Kohler MODERN LIFE K-21841T Bedienungsanleitung

-1-

MODERN LIFE

INSTALLATION INSTRUCTIONS

TOUCHLESS WALL HUNG URINAL 3L

(3L)

K-21841T( )/K-21841T-C05( )

TOUCHLESS WALL HUNG URINAL W/ELECTROLYZED WATER 1L/AC

( ) (1L)

K-21841T-WEW

TOUCHLESS WALL HUNG URINAL W/ELECTROLYZED WATER 3L/AC

( ) (3L)

K-21841T-EW

TOUCHLESS WALL HUNG URINAL W/ELECTROLYZED WATER & IOT 0.5L/AC

( ) (0.5L)

K-21841T-YXEW

Please read these instructions carefully to familiarize

yourself with the required tools, materials, and installation

sequences. Follow the sections that pertain to your

particular installation. This will help you avoid costly

mistakes. In addition to proper installation, read all

operating and safety instructions.

All information in these instructions is based upon the

latest product information available at the time of

publication. Kohler China reserves the right to make

changes in product characteristics, packaging, or

availability at any time without notice.

These instructions contain important care, cleaning, and

warranty information -

please leave instructions for the

consumer

Fixture dimensions are nominal and conform to tolerances

established by ASME Standards (A112.19.2-2018).

The product complies with GB/T 6952-2015.·

Observe all local plumbing and building codes.

Carefully inspect the new urinal for damage.

Site preparation may require additional tools and

hardware.

Handle with care. Vitreous china can break

or chip if the product is handled carelessly.

CAUTION: Risk of personal injury or product

damage.

ASME (A112.19.2-

2018)

GB/T 6952-2015

Open end/adjustable wrenches

Tape measure

Basin wrench

Pipe wrench

Square

Level

Pliers

Socket wrench with sockets

Screw driver

Seal tape

Drill

Sealant

RECOMMENDED TOOLS AND MATERIALS (NOT SUPPLIED)RECOMMENDED TOOLS AND MATERIALS (NOT SUPPLIED)

()

BEFORE YOU BEGIN

2019

No.2 KOHLER ROAD, SANSHUI CENTRAL INDUSTRIAL PARK, LEPING TOWN, SANSHUI DIST., FOSHAN, GUANGDONG, PRC POST CODE 528137

2 528137

8# MENGSHAN RD, ECONOMIC DEVELOPMENT ZONE OF HUANTAI, ZIBO, SHANDONG, CHINA 256410

8 256410

NO.1 KOHLER STREET, ECONOMIC DEVELOPMENT ZONE OF FAKU COUNTY, SHENYANG LIAONING PROVINCE, PRC 110400

1 110400

POST CODE:

1323700-T01-B

-2-

SPECIFICATIONS

Model

K-21841T(DC w/o Electrolyzed Water 3L)

K-21841T-C05(AC w/o Electrolyzed Water 3L)

K-21841T-WEW(AC with Electrolyzed Water 1L)

K-21841T-EW(AC with Electrolyzed Water 3L)

K-21841T-YXEW(w/Electrolyzed Water & IOT AC 0.5L)

Power

DC power unit 4 "AA" size alkaline batteries (Batteries For Largess)

AC/DC transformer input AC 220V 50/60Hz (Sold Separately)

AC/DC Switch Power input AC 220V 50/60Hz

Liter per flushing

Water pressure at 0.18~0.55 MPa: Average no more than 0.5L

Water pressure at 0.1 MPa: no more than 0.5L

Water pressure at 0.18~0.55 MPa: no more than 1L

Water pressure at 0.1 MPa: no more than 1L

Average

Water pressure at 0.18~0.55 MPa: no more than 3L

Water pressure at 0.1 MPa: no more than 3L

Average

Temperature Environmental temperature: 1 to 55

Starting pressure 0.05Mpa~0.86MPa

Sensing distance 70 cm away from sensor

Testing time About 4 seconds

Flushing Mode Dual flushing (3L)

Flushing after used (0.5L/1L)

Note: the sensing distance in the table is measured with a 30x30cm board as the reflecting surface.

Sterilized water (refers to the tap water containing hypochlorite generated by chlorine ions after ionization): wash bowl

surface by sterilized water generated within working cycle, reduce bacteria growth on the urinal surface.

