Konica Minolta Bizhub C650 Series Bedienungsanleitung

E-1

INSTALLATION MANUAL

A00H-9627-00

Be sure to correctly follow the procedures in order as explained in this Installation Manual.

If you do not follow the procedure in order, the image trouble may occur.

I. Outline of installation procedures

When installing the machine and associated options as a system, follow the order shown on the upper.

Note:

• For the detailed installation procedures for each option, follow the instructions given in the corresponding

installation manual and perform the procedures correctly.

• Once the Power Switch is turned ON, do not turn OFF it until the installation work has been completed.

• When transporting the machine, assign an adequate number of persons to the job and follow the speci-

fied correct procedures.

(mass: approx. 190 kg (418-3/4 lb))

OT-503

Machine

Electron system options

DF-610SP-501

IC-409*

EK-602*

✱Electron system options

ML-501 FK-502

SC-503*

FK-502*

WT-502

AU-201

FS-517 FS-608

PK-512 PK-513

LU-301

* : No particular order in installation procedures.

AU-101

PI-503

A00HIXC003DA

Applied Machine:

E-2

II. Installation space (unit: mm (inch))

bizhub C650 + FS-608 + DF-610 + LU-301

III. Pre-installation check items

1. Select a level and stable place for installing the

machine.

2. Be sure to use a power source of the voltage and

frequency indicated in the product specifications.

Ensure that the current carrying capacity of the

power outlet is at least equal to the current listed

in the product specifications.

3. Power the machine directly from a dedicated

power outlet. (Do not use an extension cord.)

4. Do not plug or unplug the power cord with wet or

dirty hands, otherwise you may get an electric

shock.

5. Avoid a hot and humid environment, or a place

exposed to direct sunlight.

6. Avoid a dusty location, or a place near volatile

and flammable substances.

7. Avoid a poorly ventilated place.

IV. Accessory parts

* Varies depending on the applicable marketing

area.

Note:

Keep the label (Super G3 label) at hand. It is nec-

essary for mounting the FAX Kit.

A00HIXC004DA

2151 (84-11/16)

806

(31-11/16)

391

(15-3/8)

1130

(44-7/16)

(2)

1155

(45-7/16)

494

(19-7/16)

387

(15-3/16)

806

(31-11/16)

958

(37-11/16)

1571 (61-7/8)

1649 (64-15/16)

No. Name Q’ty

1. Imaging unit (IU): Y,M,C,K 4

2. User’s guide holder 1

3. User’s guide

(Enlarge display operations) 1

4. Quick guide (Printer controller) 1

5. Quick guide

(Copy/Fax/Scan/Box operations) * 1

6. Installation manual 1 set

7. CD-ROM * 4

8. Tray label 1

9. Paper size label 1

10. Label (Legal restrictions on copying) * 1

11. Label (Super G3 label) 1

12. Cap A (round-head) 2

13. Cap B (square-head) 2

14. Power cord * 1

15. Connector cover 1

16. Cover 4

17. Spacer A 1

18. Spacer B 1

19. Power cord instruction * 1

After unpacking, be sure to get rid of the

packaging materials and keep them out of

the reach of children.

Putting the head in the plastic bag

involves danger of suffocation.

E-3

V. Unpacking the machine

1. Open the shipping box and take out the IU ship-

ping box and packaging material.

Note:

• Save the slope and cushion removed here for

later use.

• When storing or moving the IU, be sure to face

the TOP side up.

2. Separate the cushion into two and install them to

the pallet (at two places).

3. Take out the slope and protective tape and

remove nails from the plastic bag.

4. Position the slope as illustrated and drive nails in

to fix the slope in position.

5. Remove the mounting brackets (two each on the

right and left side) from the machine.

Note:

To remove the mounting brackets, use the allen

wrench on the machine side and a spanner on the

pallet side.

6. Holding onto the front cover and the back panel

of the machine, slide the machine down along the

slope.

Note:

Machine mass: 190 kg (418-3/4 lb)

• Perform this step on a level, stable site and

assign an adequate number of persons.

