CO2Gas Tubing (larger inner diameter tubing):
The length of your gas tubing won’t aect serving the beer. Extra
gas line is included to accommodate dierent set ups. We suggest
you cut to length for your set up or roll up the extra and zip tie it.
If you have a 2 or 3 faucet tower you will need to cut your gas line
and install the Duotight tees to split the gas line.
Beer Line Tubing (smaller inner diameter tubing):
Do not cut the beer line. It is already cut to the correct length to
ensure there is enough resistance to reduce foaming.
Using Duotight:
Attach the correct Duotight fittings to the keg coupler or quick
disconnects you are using. Duotight fittings should be threaded
on as tight as possible by hand and then turned an additional 180
degrees with a wrench. For pictures of additional styles of couplers
or quick disconnects see page 14.
Not Using Duotight:
If you did not purchase Duotight fittings and have couplers or quick
disconnects with traditional barbs we have included some stepless
clamps. Because the EVA Barrier tubing is an advanced two layer
tubing it is dicult to fit over barbs. Follow these steps:
1. Boil a cup of water and dip the end of tubing for 15 seconds to
soften.
2. Place stepless clamp onto tubing.
3. Insert needle-nose pliers into tubing and expand the pliers to
increase the size of the opening.
4. Push tubing onto the barb fitting and crimp the clamp securely
with pinch clamp pliers or wire cutter pliers.
CONNECTING THE GAS TUBING & BEER LINE:
Your Komos Kegerator includes very high quality EVA Barrier tubing that is designed to work best with
Duotight connectors. Compared to standard PVC tubing, EVA Barrier is a double lined tubing that is
BPA free and greatly reduces CO2loss.
10
Duotight Gas Line Tee
GAS BEVERAGE
Gas & Beverage Quick Disconnects
With Duotight Fittings
GAS IN BEER
OUT
Commercial Tap
With Duotight Fittings
