Konica Minolta Bizhub C350 Bedienungsanleitung

E-1

C350

4036-7762-04

INSTALLATION MANUAL

Applied Machine: C350

KONICA MINOLTA

BUSINESS TECHNOLOGIES, INC.

I.Outline of Installation Procedures for 4036 System

When installing the machine and associated options as a system, follow the order shown on the upper.

Caution:

• For the detailed installation procedures for each option, follow the instructions given in the corresponding

Installation Manual and perform the procedures correctly.

• Once the Power Switch is turned ON, do not turn OFF it until the installation work has been completed.

• Make available collective manpower of an appropriate size for transporting the machine. (Machine mass:

100 kg/229 lb)

✱Electron System Options

PC-101 PC-201 DK-501

DF-601

AD-501

JS-601

FS-501

WT-501

FS-601

OC-501

PK-501/PK-4/

PK-131

Copier/Printer Machine

HD-501

EM-301

PC-401

Dehumidifier Heater 1C

EK-501 VI-501

VK-501DT-105

Electron System Options

MC-501

IC-401

< Important >

Be sure to correctly follow the procedures in order as explained in this

Installation Manual.

If you do not follow the procedure in order, the image trouble may occur.

E-2

II. Accessory parts

* Varies depending on the applicable marketing area

III.Removing the Machine

1. Open the shipping carton and remove the IU car-

ton and machine carton.

2. Pull out the handles.

3. Holding onto the portions shown in the illustra-

tion, remove the machine while maintaining a

level position.

Caution:

Machine mass: 100 kg/229 lb

Make available collective manpower of an appro-

priate size for transporting the machine.

No. Name Q’ty

1. Imaging unit (IU): Y,M,C,BK 4

2. Power cord * 1

3. Cord clamp * 1

4. User’s Guide holder 1

5. User’s Guide 1

6. Enlarge Display Mode User’s Guide 1

7. Creative Image Book 1

8. Quick Guide (Printer Controller) 1

9. Quick Guide (PageScope Cabinet Pro) 1

10. Installation Manual (this manual) 1

11.

Installation Guide (for Printer Controller)

12. Warranty card * 1

13. Setup report * 1

14. End User Software License Agreement 1

15. URL customer registration * 1

16. Open SSL Statement 1

17. CD-ROM 3

18. Drawer label 1

19. Cap A (round-head) 2

20. Cap B (square-head) 2

21. Connector cover 1

22. Drawer cover 1

23. Mounting screw 2

24. Power cord instruction * 1

E-3

IV.Removing Protective Tape, Packing and

Other Shipping Materials

1. Remove protective tape from different parts of the

machine.

2. Remove the packing bracket.

3. Remove the protective sheet.

4. Slide out the 1st drawer and remove protective

tape and packing materials from the inside of the

drawer.

5. Slide out the 2nd drawer and remove protective

tape from the inside of the drawer.

E-4

V.Installing the IU

1. Open the front door.

2. Pinch the IU release lever for Y and pull it down

forward.

3. Tilt the IU to the left and, in that condition, shake

it over a small stroke twice. Then, tilt the IU to the

right and, in that condition, shake it over a small

stroke twice.

Caution:

When holding the IU, be sure to hold onto the blue

label portion.

4. Keeping the IU in the level position, insert it all

the way as far as it will go.

Caution:

When inserting the IU, make sure that the leading

edge of the IU is aligned with the mounting posi-

tion label indicated on the machine.

Make sure that the IU is inserted all the way into

the machine.

5. Holding the IU (indicated by the arrow in the illus-

tration), pull out the PC Drum protective sheet.

Caution:

Pull out the PC Drum protective sheet halfway,

and pull it down slantwise.

6. Push the IU release lever all the way until a click

is heard.

7. Using the same procedure, install all IUs.

E-5

VI.Charging Toner and Installing the Filter

Caution:

Toner does not come with the machine. Purchase

toner bottles (of different colors) separately avail-

able.

