Kohler K-12345M Montageanleitung
Homeowners Guide
Vibracoustic Bath with Heated Surface
Mproduct numbers are for Mexico (i.e. K-12345M)
Los números de productos seguidos de Mcorresponden a México
(Ej. K-12345M)
Français, page ″Français-1″
Español, página ″Español-1″
1212240-5-B
IMPORTANT INSTRUCTIONS
WARNING: When using electrical products, basic precautions should always be followed,
including the following:
WARNING: Risk of electric shock. Connect only to a circuit protected by a Ground-Fault
Circuit-Interrupter (GFCI)*. Grounding is required. The unit should be installed and grounded by a
qualified service representative.
WARNING: Risk of electric shock. A qualified electrician should route all electrical wiring.
WARNING: Risk of electric shock. Disconnect power before servicing.
WARNING: Risk of electric shock. Do not operate electrical powered auxiliary devices near water.
WARNING: Risk of property damage. Building materials and wiring should be routed away from
the heat-producing components of the bath.
WARNING: Risk of injury or property damage. Please read all instructions thoroughly before
beginning installation.
NOTICE: Follow all plumbing, electrical, and building codes.
*Outside North America, this device may be known as a Residual Current Device (RCD).
Table of Contents
IMPORTANT INSTRUCTIONS ....................................................... 2
Product Identification .............................................................. 2
Specifications ................................................................... 2
Your Vibracoustic Bath ............................................................. 5
User Interface Icons ............................................................... 5
Operating Your Bath ............................................................... 6
Setting Menu .................................................................... 7
Experiences ..................................................................... 8
Chromatherapy (If Equipped) ........................................................ 9
Heated Surface ................................................................. 10
Auxiliary Sound ................................................................. 11
Adjusting Resonance ............................................................. 12
Components ................................................................... 13
Troubleshooting ................................................................. 13
Care and Cleaning ............................................................... 17
Warranty ...................................................................... 17
Warranty ...................................................................... 17
Product Identification
Model # K-_______________________
Please record the model number, copied from the label on the box.
Specifications
User Interface
Ambient Temperature Max 125°F (51.5°C)
Maximum Relative Humidity 100% condensing (External surface only)
Interface Cable Length 25’ (7.6 m)
Control Amplifier
Ambient Temperature Greater than 34°F (1°C), Max 104°F (40°C)
1212240-5-B 2 Kohler Co.
Specifications (cont.)
Maximum Relative Humidity 95% non-condensing
Transducer Cable Length 25’ (7.6 m)
Chromatherapy Cable Length 25’ (7.6 m)
Heated Surface Control Cable Length 25’ (7.6 m)
Electrical Service 120 V, 15 A, 60 Hz
Kohler Co. 3 1212240-5-B
Your Vibracoustic Bath
Your vibracoustic bath is designed to provide a relaxing resonating surround sound experience. The bath is
equipped with the following components:
Bath – Allows the bather to relax in comfort while enjoying the vibracoustic experience.
User Interface – Provides convenient control of the unit features, allowing you to select experiences,
regulate resonance intensity, adjust heated surface temperature, and turn the unit ON or OFF. The
interface also allows you to adjust chromatherapy lighting (if equipped) and select an auxiliary
music source (if connected).
Chromatherapy Lights (if equipped) – Add ambience to your bath with a continuous cycle through
eight colors, or you can set the lighting to a specific color.
Heated Surface – Provides soothing warmth to your back, shoulders, and neck with three
temperature settings.
Transducers – Components through which the vibracoustic pulses are transferred to the bath. When
the bath is filled with water, two transducers are positioned above the waterline, and four are
located below the waterline.
Control Amplifier – Provides power to the transducers and chromatherapy lighting (if equipped) to
create soothing or exhilarating vibracoustic experiences. The control also contains a port to connect
an optional auxiliary music source.
Your bath offers several distinct vibracoustic experiences:
″Awakening,″″Solitude,″″Transcendence,″″Letting Go,″″Toms,″and ″Up Down″– six custom
experiences combining sound and vibrations designed to relax or invigorate your mind and body.
The sound resonance, lighting color, and lumbar heat can be adjusted for each experience as desired.
Refer to the ″Adjusting Resonance,″″Chromatherapy,″and ″Heated Surface″sections.
Transducer
User Interface
Control
Amplifier
Chromatherapy Light
(If Equipped)
Heated Surface
1212240-5-B 4 Kohler Co.
User Interface Icons
[Home] Icon – The main menu that displays when the user interface is powered ON.
[Setting] Icon – Allows access to menus for brightness, language and reset.
[Experience] Icon – Combination of sound vibrations and original compositions designed to relax
your mind and body.
[Chromatherapy] Icon (equipped models only) – Turns chromatherapy lights in the bath ON or
OFF, and allows adjustment of color.
[Heated Surface] Icon – Turns heated lumbar support ON or OFF, and controls temperature settings
(low, medium, and high).
[Intensity] Icon – Enables adjustment of above water and below water sound resonance for all
experiences.