Different water quality might cause different sterilization effect.

K-21841T-YXEW contains a wireless transmission module with the model approval code: CMIIT ID:2018DP2230.

30x30cm

K-21841T-YXEW CMIIT ID:2018DP2230

K-21841T ( ) (3L)

K-21841T-C05 ( ) (3L)

K-21841T-WEW( ) ( ) ( ) (1L)

K-21841T-EW( ) ( ) ( ) (3L)

K-21841T-YXEW( ) ( ) ( ) ( ) ( ) (0.5L)

4 5 (AA 4)

220V AC 50/60Hz

0.18~0.55MPa 0.5L

0.1MPa 0.5L

0.18~0.55MPa 1L

0.1MPa 1L

0.18~0.55MPa 3L

0.1MPa 3L

155

0.05Mpa~0.86MPa

70cm

(3L)

(0.5L/1L)

1323700-T01-B

-3-

ROUGHING-IN

Unit:mm

Reference Value

Kohler reserves the right to change marked dimensions without prior notice.

Fig.1

Waste Pipe

Floor

404

600

Supply

190

140 115 318

697

168

135

307 343

Notice: To ensure an effective flush performance,

strongly recommended inner diameter of

water supply (including water meter, valve,

etc.) is no less than 25mm, and supplied

water pressure (sensor inlet dynamic

pressure) is 0.18MPa ~0.55MPa.

(

) 25mm (

) 0.18MPa ~0.55MPa

Notice: a. The dimensions above are just for reference.

b. * Indicates the location of inlet pipe, while inlet

connector size is G 1/2.

c. * Recommended dimensions for installation only,

please adjust according to actual situation.

b. * G 1/2

c. **

1323700-T01-B

-4-

(

)

NOTE:

For Retrofit Installations

For New Installations

If a pre-existing waste pipe will be used and will result

in an acceptable rim height (refer to the rough-in dimensions),

follow the retrofit installation instructions.

Turn the water supply line off, remove the existing urinal,

then cap off the water supply line inside the wall.

Install waste pipe as necessary to conform to the

roughing-in dimensions.

Install adequate support framing for the hangers as

needed.

Fig.2a

2a Fig.2b

PREPARE THE SITEPREPARE THE SITE

Drain Connection

Wall Hangers

Wall

No objects in the

Sensor before

1500mm

No objects in the

Sensor before

1000mm

Clapboard suggest

reference length is 450mm

450mm

Clapboard suggest

reference length is 450mm

450mm

450 450

1500 1000

800

No object within 800mm of the

width of the sensor bilateral symmetry

800mm

800

No object within 800mm of the

width of the sensor bilateral symmetry

800mm

Electronic components are pre-installed in factory.

Electronic Components InstallationElectronic Components Installation

1323700-T01-B

-5-

Install the Greeting light Assembly

(For K-21841T-WEW/K-21841T-EW/K-

21841T-YXEW)

Install the screw screwing in ceramic hole with hexagonal nut

locking, then the mounting bracket with lock nut installed,

after greeting light power connection to observe on the

ground icon is in accordance with the recommended size,

such as is not in conformity with the loosen locking nut can

adjust bracket that icon to recommended size.

(K-21841T-WEW/K-21841T-EW/K-21841T-

YXEW )

Fig.3

Fig.4

Control Box

Connector

Hex Nut

Nut

Bracket

Notes:

Light icon size reference value.

(Must be Recommended dimensions for installation)

300 15mm

505 20mm

149 10mm

Estimated about 620 20mm

to the wall

620 20mm

INSTALLATION

Install and uninstall the sensor controller

a. Install the sensor controller box.

b. Install the screw.

c. Connect the sensor wire.

Install and uninstall the Fixture, Valve

Assembly

Unscrew the screws on the Fixture, Valve Assembly. Remove

the Fixture, Valve Assembly from the urinal by moving it.

1323700-T01-B

Install DC Power Unit

1. Take out battery case assy., and loosen the screws (17).

Place 4 AA batteries into the battery case according to

negative and positive electrode marks on the battery case

cover (18). Tighten the screws on the battery case cover

(18).

do not mistake the battery electrodes, and do not

use the new and used batteries together.

2. Then insert the battery pack in the battery box bracket,

connect each colored connector to the corresponding

connector of the same color.

