Kompernass KH1220 Bedienungsanleitung
6
KOMPERNASS GMBH · BURGSTRASSE 21 · D-44867 BOCHUM
www.kompernass.com
ID-Nr.: KH1220-05/08-V2
CV_KH1220_E23705_LB6.qxd 18.07.2008 13:45 Uhr Seite 1
WINE COOLER
Operating instructions
WINE COOLER
KH1220
CV_KH1220_E23705_LB6.qxd 18.07.2008 13:45 Uhr Seite 2
CV_KH1220_E23705_LB6.qxd 18.07.2008 13:45 Uhr Seite 3
KH 1220
w
q
8
7
6
0
9
15
4
3
2
CV_KH1220_E23705_LB6.qxd 18.07.2008 13:45 Uhr Seite 4
CV_KH1220_E23705_LB6.qxd 18.07.2008 13:45 Uhr Seite 5
CV_KH1220_E23705_LB6.qxd 18.07.2008 13:45 Uhr Seite 6
- 1 -
CONTENT PAGE
Intended Use 2
Safety instructions 2
Technical data 3
Description of the appliance 3
Before the First Use 3
Assembling the adjustable feet .......................................................................................................3
Assembling the spacer.....................................................................................................................3
Placement of the bottle grill.............................................................................................................3
Placement ..........................................................................................................................................3
Operation 4
Temperature control of wine............................................................................................................4
Illumination........................................................................................................................................4
Recommended temperatures 5
Cleaning and Care 5
Troubleshooting 6
Disposal 7
Importer 7
Warranty and Service 7
Read these operating instructions carefully before using the appliance for the first time and preserve this
maual for later reference. Pass this manual on to whoever might acquire the appliance at a future date.
IB_KH1220_E23705_LB6 18.07.2008 13:57 Uhr Seite 1
- 2 -
WINE COOLER KH1220
Intended Use
This appliance is intended exclusively for the cooling
of sealed bottles of wine, or similar beverages in
bottles, in the indoor rooms of domestic households.
The appliance is not designed for use in commercial
or industrial applications.
Please take note that this wine cooler is to be used
exclusively for the storing of sealed bottles of wine.
The appliance is not suitable for storing unsealed
bottles of wine and unpacked or opened food
products!
Safety instructions
Risk of electric shock!
• Do not use the appliance outdoors.
NEVER submerse the appliance in water or
other liquids!
• Arrange for defective power plugs and/or cables
to be replaced at once by qualified technicians
or our Customer Service Department.
• Do not fold or crush the power cable. Keep the
power cable well away from sources of heat.
• NEVER grasp the power cable or the power
plug with wet hands.
Risk of personal injury!
• So that you can disconnect the appliance quickly in
the event of an emergency, do not use extension
cables.
• This appliance is not intended for use by individuals
(including children) with restricted physical,
physiological or intellectual abilities or deficiences
in experience and/or knowledge unless they
are supervised by a person responsible for their
safety or receive from this person instruction in
how the appliance is to be used.
• Children should be supervised to ensure that
they do not play with the appliance..
Important! Appliance Damage!
• Do NOT place vases or other containers filled
with liquids on the appliance!
• Ensure that the ventilation slits of the appliance
are not covered when it is in use. Risk of over-
heating! Maintain a clear distance of approx.
15 cm between the ventilation slits and other
objects.
• Do NOT operate the appliance in areas with
high humidity (bathrooms etc.) or in spaces where
explosive or easily inflammable materials or gases
are stored. Rooms which may have poor air
circulation, e.g. garages, are also unsuitable.
• Transport the cooler cabinet ONLY when it is
empty. Remove all bottles before the transportation.
• Do NOT place the appliance close to open flames
or other sources of heat (heating, direct sunlight,
gas stoves etc.).
• NEVER place the appliance in a built-in cupboard,
recesses or similar.
• This appliance is equipped with non-slip rubber
feet. As furniture surfaces are made of a variety
of materials and are treated with many different
types of cleaning agents, it cannot be completely
ruled out that some of these substances may
contain ingredients which could corrode the rubber
rests and soften them. If possible place an anti-
slip material under the feet of the device.