1. Open the front door.

2. Remove the desiccant. (only the black toner bot-

tle)

3. Holding the toner bottle firmly, shake it well verti-

cally and horizontally to agitate toner.

4. Remove the protective tape and the protective

cap.

5. Swing the fixing lever downward.

6. Load the toner bottle in position.

(Make sure that the gear is on the rear side.)

7. Swing the fixing lever upward to fix the toner bot-

tle in position.

* Make sure that the fixing lever is positively swung

into position.

8. Using the same procedure, install the toner bot-

tles for other colors of toner.

9. Take out the filter and install it in position.

Caution:

The filter is packed in the box of a black toner bot-

tle.

E-6

VII.Connecting the Power Cord and

Mounting the Accessories

1. Connect the power cord.

2. Remove the screw shown in the illustration.

3. Fit the cord clamp furnished with the machine

over the power cord. Then, secure the cord

clamp using the screw that has just been

removed.

Caution:

This step may not be performed depending on the

applicable marketing area.

4. Plug the power cord into the power outlet.

5. Attach the cap A and B enclosed with the

machine.

6. Attach the connector cover enclosed with the

machine.

VIII.Installing the User’s Guide Holder

Install the user’s guide holder.

E-7

IX.Adjusting Touch Panel

1. Turn on the Power Switch.

2. Call “Touch Panel Adjust” to the screen. (To dis-

play this function, press Stop → 0 → Stop → 3 on

the Control Panel.)

3. Using a ballpoint or similar device, lightly touch

the center of the + markers at four places on the

Touch Panel in order.

(Any specific marker can be the first one.)

4. Touch “END.”

X.Loading the Test Copy Paper

1. Load the 1st drawer with A3 or Ledger paper.

2. Place the media types selection dial in the “Plain”

position.

XI.Setting Gradation Adjust

1. Check that A3 or Ledger paper is loaded in the

drawer.

2. Display the Tech. Rep. Mode screen.

(For details of how to display the Tech. Rep.

Mode screen, see the service manual.)

3. Select “Gradation Adjust.”

4. Press the start key. A test pattern will then be pro-

duced on the A3 or Ledger paper.

5. Place the test pattern face down on the original

glass.

6. Place about ten sheets of A3 or Ledger paper on

the test pattern placed on the original glass.

Lower the original cover, if the machine is so

equipped.

7. Press the start key.

The machine will start reading the test pattern.

E-8

8. When the machine completes reading the test

pattern, the “Gradation Adjust” screen will reap-

pear.

9. Repeat steps from 4 through 7 to let the machine

read the test pattern three times.

10.Touch “END.”

11.Touch “Fin. Time.”

XII.Date & Time Setting

1. Select the Date & Time Setting function as fol-

lows: Utility →Admin. Mode →Input the Admin-

istrator Code →Admin. Set. 3/4 →Date & Time

Setting.

2. Select the item you want to set and press the

clear key.

3. Enter the data for the year, month, day, and time-

of-day from the 10-key pad.

4. Touch “Enter.”

5. Touch “Exit” three times.

6. Display the Date/Time Input screen.

(To display the Date/Time Input screen, press

Stop →1 →1 →4 →4 →Clear on the Control

Panel →Input the Service Code.)

7. Press the clear key.

8. Enter the data for the year, month, day, and time-

of-day from the 10-key pad.

9. Touch “Entry.”

Caution:

Touching the Entry key returns the figures in the

Date/Time Input screen to 0 and Date/Time Input

has been completed.

10.Touch “END.”

E-9

XIII.Serial # Input

1. Display the Tech. Rep. Mode screen.

(For details of how to display the Tech. Rep.

Mode screen, see the service manual.)

2. Select the Serial # Input function as follows:

System Input →Serial # Input.

3. Making sure that “Printer” is selected on the

screen, enter the serial number of the printer from

the 10-key pad.

4. Following the same procedure, enter the serial

numbers of all other units.

Caution:

Entering the serial number of the IR is not needed.