• When sliding the machine down, do not hold

onto the IR portion.

• Do not insert your leg under the slope.

A00JIXC001DB

Cushion

Slope

A00JIXC002DB

A00JIXC003DA

A00JIXC004DB

A00JIXC005DB

A00JIXC006DC

E-4

VI. Removing protective tape, packing and

other shipping materials

1. Remove protective tape from different parts of the

machine.

Note:

After removing protective tape B, be sure to lock

the lever.

2. Remove the packing bracket.

3. Remove the protective sheet.

4. Pull the tray 1 out and remove the protective tape

from the tray.

A00JIXC007DD

A00JIXC008DC

A00JIXC214DA

A00JIXC009DA

A00JIXC010DA

A00JIXC011DA

E-5

5. Pull the tray 2 out and remove the protective tape

from the tray.

6. Pull the tray 3 and 4 out and remove the protec-

tive tape from the tray.

VII. Installing the IU

1. Open the lower front door.

2. Remove the waste toner box fixing lever and the

waste toner box.

3. Tilt the IU to the right and, in that condition, shake

it over a small stroke twice. Then, tilt the IU to the

left and, in that condition, shake it over a small

stroke twice.

Note:

• Perform this step only for the color IU (Y, M,

and C).

• Shake the IU adequately. Otherwise, it may

cause trouble.

A00JIXC012DB

A00JIXC013DB

A00JIXC015DA

A00JIXC016DB

A00JIXC028DB

E-6

4. Remove protective tape of the IU.

5. Remove the protective sheet.

6. Unlock the IU fixing lever.

7. Keeping the IU in the level position, insert it all

the way as far as it will go.

Note:

Make sure that the color is same between insert-

ing port and the IU.

8. Push the IU all the way in.

Note:

Make sure that the IU is pushed all the way in.

9. Fix the IU in position using the IU fixing lever.

A00JIXC228DA

A00JIXC030DC

Protective sheet

A00JIXC031DA

A00JIXC032DC

A00JIXC033DB

A00JIXC034DB

E-7

10. Using the same procedure, install all IUs.

Note:

• Only for the IU (K), remove caps from the front

and rear ends.

• Do not shake the IU (K) at installation.

11. Reinstall the waste toner box which has been

removed in step 2.

12. Close the lower front door.

VIII. Installing the toner cartridge

Note:

Since cartridge is not furnished with the machine,

purchase toner cartridge (of different colors) sepa-

rately.

1. Open the upper front door.

2. Shake the toner cartridge up and down five to ten

times.

Note:

Shake the cartridge adequately. Otherwise, it may

cause trouble.

3. Remove protective tape of the toner cartridge.

A00JIXC029DB

A00JIXC017DA

A00JIXC018DA

A00JIXC224DA

E-8

4. Insert the toner cartridge into the machine.

Note:

Make sure that the color is same between insert-

ing port and the toner cartridge.

5. Push the toner cartridge all the way in.

Note:

Make sure that the toner cartridge is pushed all the

way in.

6. Using the same procedure, install the toner car-

tridges for other colors of toner.

7. Close the upper front door.

IX. Connecting the power cord and

mounting the accessory parts

1. Connect the power cord.

2. Plug the power cord into the power outlet.

3. To remove moisture from the paper in the tray,

turn ON the switch shown in the illustration.

A00JIXC019DA

A00JIXC139DA

A00JIXE211DA

C4004U139CA

A00KIXE010DA

Switch

E-9

4. Attach the cap A and B furnished with the

machine.

5. Attach the connector cover furnished with the

machine.

6. Install the cover furnished with the machine (two

each on the right and left side).

7. Install the spacer A furnished with the machine.

8. Install the spacer B furnished with the machine.

X. Installing the user’s guide holder

Install the user’s guide holder.

A00JIXC020DA

A00JIXC021DA

A00JIXC136DA

A00JIXC022DA

A00JIXC137DB

A00JIXC138DA

E-10

XI. Adjusting touch panel

1. Turn ON the Main Power Switch and then Sub

Power Switch.