NOTE:

Power Connection

1. Please directly reference to install DC Power Unit when

installing K- 21841T (DC).

2. Please match K-16305T-NA AC power unit when installing

K-21841T-C05. The way of installation is as below:

1. (17) (18)

4 5 (18) (17)

1. K- 21841T

2. K-21841T-C05 K-16305T-NA

-6-

Fig.5

Install

Battery Box Asm

Bracket, Valve Asm

Control Box Asm

CAUTION:

a. Do not connect 220V AC Power supply to DC wiring

terminal.

b. Do not damage the covering of AC power unit or

remove screws to avoid leakage.

c. Outlet of AC power unit upward prohibited.

A. Fig.6: AC power unit connect way:

AC power unit is connected to electric control box by

connection wire.

a. 220V

A. 6

Fig.6

Connector

Wire prepared

by customer

Connector

Connect with the same color wire,

and protect connect area by insulation tape.

16305T-NA

AC Power Unit

Control Box Assy.

Outlet Downwards

Outlet Upwards

Connect to

Sensor

Connect to

Sensor

Connect to AC

Power Supply

Connect to AC

Power Supply

1323700-T01-B

-7-

3. AC/DC Switch Power connect way (for K-21841T-WEW/K-

21841T-EW/K-21841T-YXEW):

3. (K-21841T-WEW/K-21841T-EW/K-

21841T-YXEW )

Control Box

Connector

Switch Power

Fig.8

B. When installing the power uint in the bracket, please layout

bushing according to Fig.7 and thread wire through the

bushing.

Fig.7: Connection sketch while installing power uint in the

bracket.

One AC power unit can supply one

sensors at most.

CAUTION:

Fig.7

Notice:

a. Keep the connector away from water.

b. Don't mistake the direction of inlet and outlet.

c. Do not connect the DC output of AC power unit to AC

power supply.

d. Do not connect to power supply while installing.

Connection line is not supplied. AC connection wire with

insulating sleeving is recommended. Wire of which the

nominal section area of conductor is not less than 0.5mm

is also recommend. DC connection line use wire of which

the nominal section area is not less than 0.3mm . It is cut

according to acted installation requirements (The length of

cut wire is recommended less than10m).

e. The head AC power supply must be protected with

appropriate fuse.

f. Please confirm the AC power supply and water supply

should be shut off before maintaining the products with AC

power related.

0.5mm

0.3mm

10m

AC Power Unit

AC Power

Install in

the bracket

Bracket

Control Box Asm

Bushing

Floor

600 602

1323700-T01-B

Install hangers, L shape block and waste

pipe connector

Install hangers, L shape block and waste pipe connector

according to RI.

1. Gasket of waste pipe connector shall be soaked

into water for 2 seconds to lubricate.

2. Shorten the connector if necessary to match the

waste pipe on the wall.

NOTE:

Fig.9

Wall Hangers

Wall

Move the gasket to front of the pipe

before connecting to the urinal.

Install urinal

Fig.10

1. Flush testing. Remove the regulator (supplied) if water

press is too low.

2. Screw the connector into the sheath on the waste pipe. Do

not tighten(tighten after installation is finished). Apply

silicone sealant on the inside of the waste pipe on the wall.

1. ( )

()

Back of Urinal

Regulator

Nozzle

-8-

1323700-T01-B

3. Connect inlet pipe with corner valve.

4. Lift the urinal and insert the connector into the waste pipe

on the wall.

5. Hang the urinal onto the hangers. If the hangers need to be

adjusted, please fisrt take down the urinal.(Refer to Adjust

the hanger)

6. Check the connector and the waste pipe. If necessary,

rotate the waste pipe connector to ensure smooth

installation.

7. Push the urinal against the wall and tighten the 2 screws of

the hanger. Adjust the gap between urinal and wall by

adjusting the screws upwards and downwards(see Fig.11b).

8. Tighten the urinal with the L shape bracket on the wall with

the 2 screws through the screws holes on the side.

9. Tighten the connector with the sheath of the waste pipe.

10. Apply silicone sealant between urinal and wall.

()

7. 2

( 11b)

8. 2 L

10.

Fig.11a

11a

Fig.11b

11b

Screw Hole

Big Nut

Screw

Wall Hangers

Fig.12

Adjust the hanger

1. As shown in the picture below, firmly press the hanger with

the bolt through the waist-shaped hole.