IB_KH1220_E23705_LB6 18.07.2008 13:57 Uhr Seite 2
- 3 -
Technical data
Rated voltage: 220 - 240 V ~50Hz
max. Power consumption: 70 W
Temperature range : 4 - 22°C
LED-Class: 1
Description of the appliance
1Display
2Temperature increase button
3Temperature decrease button
4Light button
5ON/OFF button
6Door
7Grip
8Power cable with power plug
9Adjustable feet
0Bottle grill
qVentilator
wSpacer
Before the First Use
Assembling the adjustable feet
To assemble the adjustable feet 9it is best to lay
the cooler cabinet on its side.
Note:
One of the adjustable feet 9is somewhat shorter
than the other three. This adjustable foot must be
screwed into the threaded hole located to the front
right of the hinge retainer.
• Screw the adjustable feet 9into the designated
threaded holes at the corners on the underside
of the appliance.
Assembling the spacer
Important!
NEVER operate the appliance without the spacer w!
The ventilation slits could become covered. This
would lead to overheating and cause irreparable
damage to the appliance.
• Screw the spacer wonto the rear of the cooler
cabinet, as shown on the fold-out side.
Placement of the bottle grill
• Slide the bottle grill 0into the guide rails.
Ensure that the recesses for the bottles point
downwards.
Note:
• Slide the bottle grills 0along the guide rails until
they engage. If the bottle grills 0do not engage,
they have been inserted the wrong way round.
• You can also stand the bottles upright in the wine
cooler cabinet. To do this, remove the bottle grills 0.
Placement
Important!
When the appliance is in use, ensure that the venti-
lation slits and the ventilator qcannot be covered.
Risk of overheating! Maintain a clear distance of
approx. 15 cm between the ventilation slits and
other objects.
Place the wine cooler cabinet on to a clean and
level surface.
Should the wine cooler cabinet sway a little, the
unevenness of the footprint can be levelled by cali-
bration of the adjustment feet 9. For this, turn the
appropriate adjustment foot 9until the wine cooler
cabinet is standing firmly.
IB_KH1220_E23705_LB6 18.07.2008 13:57 Uhr Seite 3
- 4 -
Operation
Temperature control of wine
With this wine cooler cabinet you can tune it to operate
at temperatures between 4°C and 22°C.
Tips:
• Subject to the ambient temperature, the appliance
effects a maximum cooling of 15°C. The lowest
attainable temperature lies by 4°C. This means
that, if you want to cool beverages down to 4°C,
the ambient temperature may amount to no more
than 19°C.
• You should therefore place the wine cooler cabinet
at the coolest possible location, one that is not
warmed up by the sun.
• Do NOT place it adjacent to heat-radiating
appliances such as heating elements or stoves.
• The appliance cannot effect a warm-up. If the
room temperature is cooler than the adjusted
temperature, the refrigeration switches itself off.
The temperature then comes to a maximum of
the ambient room temperature.
• To achieve a good cooling performance, lay at
least three bottles in the appliance.
1. Insert the power plug 8into a wall socket.
Ensure that the power being supplied from the
wall socket tallies with the power details given
on the type plate.
2. Press the button ON/OFF 5. After a brief
moment the display 1shows the interior tempe-
rature of the wine cooler cabinet.
3. Press either the button 2or 3to set
the desired temperature.
The display 1blinks and shows the programmed
temperature. When you stop pressing the button
the blinking stops and the display 1shows
once again the current interior temperature.
The wine cooler cabinet now slowly cools down
to the programmed temperature.
• To switch the wine cooler cabinet off, press the
button On/Off 5. The programmed tempe-
rature is erased. With the next switch-on of the
appliance the temperature must be once again
programmed in.
Tip!
Always fill the wine cooler cabinet from the bottom
to the top. This will cool the bottles faster.
Illumination
If you wish, you can switch on illumination in the
interior of the wine cooler cabinet. For this, press
the Light 4button. When you wish to switch
the light off, press the button Light 4once
again.
Note:
Illumination contributes to a warming of the interior.
Therefore, switch the lighting off if it is not needed.
This also saves energy!
Important!
As the light diodes in the interior of the wine cooler
cabinet have an extremely long lifespan it is not
necessary, and also not possible, to exchange them.
The light diodes are firmly assembled into the illumi-
nation. Under no circumstances should you open
the illumination! This would irreparably damage the
appliance.
IB_KH1220_E23705_LB6 18.07.2008 13:57 Uhr Seite 4
Inhaltsverzeichnis