[Aux] Icon – Allows for the selection of music from an external audio device connected via the
“Line In” jack on the control amplifier.
[Back Arrow] Icon – Allows navigation back to the previous screen.
Minus [-] Icon – Decreases resonance intensity, heated surface temperature, or interface screen
brightness.
Plus [+] Icon – Increases resonance intensity, heated surface temperature, or interface screen
brightness.
[Mute] Icon – Turns sound resonance OFF or ON.
[Music] Icon – Turns auxiliary sound ON or OFF.
[Power OFF] Icon – Turns the user interface OFF.
Music
Mute
PlusMinus
Home Setting Experience Chromatherapy Intensity Aux
Power OFF
Back Arrow
Heated
Surface
Kohler Co. 5 1212240-5-B
Operating Your Bath
Fill the Bath
To begin using your bath, close the drain, then fill the bath with water.
Using your hand, test the water temperature for comfort and safety. Carefully enter the bath.
Turn On the Interface
NOTE: User Interface “Sleep” Mode – To enhance your bathing experience, the interface is programmed
to darken after two minutes of inactivity. When in sleep mode, the screen will be blank. To resume normal
operation, touch the interface screen.
NOTE: If the interface is not functioning properly, consult the ″Troubleshooting″section of this guide
before calling a qualified service representative.
Touch the screen to turn on the interface. The KOHLER logo will briefly fade in and out, then the
home page will appear.
Navigating the Touch Screen
NOTE: All menu icons displayed on the interface touch screen are enclosed in brackets.
To select a menu option, touch the desired icon.
The brackets of the selected icon will illuminate when the icon is touched, then the screen will
change to the selected menu option.
Home Page
The home page displays the [VibrAcoustic] icon. The left side of the screen displays the [Setting]
icon.
Baths with chromatherapy (shown): Provide options on the right side of the screen for:
[Chromatherapy], [Heated Surface], [Aux], and [Power OFF].
Baths without chromatherapy: Provide options on the right side of the screen for: [Heated Surface],
[Aux] and [Power OFF].
Home Page
Aux
Power OFF
Chromatherapy
(If Equipped)
Heated Surface
1212240-5-B 6 Kohler Co.
Setting Menu
From the home page, touch the [Setting] icon to access the setting screen.
The [Setting] menu contains three options: [Brightness], [Language], and [Reset].
Screen Brightness
The [Brightness] option controls the intensity of the interface screen.
Touch the minus [-] icon to decrease brightness, or the plus [+] icon to increase brightness.
To return to the [Setting] menu, touch the [Back Arrow] icon on the left side of the screen.
To return to the home page, touch the [Home] icon.
Language
The [Language] menu provides three options: [English], [Francais], or [Espanõl].
Touch the desired language. The chosen language will illuminate, and any screens accessed from
that point forward will display the chosen language.
To return to the [Setting] menu, touch the [Back Arrow] icon on the left side of the screen.
To return to the home page, touch the [Home] icon.
Reset
The [Reset] option is available to reset the system to factory settings if the user interface is not
functioning properly.
NOTE: To reset the control amplifier and maintain user interface custom settings, unplug the amplifier
power supply, wait 30 seconds, then plug back in.
NOTE: Resetting the system will return your interface to the original factory default settings.
The reset option resets the user interface as well as the control amplifier.
To reset the system, touch the [Reset] option. After several seconds, the system will reboot and the
user interface will return to the home page.
Reset
Home
reset
language
brightness
brightness language
setting Chromatherapy
(If Equipped)
Aux
Heated Surface
Kohler Co. 7 1212240-5-B
Experiences
NOTE: Experience Duration – The unit is designed to run continuously for 2 hours and then shuts down
whether it is playing an experience or auxiliary sound. Within this 2 hours, if the user touches the
interface screen, the 2-hour timer resets and starts again.
Turn an Experience ON
From the home page, touch the large [VibrAcoustic] icon to access the various experience options.
The screen will display an experience icon enclosed in brackets.
Touch the icon to begin the experience. The brackets will illuminate while the experience is playing.
The experience will play for 2 hours unless the user touches the screen to extend the timer or turns
the power OFF.
Select an Experience
The experiences can be changed by touching the arrows to the right or left of the icon. A different
experience can be selected while an experience is currently playing.
The sound resonance and heated surface temperature can be adjusted for each experience as
desired. Refer to the ″Adjusting Resonance″and ″Heated Surface″sections.
If equipped, the light color can also be adjusted for each experience. Refer to the ″Chromatherapy″
section.
Turn the Experience OFF
Touch the icon to turn OFF the experience.
NOTE: Turning on auxiliary sound will stop any experience that is currently playing. Refer to the
″Auxiliary Sound″section.
Chromatherapy
(If Equipped)
Home
Home Page
Aux
experiences
Heated Surface
1212240-5-B 8 Kohler Co.
