Konica Minolta BizHub C352 Bedienungsanleitung

E-1

INSTALLATION MANUAL

9J06-9621-01

Be sure to correctly follow the procedures in order as explained in this Installation Manual.

If you do not follow the procedure in order, the image trouble may occur.

I. Outline of Installation Procedures

When installing the machine and associated options as a system, follow the order shown on the upper.

Note:

• For the detailed installation procedures for each option, follow the instructions given in the corresponding

Installation Manual and perform the procedures correctly.

• When placing the machine on the floor, make sure to use the Paper Feed Cabinet or the Desk to secure

the performance and the quality of the product.

• Once the Power Switch is turned ON, do not turn OFF it until the installation work has been completed.

• Lifting the machine in an awkward position or transporting it in a poorly balanced position could result in

personal injury. When transporting the machine, assign an adequate number of persons to the job and

ensure that each person can take a good position of not being excessively loaded.

(mass: approx. 103 kg (227 lb))

FK-502

SA-501

EK-702

MK-706

DF-608

MT-501

WT-501

SD-503

✱Electron System Options

PC-103 PC-203 DK-502

Machine

PC-403

Dehumidifier Heater 1C

Electron System Options

OT-601

OC-501SP-501

FS-514 PK-510

ML-501

VK-501

FK-502

IC-406

VI-503

EM-309

SC-503

9J06IXC001DA

Applied Machine:

E-2

II. Installation Space (unit: mm (inch))

bizhub C352 + FS-514 + SD-503 + DF-608

+ PC-403

III. Pre-installation Check Items

1. Select a level and stable place for installing the

machine.

2. Be sure to use a power source of the voltage and

frequency indicated in the product specifications.

Ensure that the current carrying capacity of the

power outlet is at least equal to the current listed

in the product specifications.

3. Power the machine directly from a dedicated

power outlet. (Do not use an extension cord.)

4. Do not plug or unplug the power cord with wet or

dirty hands, otherwise you may get an electric

shock.

5. Avoid a hot and humid environment, or a place

exposed to direct sunlight.

6. Avoid a dusty location, or a place near volatile

and flammable substances.

7. Avoid a poorly ventilated place.

IV. Accessory parts

* Varies depending on the applicable marketing

area.

9J06IXC139DA

190

(7-1/2)

1212

(47-11/16)

341

(13-7/16)

394

(15-1/2)

755

(29-3/4)

100

(3-15/16)

1208

(47-9/16)

372

(14-5/8)

No. Name Q’ty

1. Imaging Unit (IU): Y,M,C,BK 4

2. User’s Guide Holder 1

3. User’s Guide (Copy Operations) 1

4. User’s Guide

(Network Scanner Operations) 1

5. User’s Guide (Box Operations) 1

6. User’s Guide (Fax Operations) 1

7. User’s Guide

(Enlarge Display Operations) 1

8. Quick Guide (Printer Controller) 1

9. Installation Manual 1 set

10. Drawer Label 1

11. Label (Legal Restrictions on Copying) * 1

12. Label (Super G3 Label) 1

13. Cap A (round-head) 2

14. Cap B (square-head) 2

15. Power Cord * 1

16. Cord Clamp * 1

17. Screw * 1

18. Connector Cover 1

19. Cover

(Mounted when

neither the Paper

Feed Cabinet nor

the Desk is

mounted.)

20. IR Left Cover

(For mounting the

Reverse

Automatic

Document

Feeder.)

21. Decorative Cover

(For mounting the

Reverse

Automatic

Document

Feeder.)

22. Power cord instruction * 1

23. CD-ROM * 4

24. Harness for the Dehumidifier Heater 1

9J06IXC029DA

9J06IXC027DA

9J06IXC028DA

E-3

Note:

• Keep the Harness for the Dehumidifier Heater

at hand. It is necessary for mounting the Dehu-

midifier Heater.

• Keep the IR left cover and Decorative cover at

hand. They are necessary for mounting the

Reverse Automatic Document Feeder.

• Keep the Label (Super G3 Label) at hand. It is

necessary for mounting the FAX Kit.

V. Removing the Machine

1. Open the shipping carton and remove the IU car-

ton and machine carton.

2. Pull out the handles.

3. Holding onto the portions shown in the illustra-

tion, remove the machine while maintaining a

level position.

Note:

Machine mass: 103 kg/227 lb

Make available collective manpower of an appro-

priate size for transporting the machine.

Install the Drawer Cover furnished with the Paper

Feed Cabinet (1 or 2 Way Paper Feed Cabinet)

first before attaching the machine to Paper Feed

Cabinet. (two screws furnished with the Paper

Feed Cabinet)

When attaching the machine, as the reference fit

the machine with the corner A and B of the Paper

Feed Cabinet.

