 WIRELESS ACTIVE NOISE

CANCELLING HEADPHONES

KAANCHP700A

1 Volume+/Next Track Press for volume up. Press and hold to skip to next track.

2 Multifunction Button

Power On/Off: Press and hold for 2 seconds to power on,

press and hold for 4 seconds to power off. Once powered

on, pairing mode begins automatically after 10 seconds.

Phone Call Control: Press to answer/hang up. Press and

hold to refuse. Press two times to redial last outbound

phone number. Double click to start Siri.

3 Volume-/Previous Track Press to volume down/press and hold to play previous

track.

4 Type-C USB Insert the charging cable; the indicator will illuminate red

and will turn blue as the headphones charge. Do not use

the headphones whilst charging.

5 Mic Microphone for calling.

6 Active Noise

Cancellation Control Press and hold 2 seconds to turn the ANC function

on/off.

7 3.5mm Earphone Jack When plugged in, Bluetooth turns off automatically and

microphone and battery functions are disabled.

OVERVIEW

Connection

1. Press and hold the multifunction button for 2 seconds until the headphones power

on; they will enter pairing mode automatically after 10 seconds. The LED indicator

flashes blue and red alternately. The headphones will power off after 5 minutes if

no Bluetooth device is connected.

2. Activate Bluetooth on the audio device and set it to search for new devices.

iPhone Settings > Bluetooth > On

Android Settings > Bluetooth: On > Scan for devices

3. Select “M6” If necessary, enter four zeros (0000) for the passcode and accept the

connection. Once successfully paired, the headphone LED indicator flashes blue.

Dual device connection

The headphones can be paired with two devices simultaneously. After connecting the first

audio device, turn off the headphones and Bluetooth on the device. Restart the

headphones and pair with the second device and maintain the connection. Finally, open

Bluetooth on Phone A and select “M6” in the menu.

Wired connection

Use the included audio cable to connect. Bluetooth turns off automatically and microphone

and battery functions are disabled when using a wired connection

INSTRUCTIONS

Note:

Menus may vary by device

Note:

The headphones can only play music from one device, even if two devices are

successfully connected at the same time.

Active Noise Cancellation (ANC)

 Press and hold the ANC button for 2 seconds to activate the active noise

cancelling function. The LED will illuminate in green.

 Press and hold for 2 seconds to turn off the ANC function and LED.

Charging

Plug the Type-C USB cable into the headphone charging port and connect the other side

with a USB wall charging adapter or computer. The LED indicator turns red while charging

and turns blue when fully charged. The headphones will alert the user every 15 minutes

when the battery power is below 10%.

Maintenance

 Do not use non-original accessories to avoid performance degradation or electrical

short circuiting.

 Do not attempt to disassemble or repair the device.

 Keep the headphones away from dusty or humid environments.

 Do not allow children less than 3 years of age to play with or use the device.

 Do not place the product in an overheated or super-cooled environment.

 Clean the headphones with a clean, soft, and dry cloth.

 Place the headphones in the original package, or in a secure location when not in

use.

Battery maintenance

 Do not attempt to remove or replace the battery. Contact Kogan.com if battery

maintenance is required.

 The charging temperature of the battery is between 10 and 45°C.

 Charge the headphones at least once a month if not in use for an extended period.

 Battery usage time and standby time are related to usage conditions and are

provided only for reference.

CLEANING & CARE

Notes

 Most Bluetooth devices will automatically save the “M6” device information after

the first-time connection. If there are issues reconnecting, remove “M6” from the

paired device list, then search for and reconnect to M6 again.

 When the headphones cannot be powered on, the battery will likely be short of

charge. Charge the headphones to continue use.

 Ensure that the headphones are not used at an excessive volume for an extended

period to avoid hearing damage.

 Do not attempt to disassemble or repair the headphones. Contact Kogan.com for

any maintenance requirements.

 Do not place strong pressure or heavy objects on the product.

Tips

 Active Noise Cancelling Technology can effectively reduce background noise in a

busy environment, such as traffic or heavy vehicle sounds (low-frequency waves,

150-450Hz).

 Human voice (high-frequency waves) and part of the medium frequency band

cannot be eliminated.

Bluetooth version V5.0 Talking time 50H

Speaker 32Ω 40mm

20-20KHz Music playback time 50H

Standby time 90 days ANC playback time 25H

Frequency 2400MHz-2480MHz Charge current <1A

Microphone Sensitivity: -42 ±3dB

Frequency: 100-10KHz Charge voltage 5V

ANC function Yes Charging time 2-3H

Protocol supported

HSP HFP

A2DP AVRCP Bluetooth distance 10m

Battery capacity 1050mAh

SPECIFICATION

Problem Remedy

The indicator blinks red

quickly or continuously  Battery is low – charge the headphones as soon

as possible.

Headphones will not

power on  Ensure that the battery is charged.

No indicator when

charging

 There may be no indication when charging for the

first few minutes. If the battery is completely

exhausted or charged for the first time after not

being used for a long period, the indicator glows

red to indicate the charging state after short time.

No audio during

Bluetooth connection

 Ensure the headphones are switched on.

 Ensure the music sound output on the device is set

to the headphones (M6).

 Ensure the Bluetooth headphones and the audio

device are paired and connected successfully.

 Ensure the distance between the headphones and

audio device is less than 10 meters/32.8ft.

 Ensure the audio device is not connected to other

Bluetooth headphones or speakers.

No audio during wired

connection

 Ensure the correct 3.5mm audio cable is used and

connected securely. Note that the headphone

buttons and microphone do not work when using a

wired connection.

 Make sure the audio device is in normal working

condition and without damage.

Bluetooth connection is

not successful

 Ensure both the headphone and audio device’s

Bluetooth connections are open.

 Ensure the headphone enters Bluetooth pairing

mode (LED indicator blinks blue)

 Try to ignore the previously connected Bluetooth

devices and empty the Bluetooth device list.

Search for the headphones again.

TROUBLESHOOTING

Need more information?

We hope that this user guide has given you

the assistance needed for a simple set-up.

For the most up-to-date guide for your product,

as well as any additional assistance you may require,

head online to help.kogan.com

Inhaltsverzeichnis

Andere Kogan Kabellose Kopfhörer Handbücher

Kogan

Kogan KATWSIPX6HA Bedienungsanleitung

Beliebte Kabellose Kopfhörer Handbücher anderer Marken

Audity

Audity Infinite Bedienungsanleitung

Bowers & Wilkins

Bowers & Wilkins PI4 Bedienungsanleitung

Niceboy

Niceboy Hive Sport 2 Bedienungsanleitung

Aiwa

Aiwa HST-250BT Bedienungsanleitung

Sennheiser

Sennheiser TR 185 Bedienungsanleitung

JBL

JBL DUET Arc Bedienungsanleitung

UNDER ARMOR

UNDER ARMOR UA STREAK Bedienungsanleitung

JLab Audio

JLab Audio FLEX Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen Beoplay 500 Bedienungsanleitung

Krüger & Matz

Krüger & Matz Play Bedienungsanleitung

Mixx

Mixx StreamQ C1 Bedienungsanleitung

Srhythm

Srhythm NiceComfort 75 Bedienungsanleitung

MOB

MOB MO6249 Bedienungsanleitung

Skullcandy

Skullcandy Uproar Bedienungsanleitung

JBL

JBL Everest 310 Bedienungsanleitung

Pioneer

Pioneer SE-E8TW Bedienungsanleitung

Harman

Harman JBL TUNE 500BT Bedienungsanleitung

JVC

JVC HA-Z77T Benutzerhandbuch