Kongsberg EA 600 Bedienungsanleitung

EA 600

Single beam hydrographic echo sounder

Base version, installation and maintenance information

Instruction Manual

(CD6559A)

857-164688

EA 600

Single beam echo sounder

Instruction manual

Document revisions

Rev Date Written by Checked by Approved by

E19.12.06 EB TKj TKj

General update.

About this document

The information contained in this document is subject to change without prior notice.

Kongsberg Maritime AS shall not be liable for errors contained herein, or for incidental

or consequential damages in connection with the furnishing, performance, or use of this

document.

reproduced or otherwise copied without prior permission from Kongsberg Maritime

AS.

Support: km.hydrogr[email protected]

24 hrs support telephone: +4799203801

Strandpromenaden 50

P.O.Box 111

N-3191 Horten,

Norway

Instruction manual

857-164688 / E

Chapters

This book is the installation manual for the EA 600. It describes how to install and

maintain the various units used by the EA 600 system.

1Introduction

Refer to page 1.

2 Hardware installation

Refer to page 19.

3 Transducer installation

Refer to page 30.

4 GPT description and maintenance

Refer to page 47.

5 Replacement procedures

Refer to page 65.

6 Cable layout

Refer to page 69.

7 Spare parts

Refer to page 92.

8 Drawing file

Refer to page 95.

9 Appendices

Refer to page 135.

EA 600 / Base version

II 857-164688 / E

Remarks

References

Further information about the EA 600 system supplied, may be found in the following

manuals:

•EA 600 Operator manual

The reader

This manual is intended to be used by a trained maintenance technician or engineer,

with experience of electronic and digital circuitry, computers and electromechanical

design. The level of information is based on Simrad’s maintenance philosophy: The

onboard technical personnel shall, with the help of the documentation and the system’s

built-in test functions, be able to identify malfunctions, locate the fault, and replace

major parts, modules and components on the “Line Replaceable Unit” (LRU) level.

He/she will however not attempt to repair the LRUs.

Instruction manual

III

857-164688 / E

1 INTRODUCTION 1.........................................

1.1 Overview 1................................................

1.2 Maintenance philosophy 2....................................

1.3 General safety rules 3........................................

1.4 System overview 4..........................................

Key facts 4...............................................

Main units 4..............................................

1.5 System diagrams 6..........................................

1.6 Technical specifications 11....................................

Echosounder system 12......................................

External interfaces 13........................................

General Purpose Transceiver (GPT) 14..........................

GPT Cabinet (IP55) 15......................................

Processor Unit 16...........................................

Operator Station 17.........................................

Ethernet HUB 18...........................................

2 HARDWARE INSTALLATION 19............................

2.1 Introduction 19..............................................

2.2 Basic procedure 20...........................................

Purpose 20................................................

Parts configuration 20.......................................

Transducer(s) 20............................................

Operator Station, keyboard and display 20.......................

General Purpose Transceiver 20................................

Interfaces 20...............................................

2.3 Parts and configurations 22....................................

Overview 22...............................................

Transducer 22..............................................

Transceiver 23.............................................

Display Unit 24............................................

Software 24...............................................

Printer 24.................................................

2.4 General Purpose Transceiver (GPT) 25...........................

Overview 25...............................................

Procedure 25...............................................

2.5 Operator Station 26..........................................

2.6 Printer 27..................................................

Introduction 27.............................................

Hardware installation 27.....................................

EA 600 / Base version

IV 857-164688 / E

Software installation 27......................................

Software installation of unlisted printer 29.......................

3 TRANSDUCER INSTALLATION 30..........................

3.1 Transducer location 30........................................

General 30................................................

Go deep 30................................................

Boundary water layer 30.....................................

Propeller noise 31...........................................

Vessel heave 32............................................

Noises from protruding objects on the hull 32.....................

Summary 33...............................................

3.2 Ways of mounting the transducer 34.............................

Inclination of the transducer face 34............................

External mount 34..........................................

Transducer blister 36........................................

In a box keel 38............................................

Retractable transducer 38.....................................

Centre board 40............................................

Flush mounting in a steel tank 41..............................

Behind a protective acoustic window 42.........................

Inside the hull 43...........................................

3.3 Approved anti--fouling paints 46................................

4 GENERAL PURPOSE TRANSCEIVER (GPT)

DESCRIPTION AND MAINTENANCE 47.........................

4.1 Description and main functions 47..............................

Overview 47...............................................

4.2 GPT drawing 48.............................................

Circuit boards and modules 49.................................

4.3 GPT -- Theory of operation 50..................................

Overview 50...............................................

Simplified block diagram 51..................................

4.4 Circuit board descriptions 52...................................

Overview 52...............................................

Digital Signal Processing board, DSP-6x 53......................

TRX board 55..............................................

I/O board 56...............................................

GPT Power supply 57.......................................

4.5 Maintenance on the GPT 59...................................

5 REPLACEMENT PROCEDURES 65...........................

5.1 Introduction 65..............................................

Instruction manual

857-164688 / E

Overview 65...............................................

Tools required 66...........................................

5.2 General Purpose Transceiver (GPT) procedures 67.................

Overview 67...............................................

Circuit boards and modules 67.................................

Power Supply 68...........................................

6 CABLE LAYOUT 69..........................................

6.1 Introduction 69..............................................

6.2 Cable plans and specifications 70...............................

Configurations 70...........................................

Basic 70..................................................

Hydrographic Operator Station (HOS) 70........................

GPT Cabinet 70............................................

Processing Unit 71..........................................

