Konica Minolta Bizhub 361 Gebrauchsanweisung

501/421/361 x-1

Introduction

Thank you for choosing this machine.

The bizhub 501/421/361 User’s Guide [Enlarge Display Operations] contains

details on the operation of the various functions available in the Enlarge

Display mode of the bizhub 501/421/361 and on the various operating

precautions. In order to ensure that this machine is used correctly and

efficiently, carefully read the Enlarge Display Mode Operations volume of the

User’s Guide before using the machine.

For descriptions on trademarks and copyrights, refer to [Trademarks/

Copyrights].

Views of the actual equipment may be slightly different from the illustrations

used in this Enlarge Display Mode Operations volume of the User’s Guide.

Explanation of manual conventions

7 CAUTION

CAUTION

%Failure to observe instructions highlighted in this manner may result in serious

injuries or property damage.

Observe all cautions in order to ensure safe use of this machine.

Reminder

Text highlighted in this manner indicates operation precautions. Carefully read

and observe this type of information.

Detail

Text highlighted in this manner provides more detailed information concerning

operating procedures and other descriptions.

Note

Text highlighted in this manner indicates sections containing additional

information. If necessary, refer to the indicated sections.

501/421/361 x-2

[ ]

Names highlighted as shown above indicate keys on the control panel and

buttons in the touch panel.

501/421/361 x-3

Contents

1 Before use

1.1 Names of control panel parts and their functions ................... 1-2

1.2 Adjusting the angle of the control panel ................................... 1-4

1.2.1 To adjust the angle of the control panel ......................................1-4

1.3 Screens in Enlarge Display mode .............................................. 1-6

1.3.1 Displaying screens in Enlarge Display mode ...............................1-6

1.4 Touch panel ................................................................................. 1-8

1.4.1 Touch panel operation .................................................................1-8

1.4.2 Icons that appear in the screen ...................................................1-8

1.4.3 Paper type icons ..........................................................................1-9

1.4.4 Paper supply icons ....................................................................1-10

1.5 Feeding the original .................................................................. 1-11

1.5.1 Loading the original into the ADF ..............................................1-11

1.5.2 Placing the original on the original glass ...................................1-12

1.6 Specifying original settings ...................................................... 1-13

1.6.1 Copying originals of mixed sizes ("Mixed Original" setting) ......1-13

1.6.2 Loading folded originals ("Z-Folded Original" setting) ..............1-15

1.6.3 Selecting the original orientation (Original Direction settings) ...1-17

1.6.4 Selecting the position of the binding margin (Original Binding

Position/Binding Position settings) ............................................1-19

2 Using copy functions

2.1 General copy operation .............................................................. 2-2

2.2 Selecting the Paper settings ...................................................... 2-4

2.2.1 Automatically selecting the paper size ("Auto" Paper setting) ....2-4

2.2.2 Manually selecting the desired paper size ...................................2-6

2.3 Specifying a Zoom setting ......................................................... 2-7

2.3.1 Selecting a zoom ratio .................................................................2-8

2.4 Selecting original and copy settings ......................................... 2-9

2.4.1 Selecting single-sided or double-sided copies .........................2-10

501/421/361 x-4

2.5 Selecting a combined copy setting ......................................... 2-12

2.6 Selecting Finishing settings ..................................................... 2-14

2.6.1 Selecting the finishing method ..................................................2-15

2.6.2 Selecting Staple/Punch settings ................................................2-16

2.6.3 Selecting a folding or binding setting ........................................2-18

2.7 Selecting not to rotate the image ............................................ 2-20

2.8 Selecting the quality of the original ......................................... 2-21

2.9 Selecting the density settings .................................................. 2-23

2.9.1 Adjusting the print density (Density settings) ............................2-23

2.9.2 Adjusting the background density

(Background Removal settings) .................................................2-24