Chromatherapy (If Equipped)
If your vibracoustic bath is equipped with chromatherapy lights, the user interface home page will display a
[Chromatherapy] icon in the top right corner of the screen.
Three chromatherapy options are available: continuous cycle through eight light colors, pause on a selected
light color, and turn OFF chromatherapy lights. To access these options, touch the [Chromatherapy] icon until
the desired setting is reached.
Turn Chromatherapy ON
NOTE: The default chromatherapy setting is a continuous cycle through eight colors of light.
Touch the [Chromatherapy] icon located at the top right of the interface screen to turn the
chromatherapy lights ON. The brackets will illuminate, and a dotted arrow will appear inside the
icon to indicate that the lights are cycling through all colors.
The chromatherapy lights will continuously cycle through eight colors. One full cycle takes
approximately 1 minute.
Pause Chromatherapy Color Cycling
The chromatherapy lights can be set to a specific color.
Touch the [Chromatherapy] icon to pause the chromatherapy cycle. The dotted arrow will disappear
to indicate that the lights are paused on the selected color.
During the PAUSE mode, the screen will display right and left arrows.
Touch the right or left arrow to toggle through the desired chromatherapy light color.
Turn Chromatherapy OFF
Touch the illuminated [Chromatherapy] icon to turn the chromatherapy lights OFF. The icon and
brackets will no longer be illuminated and all arrows will disappear.
Aux
Home
Color Cycling ON Pause Color Chromatherapy OFF
chromatherapy
chromatherapy chromatherapy chromatherapy
ChromatherapyExperience
Heated Surface
Kohler Co. 9 1212240-5-B
Heated Surface
NOTICE: The heated surface will remain on until it is manually turned OFF by touching the illuminated
[Heated Surface] icon.
Turn Heated Surface ON
NOTE: The heater will turn on at low heat or the last selected temperature setting.
To turn lumbar heat ON, touch the [Heated Surface] icon located on the right side of the interface
screen. The icon and brackets will illuminate in the center of the screen.
Adjust Temperature Setting
NOTE: After 60 minutes of inactivity, the heater will automatically reset to low heat if the temperature
was set to medium or high.
The [Heated Surface] icon consists of three individual flames. Illumination of one or more flames
indicates which temperature setting is activated.
Touch the minus [-] icon to decrease temperature, or the plus [+] icon to increase temperature. The
individual flames will illuminate or darken to signify the selected temperature setting.
Low heat: bottom flame is illuminated.
Medium heat: bottom and middle flame are illuminated.
High heat: all three flames are illuminated.
Turn Heated Surface OFF
Touch the illuminated [Heated Surface] icon to turn the lumbar heat OFF. The icon and brackets will
no longer be illuminated and the minus [-] and plus [+] icons will disappear.
Aux
Home
Medium Heat High Heat Heat OFF
heated surface
heated surface heated surface heated surface
Experience
Low Heat
Chromatherapy
(If Equipped)
Heated Surface
1212240-5-B 10 Kohler Co.
Inhaltsverzeichnis
Sprachen:
Andere Kohler Badewanne Handbücher
Kohler
Kohler K-941 Montageanleitung
Kohler
Kohler K-837 Kurzanleitung
Kohler
Kohler Mira Flight Freestanding Bath Bedienungsanleitung
Kohler
Kohler Jacob Delafon E6D034-00 Bedienungsanleitung
Kohler
Kohler K-1913P-L Kurzanleitung
Kohler
Kohler VOLUTE K-20610T Bedienungsanleitung
Kohler
Kohler Mariposa K-1257-LA-96 Montageanleitung
Kohler
Kohler K-1226-CD Kurzanleitung
Kohler
Kohler K-1158 Montageanleitung
Kohler
Kohler K-1375 Kurzanleitung
Kohler
Kohler Ceric K-8335-0 Bedienungsanleitung
Kohler
Kohler Stargaze K-24019-GHW Bedienungsanleitung
Kohler
Kohler K-1314 Bedienungsanleitung
Kohler
Kohler BIOVE K-8277T-GR Bedienungsanleitung
Kohler
Kohler K-874-H Bedienungsanleitung
Kohler
Kohler Mariposa K-1229-W1 Benutzerhandbuch
Kohler
Kohler K-1113-LA Kurzanleitung
Kohler
Kohler Precedence K-1353-AA Bedienungsanleitung
Kohler
Kohler Underscore K-5714-XH2G Bedienungsanleitung
Kohler
Kohler STERLING Whirlpool 7626 Series Bedienungsanleitung
Beliebte Badewanne Handbücher anderer Marken
Woodbridge
Woodbridge BJ500 Montageanleitung
Whirlpool
Whirlpool Ariel ARL-702 Bedienungsanleitung
TEIKO
TEIKO EXCELLENT DUO Bedienungsanleitung
American Standard
American Standard Colony 5-1/2' x 32" Bedienungsanleitung
American Standard
American Standard 3052OD.X0X Kurzanleitung
agape
agape MARSIGLIA AVAS1075 Bedienungsanleitung