2. Press the accessibility key.

3. Touch “Touch Panel Adjustment.”

4. Using a ballpoint or similar device, lightly touch

the center of the + markers at four places on the

touch panel.

(Any specific marker can be the first one.)

Note:

Pressing the touch panel hard may cause dam-

age.

* When all the markers at four places have been

touched, the start key turns blue and lights up

steadily blue.

5. Press the start key.

6. Touch “Close.”

XII. Setting gradation adjust

1. Set that A3 or Ledger paper is loaded in

the tray.

2. Display the Service Mode screen.

(For details of how to display the Service Mode

screen, see the service manual.)

3. Touch “Imaging Process Adjustment.”

4. Touch “Gradation Adjust.”

5. Touch “Stabilizer” and press the start key.

* When the start key lights up blue, go to step 6.

Note:

When a maintenance call occurs, see the service

manual.

6. Touch “High Compression Mode” and press the

start key.

A test pattern will then be produced on the A3

or Ledger paper.

A00JIXE182DB

A00JIXE183DA

A00JIXE184DA

A00JIXE195DA

A00JIXE185DA

Andere Handbücher für bizhub C650 Series

Inhaltsverzeichnis

Andere Konica Minolta Multifunktionsdrucker Handbücher

Konica Minolta

Konica Minolta Drypro 832 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub 161f Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub C450 Bedienungsanleitung

Konica Minolta

Konica Minolta BIZHUB 164 Bedienungsanleitung

Konica Minolta

Konica Minolta BIZHUB 500 Bedienungsanleitung

Konica Minolta

Konica Minolta accuriopress c6100 Originalbetriebsanleitung

Konica Minolta

Konica Minolta bizhub 750 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub 181 Bedienungsanleitung

Konica Minolta

Konica Minolta BIZHUB C252 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub C650 Series Bedienungsanleitung

Konica Minolta

Konica Minolta BIZHUB 420 Bedienungsanleitung

Konica Minolta

Konica Minolta BIZHUB PRO 1050 Bedienungsanleitung

Konica Minolta

Konica Minolta 7045 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub C652 Series Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub C360 Series Bedienungsanleitung

Konica Minolta

Konica Minolta magicolor 8650 Bedienungsanleitung

Konica Minolta

Konica Minolta magicolor 1690MF Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub C3350i Bedienungsanleitung

Konica Minolta

Konica Minolta A0HF011 Bedienungsanleitung

Konica Minolta

Konica Minolta Magicolor 1680MF Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub C654 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub C450 Bedienungsanleitung

Konica Minolta

Konica Minolta 7145 Montage- und Wartungsanleitung

Konica Minolta

Konica Minolta bizhub 601 Bedienungsanleitung

Beliebte Multifunktionsdrucker Handbücher anderer Marken

Triumph Adler

Triumph Adler DC 2016 Handbuch

Epson

Epson WorkForce WF-2510 Benutzerhandbuch

Epson

Epson Stylus Scan 2000 Installations- und Betriebshandbuch

Epson

Epson PictureMate Snap PM 240 Bedienungsanleitung

Brother

Brother MFC-J430w Bedienungsanleitung

Lexmark

Lexmark MX710 Series Handbuch

Brother

Brother MFC-9760 Bedienungsanleitung

Lexmark

Lexmark XC8155 Bedienungsanleitung

Lexmark

Lexmark X642E Bedienungsanleitung

Sharp

Sharp MX-2310U Leitfaden

Aficio

Aficio 200 Bedienungsanleitung

Canon

Canon ImageCLASS 2300 Handbuch

Ricoh

Ricoh Pro C900 Bedienungsanleitung

Lexmark

Lexmark X925 Bedienungsanleitung

Brother

Brother Business Smart MFC-J4510dw Bedienungsanleitung

Epson

Epson Stylus CX8400 Series Bedienungsanleitung

Oce

Oce VarioLink 5022 Bedienungsanleitung

Copystar

Copystar CS 4551ci Bedienungsanleitung