Konfor SPS-916W Bedienungsanleitung
Ｈｕｍｉｄｉｆｉｅｒ
ＳＰＳ－９１６Ｗ
3
Package Contents
Specifications
Safety Information
Getting to Know Your Humidifier
·LCD Display
·Control Panel
Getting Started
Operation
·General Operation
·LCD Display
·Control Panel
·Humidity Sensor
·Automatic Shut O
VeSync App Setup
·Smart Configuration Mode
·APN Mode
Using the App
·Humidity Levels
·Mist Levels
·Schedules
·Timer
·Device Settings
·Share Device
·Firmware Updates
·Deleting Your Humidifier
·Resetting Your Humidifier
Using the Aroma Box
Preventing Water Leaks
Keeping Things Clean
·General Cleaning
·Cleaning the Aroma Pad
·Disinfecting the Humidifier
Replacing the Remote Control Battery
Troubleshooting
VeSync App Troubleshooting
Warranty Information
Customer Support
3
3
4
5
7
7
8
10
10
11
12
14
14
15
15
20
24
26
27
27
29
30
30
33
34
34
36
37
38
38
39
39
40
41
44
45
46
TABLE OF CONTENTS
SPECIFICATIONS
1 x SPS-916W Smart Hybrid Ultrasonic Humidifer
1 x User Manual
3 x Aroma Pads (1 Pre-Installed)
1 x Remote Control
1 x 3V CR2025 Battery (Pre-Installed)
1 x Cleaning Brush
PACKAGE CONTENTS
Power Supply AC 120V, 60Hz
Rated Power 110W
Water Tank Capacity 1.4 gal (5.5 L)
Humidity Range 30%–80% RH
Max Moisture Output Cool Mist: 300 mL/h
Warm Mist: 500 mL/h
Warm Mist
Temperature
104˚F (40˚C)
Eective Range 430–753 ft² (40–70 m²)
4
SAFETY INFORMATION
To reduce the risk of fire, electric shock, or other injury, follow all instructions and safety guidelines.
• Ensure that the plug fits properly into a polarized
socket.
• Do not handle the power cord or plug with wet
hands. Keep the plug and power cord away from
liquids.
• Your humidifier has a polarized plug (one prong
is wider than the other), which fits into a polarized
outlet only one way. This is a safety feature to
reduce the risk of electric shock. If the plug does
not fit, reverse the plug. If it still does not fit, do not
use the plug in that outlet. Do not bypass this safety
feature.
General Safety
Plug & Cord
• Only use this humidifier as described in this manual.
• Place the humidifier and cord so that the humidifier
will not be knocked over.
• When not in use, turn the machine o and
disconnect from power source by removing the
plug from the outlet.
• Do not overfill the water tank. This may cause
electric shock.
• Do not use this humidifier in wet environments.
• Keep the humidifier out of reach from children.
• Do not open the base or remove the water level
sensor for self-servicing.
• Always unplug your humidifier before cleaning your
humidifier or detaching the water tank from the
humidifier base.
• Direct the nozzle so that the mist is at least 40
inches (102 cm) from walls.
• Only fill the water tank with clean water. Never fill
the water tank with any other liquids.
• Do not place the humidifier near sources of heat,
such as stovetops, ovens, or radiators.
• Do not place the humidifier directly on floors,
carpets, or rugs.
READ AND SAVE THESE
INSTRUCTIONS
Not for commercial use. Household
use only.
• Do not cover the nozzle while the humidifier is
on. Doing so may damage the humidifier. Do not
immerse the humidifier base, power cord, or plug
in water.
• If the humidifier is damaged or is not functioning
properly, stop using it and contact Customer
Support immediately (page 46).