Fixing Hole

Waist-shaped Hole

-9-

1323700-T01-B

-10-

Fig.13

2. As shown in the picture below, if the position of the urinal

needs to be adjusted, please take down the urinal and

knock the hanger slightly to adjust its position upwards and

downwards.

Adjust Upwards and Downwards

3. After the position of the urinal is decided, completely fix the

hanger with the bolt through the fixing holes on the hanger.

Install Urinal Cover

See Fig.#14

NOTE:

CAUTION:

1. Open urinal cover lock package and remove contents. Fix

hook and screw as shown.

2. Put urinal cover on the urinal.

3. Use supplied locking tool to install and tighten the screw.

4. Check that the urinal cover is properly locked.

Using a 5/8" wrench, assemble and tighen nut,

washer and lock nut on both sides of urinal.

Risk of chipping or breaking urinal. Do not

overtighen screws on urinal.

5/8"

Hook

Nut

Washer

Screw

Sleeve

Fig.14

1323700-T01-B

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Kohler Toilette Handbücher

Kohler

Kohler ARCHER K-4440T Bedienungsanleitung

Kohler

Kohler REVE K-20766T-S Bedienungsanleitung

Kohler

Kohler K-8423A-0 Montageanleitung

Kohler

Kohler Escale K-25089T-S Bedienungsanleitung

Kohler

Kohler K-22250T-130 Bedienungsanleitung

Kohler

Kohler Karing K-77780-0 Bedienungsanleitung

Kohler

Kohler VEIL K-5401T Bedienungsanleitung

Kohler

Kohler SAN MARTINE K-5503T-C Bedienungsanleitung

Kohler

Kohler K-4734-NY Montageanleitung

Kohler

Kohler SAN RAPHAEL GRANDE K-8688T-TPF Bedienungsanleitung

Kohler

Kohler K-4917 Montageanleitung

Kohler

Kohler Escale K-25091T-S Bedienungsanleitung

Kohler

Kohler K-3447 Bedienungsanleitung

Kohler

Kohler KARING 2.0 K-77780T-0 Bedienungsanleitung

Kohler

Kohler REVE K-20766T-S Bedienungsanleitung

Kohler

Kohler K-4026 Montageanleitung

Kohler

Kohler VIA K-20629T-BW Bedienungsanleitung

Kohler

Kohler REACH COMPACT K-29216T-NS Bedienungsanleitung

Kohler

Kohler K4915 Bedienungsanleitung

Kohler

Kohler K-11456 Montageanleitung

Kohler

Kohler K-24097X Montageanleitung

Kohler

Kohler PANACHE K-9154T Bedienungsanleitung

Kohler

Kohler Memoirs K-724-G96 Bedienungsanleitung

Kohler

Kohler K-3654 Montageanleitung

Beliebte Toilette Handbücher anderer Marken

Toto

Toto Washlet TCF4911 Series Bedienungsanleitung

Grohe

Grohe Sensia ARENA Bedienungsanleitung

Geberit

Geberit AQUACLEAN MERA CLASSIC Bedienungsanleitung

Better Bathrooms

Better Bathrooms BUN/BeBa 27555/78725 Bedienungsanleitung

American Standard

American Standard CONCEPT Cube TF-2704 Bedienungsanleitung

BIOLAN

BIOLAN ECO Stücklistenhandbuch

Thetford

Thetford C260 Series Bedienungsanleitung

KELISS

KELISS T162A Series Bedienungsanleitung

BIOLAN

BIOLAN GARDEN TOILET Stücklistenhandbuch

washloo

washloo Prestige Bedienungsanleitung

JABSCO

JABSCO 37010 Series Bedienungsanleitung

Olympia

Olympia EPOQUE 69209 Bedienungsanleitung

DENCK

DENCK PURE-D Bedienungsanleitung

Silent Venus

Silent Venus SVP600 Wartungs- und Serviceanleitung

InBe

InBe IB/04.06050 Bedienungsanleitung

Swiss Madison

Swiss Madison Carré SM-1T264 Bedienungsanleitung

agape

agape PEAR 2 Bedienungsanleitung

Roca

Roca DAMA SENSO COMPACT Bedienungsanleitung