After unpacking, be sure to get rid of the

packaging materials and keep them out of

the reach of children.

Putting the head in the plastic bag

involves danger of suffocation. 9J06IXC002DA

9J06IXC003DA

4061IXC119DA

Drawer Cover

E-4

VI. Removing Protective Tape, Packing

and Other Shipping Materials

1. Remove protective tape from different parts of the

machine.

2. Remove the packing bracket.

3. Remove the protective sheet.

4. Slide out the 1st drawer and remove protective

tape and packing materials from the inside of the

drawer.

5. Slide out the 2nd drawer and remove protective

tape from the inside of the drawer.

9J06IXC004DB

9J06IXE006DB

9J06IXC007DB

9J06IXC008DB

9J06IXC135DA

9J06IXC136DA

E-5

VII. Installing the IU

1. Open the front door.

2. Tilt the IU to the left and, in that condition, shake it

over a small stroke twice. Then, tilt the IU to the

right and, in that condition, shake it over a small

stroke twice.

Note:

Shake the IU adequately. Otherwise, it may cause

trouble.

3. Remove the top cap of the IU.

4. Keeping the IU in the level position, insert it all

the way as far as it will go.

Note:

• Make sure that the color is same between

inserting port and the IU.

• Make sure that the blue label position of the IU

is matched with the one of the machine side.

5. Lift up the IU handle and pull out the photo con-

ductor sheet slowly holding the IU.

6. Push the IU all the way in.

Note:

Make sure that the IU is pushed all the way in.

7. Using the same procedure, install all IUs.

9J06IXC009DA

4062MXC002HB

9J06IXC137DA

9J06IXC010DA

9J06IXC011DA

9J06IXC012DA

E-6

VIII. Installing the Toner Cartridge

Note:

Since cartridge is not furnished with the machine,

purchase toner cartridge (of different colors) sepa-

rately.

1. Shake the Toner Cartridge up and down five to

ten times.

Note:

Shake the cartridge adequately. Otherwise, it may

cause trouble.

2. Insert the toner cartridge into the machine.

Note:

• Make sure that the color is same between

inserting port and the toner cartridge.

• Make sure that the blue label position of the

toner cartridge is matched with the one of the

machine side.

3. Push the toner cartridge all the way in.

Note:

Make sure that the toner cartridge is pushed all the

way in.

4. Using the same procedure, install the toner car-

tridges for other colors of toner.

5. Close the front door.

6. Take out the filter and install it in position.

Note:

The filter is packed in the box of a black toner car-

tridge.

8938MXC003HA

9J06IXC013DA

9J06IXC014DA

9J06IXC015DA

9J06IXC138DA

E-7

IX. Connecting the Power Cord and

Mounting the Accessory parts

1. Connect the power cord.

2. Fit the cord clamp furnished with the machine

over the power cord (one screw furnished with

the machine).

Note:

This step may not be performed depending on the

applicable marketing area.

3. Plug the power cord into the power outlet.

4. Attach the cap A and B furnished with the

machine.

5. Attach the connector cover furnished with the

machine.

6. Install the cover furnished with the machine to the

machine at the location shown on the right.

Note:

This operation should be performed only when the

Paper Feed Cabinet and the Desk are not

mounted.

4038IXC028DA

9J06IXC025DA

C4004U139CA

9J06IXC016DB

9J06IXC017DA

9J06IXC018DA

E-8

X. Installing the User’s Guide Holder

Install the user’s guide holder.

XI. Mounting the Original Cover

Install the Original Cover.

XII. Adjusting Touch Panel

1. Turn ON the Main Power Switch and then Sub

Power Switch.

Note:

Turning power ON will display the screen below.

Ignore the message and proceed to the step 2.

2. Press the accessibility key.

3. Touch “Touch Panel Adj.”

4. Using a ballpoint or similar device, lightly touch

the center of the + markers at four places on the

Touch Panel.

(Any specific marker can be the first one.)

Note:

Pressing the touch panel hard may cause dam-

age.

* When all the markers at four places have been

touched, the start key turns green and lights up

steadily green.

5. Press the start key.

6. Touch “Close.”

4038IXC026DA

9J06IXC019DA

9J06IXE141DA

9J06IXE196DA

4037IXE530DA

E-9

XIII. Setting Gradation Adjust

1. Set that A3 or Ledger paper is loaded in

the drawer.

2. Display the Service Mode screen.

(For details of how to display the Service Mode

screen, see the service manual.)