Hydrographic Operator Station 74..............................

General Purpose Transceiver (GPT) 78..........................

GPT Cabinet 83............................................

6.3 External interfaces 87........................................

Overview 87...............................................

Navigation (GPS) 87........................................

Depth output 87............................................

Heave sensor 88............................................

Temperature sensor 88.......................................

Colour printer 88...........................................

External “Event” triggering 89.................................

External “New line number” triggering 89.......................

6.4 External triggering 90........................................

Overview 90...............................................

Master system 90...........................................

Slave system 91............................................

7 SPARE PARTS 92............................................

7.1 Overview 92................................................

7.2 GPT spare parts 93...........................................

GPT spare parts (example) 93.................................

8DRAWINGFILE 95..........................................

8.1 Overview 95................................................

Generic RS-232 serial line (DCE) 109............................

Generic RS-232 Serial line 110.................................

EA 600 / Base version

VI 857-164688 / E

Standard AC power cable 111..................................

EMC ground 112............................................

Battery 113.................................................

Ethernet with RJ45 plugs (screened) 114..........................

Standard VGA cable 115......................................

Standard USB cable 116......................................

Keyboard cable 117..........................................

Mouse or pointing device cable 118.............................

Printer cable 119............................................

GPT Cabinet interface cables 120...............................

Remote on/off 122...........................................

GPT Remote synchronisation 123...............................

Motion and temperature sensors 124.............................

New Event and Line number 125................................

Transducer(s) 126............................................

9 APPENDICES 135.............................................

9.1 Overview 135................................................

9.2 Equipment handling 136.......................................

Introduction 136.............................................

Transportation 136...........................................

Initial preservation 137.......................................

Inspection and unpacking 139..................................

Storage 142.................................................

After use storage 142.........................................

Re-packing 144.............................................

ESD precautions 145.........................................

Temperature protection 146....................................

9.3 Warranty 146................................................

9.4 Basic cabling requirements 147..................................

9.5 Cable gland assembly procedure 150..............................

Purpose 150................................................

General procedure 150........................................

Securing and terminating the cables 151..........................

Multi-diameter modules 152...................................

Standard type 154............................................

Additional type 1 (842-093878) 156.............................

Additional type 2 (541-093642) 156.............................

Inhaltsverzeichnis

Andere Kongsberg Schiffsausrüstung Handbücher

Kongsberg

Kongsberg Simrad CS90 Bedienungsanleitung

Kongsberg

Kongsberg Seatex Seapath 200 Bedienungsanleitung

Kongsberg

Kongsberg APOS Survey Bedienungsanleitung

Kongsberg

Kongsberg Simrad EK80 Bedienungsanleitung

Kongsberg

Kongsberg EM 2040C Bedienungsanleitung

Kongsberg

Kongsberg HOS 152 - DATASHEET REV A Bedienungsanleitung

Kongsberg

Kongsberg HiPAP 502 Bedienungsanleitung

Kongsberg

Kongsberg Simrad EM 300 Bedienungsanleitung

Kongsberg

Kongsberg Simrad FS70 Bedienungsanleitung

Kongsberg

Kongsberg EA640 Bedienungsanleitung

Kongsberg

Kongsberg M3 Bathy Bedienungsanleitung

Kongsberg

Kongsberg M3 Sonar Bedienungsanleitung

Kongsberg

Kongsberg Simrad WP32 Bedienungsanleitung

Kongsberg

Kongsberg EM 710 Bedienungsanleitung

Kongsberg

Kongsberg mPAP Bedienungsanleitung

Kongsberg

Kongsberg SBP 120 Bedienungsanleitung

Kongsberg

Kongsberg RV-2 Bedienungsanleitung

Kongsberg

Kongsberg Simrad IS12 Bedienungsanleitung

Kongsberg

Kongsberg Seatex RADius 1000 Stücklistenhandbuch

Kongsberg

Kongsberg EM 3002 Bedienungsanleitung

Kongsberg

Kongsberg EN 250 - DATASHEET REV C Bedienungsanleitung

Kongsberg

Kongsberg EM 3002 Technische Daten

Kongsberg

Kongsberg EM 124 Bedienungsanleitung

Kongsberg

Kongsberg SIMRAD IS15 Expander Bedienungsanleitung

Beliebte Schiffsausrüstung Handbücher anderer Marken

Clarion

Clarion CMS2 Reparaturanleitung

EBS

EBS M7000 Bedienungsanleitung

NPK

NPK SCS-1002 Bedienungsanleitung

Furuno

Furuno FE-800 Bedienungsanleitung

Harken

Harken 1561 Bedienungsanleitung

Simrad

Simrad DD15 Bedienungsanleitung

Notifier

Notifier FS-BSO Bedienungsanleitung

Raymarine

Raymarine ST40 Bedienungsanleitung

E2S

E2S E2XS112UL Bedienungsanleitung

R2Sonic

R2Sonic 2026 Bedienungsanleitung

COBHAM

COBHAM SAILOR 6000 Bedienungsanleitung

Raymarine

Raymarine Maxiview ST80 Benutzerhandbuch

GUIDANCE MARINE

GUIDANCE MARINE 20- Series Montageanleitung

Raymarine

Raymarine ST60 Tridata Benutzerhandbuch

Sonic

Sonic 2024 Bedienungsanleitung

Quicksilver

Quicksilver 88688A25 Handbuch

Furuno

Furuno Navtex NX-700-A Bedienungsanleitung

olympia electronics

olympia electronics ΒS-532/WP Bedienungsanleitung