2.10 Selecting the Paper settings .................................................... 2-26

2.10.1Selecting a Paper Type setting for the bypass tray ...................2-26

2.10.2Selecting a Paper Size setting for the bypass tray ....................2-29

2.11 Scanning the next original to be copied while a copy job is being

printed (next job reservation) ................................................... 2-32

2.12 Pausing scanning/printing ....................................................... 2-33

2.13 Printing a proof to check the settings (Proof Copy) .............. 2-34

3 Using fax/scanning functions

3.1 General fax/scan operation ........................................................ 3-2

3.2 Specifying a destination ............................................................. 3-4

3.2.1 Selecting a destination from the address book ...........................3-5

3.2.2 Selecting a destination from the job log ......................................3-7

3.2.3 Selecting a destination with an LDAP search ..............................3-9

3.2.4 Directly typing in the number .....................................................3-12

3.3 Specifying scanning settings (Scan Settings) ........................ 3-14

3.3.1 Simplex/Duplex ..........................................................................3-14

3.3.2 Original Type ..............................................................................3-16

3.3.3 Resolution ..................................................................................3-18

3.3.4 Density .......................................................................................3-20

3.3.5 File Type ....................................................................................3-22

501/421/361 x-5

3.3.6 Background Removal ................................................................3-23

3.3.7 Scan Size ...................................................................................3-25

3.3.8 Original Settings ........................................................................3-26

3.4 Using a program ....................................................................... 3-29

3.5 Checking the destinations ....................................................... 3-31

4 Logging on and logging off

4.1 When a logon screen appears ................................................... 4-2

4.1.1 When the screen to enter the user name appears ......................4-2

4.1.2

When the screen to enter the account name and password appears 4-5

1Before use

501/421/361 1-2

Before use 1

1 Before use

1.1 Names of control panel parts and their functions

Note

For details, refer to the User’s Guide [Copy Operations], the User’s Guide

[Network Scan/Fax/Network Fax Operations].

No. Part name Description

1 Touch panel Displays various screens and messages.

Specify the various settings by directly touching the

panel.

2 Main Power indicator Lights up in green when the machine is turned on with

the main power switch.

3 Sub power switch Press to turn on/off machine operations. When turned

off, the machine enters a state where it conserves

energy.

4 [Mode Memory] key Programmed fax/scan settings can be recalled to be

used again. (See p. 3-29)

12 11 8

10 9

501/421/361 1-3

Before use 1

5 [Utility/Counter] key Press to display the Meter Count screen and the Utility

screen.

6 [Reset] key Press to clear all settings (except programmed settings)

entered in the control panel and touch panel.

7 [Stop] key Pressing the [Stop] key during an operation temporarily

stops the operation.

8 [Proof Copy] key Press to print a single proof copy to be checked before

printing a large number of copies. (See p. 2-34)

9 [Start] key Press to start the operation. When this machine is ready

to begin the operation, the indicator on the [Start] key

lights up in blue. If the indicator on the [Start] key lights

up in orange, the operation cannot begin.

Press to restart a stopped job.

10 Data indicator Flashes in blue while a print job or fax is being received.

Lights up in blue while a print job or fax is queued to be

printed or is being printed.

11 [C] (clear) key Press to clear a value (such as the number of copies, a

zoom ratio, or a size) entered using the keypad.

12 Keypad Use to type in the number of copies to be produced.

Use to type in the zoom ratio.

Use to type in the various settings.

13 [Enlarge Display] key Press to enter or exit Enlarge Display mode. If

authentication is performed with PageScope

Authentication Manager, it does not enter Enlarge

Display mode.

14 [Accessibility] key Press to display the screen for specifying settings for

user accessibility functions.

15 [Power Save] key Press to enter Low Power mode. While the machine is in

Low Power mode, the indicator on the [Power Save] key

lights up in green and the touch panel goes off. To

cancel Low Power mode, press the [Power Save] key

again.