3. Select “Imaging Process Adjustment.”

4. Touch “Gradation Adjust.”

5. Touch “High Compression Mode” and press the

start key.

A test pattern will then be produced on the A3

or Ledger paper.

6. Place the test pattern face down on the original

glass.

7. Place about ten sheets of A3 or Ledger

paper on the test pattern placed on the original

glass.

Lower the original cover, if the machine is so

equipped.

8. Press the start key.

The machine will start reading the test pattern.

9. When the machine completes reading the test

pattern, the “Gradation Adjust” screen will reap-

pear.

10. Repeat steps from 5 through 8 to let the

machine read the test pattern two times.

11. Touch “Gradation Mode” and press the start key.

A test pattern will then be produced on the

A3 or Ledger paper.

12. Place the test pattern face down on the original

glass.

9J06IXE073DA

4037IXE534DA

9J06IXC021DA

9J06IXC020DA

4037IXE532DA

9J06IXC022DA

E-10

13. Place about ten sheets of A3 or Ledger

paper on the test pattern placed on the original

glass.

Lower the original cover, if the machine is so

equipped.

14. Press the start key.

The machine will start reading the test pattern.

15. When the machine completes reading the test

pattern, the “Gradation Adjust” screen will reap-

pear.

16. Repeat steps from 11 through 14 to let the

machine read the test pattern two times.

17. Touch “Resolution Mode” and press the start

key.

A test pattern will then be produced on the

A3 or Ledger paper.

18. Place the test pattern face down on the original

glass.

19. Place about ten sheets of A3 or Ledger

paper on the test pattern placed on the original

glass.

Lower the original cover, if the machine is so

equipped.

20. Press the start key.

The machine will start reading the test pattern.

21. When the machine completes reading the test

pattern, the “Gradation Adjust” screen will reap-

pear.

22. Repeat steps from 17 through 20 to let the

machine read the test pattern two times.

23. Touch “END.”

9J06IXC020DA

4037IXE533DA

9J06IXC023DA

9J06IXC020DA

Andere Handbücher für BizHub C352

Inhaltsverzeichnis

Andere Konica Minolta Multifunktionsdrucker Handbücher

Konica Minolta

Konica Minolta BIZHUB C300 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub PRO 951 Bedienungsanleitung

Konica Minolta

Konica Minolta 7145 Montage- und Wartungsanleitung

Konica Minolta

Konica Minolta PagePro 1380 MF Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub C35P Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub C353 Series Bedienungsanleitung

Konica Minolta

Konica Minolta Bizhub C3850 Stücklistenhandbuch

Konica Minolta

Konica Minolta BIZHUB PRO 1050P Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub C360 Series Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub PRO C6000L Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub C450 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub 554E Bedienungsanleitung

Konica Minolta

Konica Minolta Bizhub 4020 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub C3350i Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub 36 Handbuch

Konica Minolta

Konica Minolta bizhub C650 Series Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub C280 Series Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub C550 Series Bedienungsanleitung

Konica Minolta

Konica Minolta BIZHUB 226 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub C650 Series Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub PRO C6000L Originalbetriebsanleitung

Konica Minolta

Konica Minolta bizhub C450 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub PRESS C6000 Originalbetriebsanleitung

Konica Minolta

Konica Minolta bizhub C224 Bedienungsanleitung

Beliebte Multifunktionsdrucker Handbücher anderer Marken

Triumph Adler

Triumph Adler DC 2016 Handbuch

Epson

Epson WorkForce WF-2510 Benutzerhandbuch

Epson

Epson Stylus Scan 2000 Installations- und Betriebshandbuch

Epson

Epson PictureMate Snap PM 240 Bedienungsanleitung

Brother

Brother MFC-J430w Bedienungsanleitung

Lexmark

Lexmark MX710 Series Handbuch

Brother

Brother MFC-9760 Bedienungsanleitung

Lexmark

Lexmark XC8155 Bedienungsanleitung

Lexmark

Lexmark X642E Bedienungsanleitung

Sharp

Sharp MX-2310U Leitfaden

Aficio

Aficio 200 Bedienungsanleitung

Canon

Canon ImageCLASS 2300 Handbuch

Ricoh

Ricoh Pro C900 Bedienungsanleitung

Lexmark

Lexmark X925 Bedienungsanleitung

Brother

Brother Business Smart MFC-J4510dw Bedienungsanleitung

Epson

Epson Stylus CX8400 Series Bedienungsanleitung

Oce

Oce VarioLink 5022 Bedienungsanleitung

Copystar

Copystar CS 4551ci Bedienungsanleitung