5
GETTING TO KNOW YOUR HUMIDIFIER
1. Handle
2. Nozzle
3. Water Tank
4. LED Display
5. Control Panel
6. Safety Lock
7. Base
8. Humidity Sensor
9. Aroma Pad
10. Aroma Box
11. Remote
1
2
3
4
56
7
9
8
10
11
6
12. Water Tank Cap
13. Mist Tube
14. Water Level Sensor
15. Heating Element
16. Inner Chamber
17. Cleaning Brush
18. Night Light
19. Cleaning Brush Storage
20. Air Vent
21. Transducer
22. Power Cord
12
15
14
13
19
18
20
21
22
17
16
GETTING TO KNOW YOUR HUMIDIFIER
(cont.)
7
LCD Display
Control Panel
1. Timer
2. Mist Icon
3. No Water Indicator
4. Warm Mist Icon
5. Night Light Icon
6. WiFi Icon
7. Auto Mode Indicator
8. Relative Humidity Level
(RH)
9. Mist Level Indicator
10. Temperature Unit
11. Ambient Temperature
1. Power/VeSync
Configuration Button
2. Display O Button
3. Warm Mist Button
4. Night Light Button
5. Humidity Level Button
6. Timer Button
7. Mist Level Buttons
8. Decrease Button
9. Increase Button
1
11
1 2 3 4 5 6
7 8 9
2 3 4 5 6
8
7
9
10
ON/OFF DISPLAY WARM LIGHT HUMIDITY TIMER
GETTING TO KNOW YOUR HUMIDIFIER
(cont.)
8
GETTING STARTED
1. Turn the safety lock to the position.
[Figure 1.1]
2. Remove the nozzle cap from the top of the
water tank and set aside. [Figure 1.2]
Figure 1.1
Figure 1.4
Figure 1.3
Figure 1.2
3. Lift up the handle, then pull up on the handle
to remove the water tank from the base.
[Figure 1.3]
4. Flip the tank over and twist the water tank
cap counterclockwise to remove it and set it
aside. [Figure 1.4]
9
GETTING STARTED (cont.)
5. Fill the tank with cold or room temperature
water. You can see how much water is in
the tank by looking into the water tank.
The maximum capacity is 1.4 gallons (5.5 L).
[Figure 1.5]
6. Replace the cap once you have filled the tank
to no greater than the maximum capacity.
Twist it clockwise to secure it tightly to the
water tank. [Figure 1.6]
7. Carefully place the water tank back onto the
base, aligning the water tank cap with the
inner chamber. [Figure 1.7]
Figure 1.5
Figure 1.6
NOTE:
• Fill the water tank with distilled water, at least
half full.
• Do not fill the water tank with hot water.
• Do not add water through the nozzles or mist
tube.
Figure 1.7
10
8. Turn the safety lock to the position.
[Figure 1.8]
9. Replace the nozzle. [Figure 1.9]
Figure 1.8
NOTE: Wipe o any excess water on the top and
bottom of the base before replacing the water
tank.
Figure 1.9
OPERATION
General Operation
1. Place the humidifier on level, elevated surfaces,
such as tables or nightstands. Make sure the
room is well-ventilated.
2. Plug in the humidifier. The display icons will light
up and turn o.
3. Tap once to turn on the humidifier. [Figure 2.1]
The humidifier will start misting.
a. If there is no water in the tank, will light
up. Unplug the humidifier and refill the water
tank. See Getting Started (page 8).
b. If the last humidity setting is lower than the
humidity level of the environment, it will
release mist for a few seconds and then
stop misting.
3. (Optional) Press the mist level controls to change
the mist level. [Figure 2.2]
4. Press to turn o the humidifier.
GETTING STARTED
(cont.)
NOTE: Position the humidifier at least 10 inches
(25 cm) away from walls, and direct the nozzles
so that the produced mist is at least 40 inches
(102 cm) away from walls.
Figure 2.1 Figure 2.2
ON / OFF DISPLAYA RM LIGHTW
ON/ OFF ISPL AY WARM LIGHTH UMIDITY IMERD T
Inhaltsverzeichnis
Andere Konfor Luftbefeuchter Handbücher