16 [Access] key If user authentication or account track settings have

been applied, press this key after entering the user name

and password (for user authentication) or the account

name and password (for account track) in order to use

this machine.

17 Brightness dial Use to adjust the brightness of the touch panel.

18 [Fax/Scan] key Press to enter Fax/Scan mode.

While the machine is in Fax/Scan mode, the indicator on

the [Fax/Scan] key lights up in green.

19 [Copy] key Press to enter Copy mode. (As a default, the standard-

sized Copy mode screen is displayed.)

While the machine is in Copy mode, the indicator on the

[Copy] key lights up in green.

No. Part name Description

501/421/361 1-4

Before use 1

1.2 Adjusting the angle of the control panel

The control panel can be adjusted to either of three angles.

In addition, the control panel can be tilted to the left.

Adjust the control panel to the angle that allows for easy operation.

1.2.1 To adjust the angle of the control panel

1Pull the control panel release lever toward you to raise or lower the

control panel.

➀Upper position (base position)

➁Middle position

➂Lower position

➃Left tilt position

Andere Handbücher für bizhub 361

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Konica Minolta Multifunktionsdrucker Handbücher

Konica Minolta

Konica Minolta magicolor 4690MF Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub 215 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub 350 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub C284 Bedienungsanleitung

Konica Minolta

Konica Minolta BIZHUB C450P Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub C650 Series Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub 552 Bedienungsanleitung

Konica Minolta

Konica Minolta Magicolor 2590 MF Bedienungsanleitung

Konica Minolta

Konica Minolta PagePro 1380 MF Bedienungsanleitung

Konica Minolta

Konica Minolta Internet Fax 7145 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub C200 Bedienungsanleitung

Konica Minolta

Konica Minolta SC-215 Bedienungsanleitung

Konica Minolta

Konica Minolta Bizhub 362 Bedienungsanleitung

Konica Minolta

Konica Minolta Magicolor 2590 MF Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub C654 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub C552 Series Leitfaden

Konica Minolta

Konica Minolta Drypro 832 Bedienungsanleitung

Konica Minolta

Konica Minolta magicolor 2400W Bedienungsanleitung

Konica Minolta

Konica Minolta PAGEPRO 1480MF Montageanleitung

Konica Minolta

Konica Minolta bizhub 750 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub 200 Bedienungsanleitung

Konica Minolta

Konica Minolta Magicolor 2490 MF Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub 223 Bedienungsanleitung

Konica Minolta

Konica Minolta Di1811p Bedienungsanleitung

Beliebte Multifunktionsdrucker Handbücher anderer Marken

Triumph Adler

Triumph Adler DC 2016 Handbuch

Epson

Epson WorkForce WF-2510 Benutzerhandbuch

Epson

Epson Stylus Scan 2000 Installations- und Betriebshandbuch

Epson

Epson PictureMate Snap PM 240 Bedienungsanleitung

Brother

Brother MFC-J430w Bedienungsanleitung

Lexmark

Lexmark MX710 Series Handbuch

Brother

Brother MFC-9760 Bedienungsanleitung

Lexmark

Lexmark XC8155 Bedienungsanleitung

Lexmark

Lexmark X642E Bedienungsanleitung

Sharp

Sharp MX-2310U Leitfaden

Aficio

Aficio 200 Bedienungsanleitung

Canon

Canon ImageCLASS 2300 Handbuch

Ricoh

Ricoh Pro C900 Bedienungsanleitung

Lexmark

Lexmark X925 Bedienungsanleitung

Brother

Brother Business Smart MFC-J4510dw Bedienungsanleitung

Epson

Epson Stylus CX8400 Series Bedienungsanleitung

Oce

Oce VarioLink 5022 Bedienungsanleitung

Copystar

Copystar CS 4551ci Bedienungsanleitung

Konica Minolta bizhub 361 Gebrauchsanweisung

Beliebte Multifunktionsdrucker Handbücher anderer Marken