5. Touch “END.”

XIV.Unit Change

Caution:

This function allows the user to select the type of

message that will appear when the replacement

time arrives for each of the different units.

1. Display the Tech. Rep. Mode screen.

(For details of how to display the Tech. Rep.

Mode screen, see the service manual.)

2. Select the Unit Change function as follows:

System Input →Unit Change.

3. Select the appropriate message type for each

unit.

4. Touch “END.”

E-10

XV.List Output

1. Load the 1st drawer with A4L or Letter L paper.

2. Display the Tech. Rep. Mode screen.

(For details of how to display the Tech. Rep.

Mode screen, see the service manual.)

3. Select “List Output.”

4. Select “Image Processing.”

5. Press the start key.

Then, lists of various kinds will be produced.

6. Touch “END.”

7. Touch “Fin. Time.”

8. Turn “OFF/ON” the Power Switch.

XVI.Affixing the Drawer Labels

Affix the drawer label.

XVII.Adjusting Registration of Paper

Source Options

<PC-101, 401>

1. Display the Tech. Rep. Mode screen.

(For details of how to display the Tech. Rep.

Mode screen, see the service manual.)

2. Select the function to be used as follows:

Machine Adjust →PRT Area →Left Margin →

3rd.

3. Measure width A on the test pattern produced to

check to see if it falls within the specified range.

Specifications: 3.0 ± 1.0 mm

4. If the measured width falls outside the specified

range, adjust with “▼” or “▲” key and then make

the check again.

Drawer Label

Andere Handbücher für bizhub C350

Inhaltsverzeichnis

Andere Konica Minolta Multifunktionsdrucker Handbücher

Konica Minolta

Konica Minolta BIZHUB 500 Bedienungsanleitung

Konica Minolta

Konica Minolta BIZHUP C351 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub C754 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub C350 Bedienungsanleitung

Konica Minolta

Konica Minolta Printer/Fax/Scanner/Copier 250 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub press c7000 Bedienungsanleitung

Konica Minolta

Konica Minolta IC-203 Bedienungsanleitung

Konica Minolta

Konica Minolta magicolor 1690MF Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub C554 Bedienungsanleitung

Konica Minolta

Konica Minolta BizHub C352 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub 750 Gebrauchsanweisung

Konica Minolta

Konica Minolta magicolor 2400W Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub 28e Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub 554E Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub c3110 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub 250 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub FK-503 Bedienungsanleitung

Konica Minolta

Konica Minolta magicolor 4690MF Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub PRO 951 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub 360 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub C35 Bedienungsanleitung

Konica Minolta

Konica Minolta CF5001 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub C552 Series Leitfaden

Konica Minolta

Konica Minolta DI2510 Bedienungsanleitung

Beliebte Multifunktionsdrucker Handbücher anderer Marken

Triumph Adler

Triumph Adler DC 2016 Handbuch

Epson

Epson WorkForce WF-2510 Benutzerhandbuch

Epson

Epson Stylus Scan 2000 Installations- und Betriebshandbuch

Epson

Epson PictureMate Snap PM 240 Bedienungsanleitung

Brother

Brother MFC-J430w Bedienungsanleitung

Lexmark

Lexmark MX710 Series Handbuch

Brother

Brother MFC-9760 Bedienungsanleitung

Lexmark

Lexmark XC8155 Bedienungsanleitung

Lexmark

Lexmark X642E Bedienungsanleitung

Sharp

Sharp MX-2310U Leitfaden

Aficio

Aficio 200 Bedienungsanleitung

Canon

Canon ImageCLASS 2300 Handbuch

Ricoh

Ricoh Pro C900 Bedienungsanleitung

Lexmark

Lexmark X925 Bedienungsanleitung

Brother

Brother Business Smart MFC-J4510dw Bedienungsanleitung

Epson

Epson Stylus CX8400 Series Bedienungsanleitung

Oce

Oce VarioLink 5022 Bedienungsanleitung

Copystar

Copystar CS 4551ci Bedienungsanleitung