Konica Minolta Bizhub C650 Series Bedienungsanleitung

Hard Disk Drive Security

Enabling bizhub HDD Security Features

bizhub C650/C550/C451

bizhub C353/C253/C203

bizhub 501/421/361

bizhub 751/601

1 Enabling bizhub HDD Security - Overview

This guide is intended to assist the bizhub Multi-Function Printer (MFP) Administrator with the steps and

procedures necessary to ensure that the appropriate HDD Security Features are enabled and functioning.

The process and procedure involved in setting up or enabling the HDD Security Functions of a typical

bizhub MFP are outlined as follows;

The first step in MFP security is changing the default Administrator Password to a secure password,

an AlphaNumeric password is highly recommended (no spaces).

Next, it is very critical that the user not forget any of the passwords created using this guide. Some of

the passwords created in this guide will require a service technician, replacement parts and significant

cost and down time to be corrected.

 If the Administrator Password is forgotten, it must be set again by the Service Engineer. Contact

your Technical Representative.

If the MFP in question is being installed for the first time or has been previously sanitized;

•Enable the Encryption Key Setting. See Section 2

•Enable Overwrite Temporary Data. See Section 3

•Enable HDD Lock Password. See Section 4

•Enable User Box/Secure Box Auto Deletion Settings. See Section 5

•Enable Overwrite All HDD Data – End of Life HDD Sanitization. See Appendix A

If the MFP is currently running and has stored information, addresses, on-touch locations, etc already in

use the following is recommended;

•It is highly recommended to back up the HDD using the Konica Minolta HDD Backup Utility

application. See Appendix B

•Enable the Encryption Key Setting. See Section 2

•Enable Overwrite Temporary Data. See Section 3

•Enable HDD Lock Password. See Section 4

•Enable User Box/Secure Box Auto Deletion Settings. See Section 5

•Enable Overwrite All HDD Data – End of Life HDD Sanitization. See Appendix A

•Re-install the HDD Back copy of the MFP

Important Items to Remember…



Do not leave or walk away from the machine when Administrator Settings screen is open and on the

display. If it is absolutely necessary to leave the machine, be sure first to log off from the Administrator

Settings.

 Do not set any number that can easily be guessed from birthdays, employee identification numbers,

and the like for the Encryption Key/Passwords. Try to change the Encryption Key/Passwords at regular

intervals.

 Make sure that nobody but the Administrator of the machine comes to know the Encryption

Key/Passwords.

2 Enabling the Encryption Key Setting

The supported MFP models in this guide can have the HDD Encryption Kit as an optional accessory.

This accessory must be installed and enabled by a service technician prior to following the steps

outlined in this section. This section will demonstrate the steps necessary to enable or change the

Encryption Key. These settings can be completed by the MFP Administrator a service technician is

not required.

Setting the Encryption Key (Encrypting the HDD)

1 Enter the Administrator Mode on the MFP display, Utility/Counter button > Administrator

Settings > Input Admin Password > Security Settings.

2 Touch [HDD Settings].

3 Touch [HDD Encryption Setting].

A confirmation message appears. Select [Yes] and touch [OK].

5 Encryption Key, enter the Encryption Key again in [Encryption

Enter the new 20-digit Encryption Key from the keyboard and keypad.

To prevent entry of a wrong

Passphrase Confirmation].

Key

 To go back to the HDD Settings screen Touch [Cancel].

6 

 at tells that there is a

mismatch in the Encryption Keys. Enter the correct Encryption Key.



board Operation Notes:



To clear all characters Press the [C] key.

 To delete the last character entered Touch [Delete].

 To show the upper case/symbol screen Touch [Shift].

Touch [OK], Re-Enter the Encryption Key and Touch [OK].

If the Encryption Key entered does not meet the requirements of the Password Rules, a

ssage appears that tells that the Encryption Key entered cannot be used. E

me nter the

correct Encryption Key. For details of the Password Rules, see Appendix C.

If there is a mismatch in the Encryption Keys, a message appears th

Make d then ON the main power

switch. Now, turn OFF and then turn ON the main power switch.

When the main power switch is turned off, then on again, wait at least 10 seconds to turn it

on after turning it off. if there is no wait period between turning the main power switch off,

sure that a message appears prompting you to turn OFF an

then on again, the machine may not function properly. Here is the sequence, through which

the main power switch and sub power switch are turned on and off:

Turn off the sub power switch >

Turn off the main power switch

switch

Turn on the sub power switch rn on the main power

8 T

he following screen appears after the machine has been restarted.

de on the MFP display, Utility/Counter button > Administrator Settings

9 Enter the Administrator Mo

> Input Admin Password > HDD Encryption Settings.

Touch [HDD Format].

A confirmation message appears. Select [Yes] and touch [OK].



witch are turned on and off: rn on the main power

Make sure that a message appears prompting you to turn OFF and then ON the main power

switch. Now, turn OFF and then turn ON the main power switch.

When the main power switch is turned off, then on again, wait at least 10 seconds to turn it

on after turning it off. if there is no wait period between turning the main power switch off,

then on again, the machine may not function properly. Here is the sequence, through which

the main power switch and sub power s

Turn off the sub power switch >

Turn off the main power switch

switch

Turn on the sub power switch

dit

The Encryption Key can be cancelled or released at any time by the Administrator using the

ase Button.

Settings > Input Admin Password > HDD Settings > HDD Encryption Settings.

2 nd keypad.

anging the Encryption Key

 The Encryption Key can be changed or modified at any time by the Administrator using the E

Button.

Rele

1 Enter the Administrator Mode on the MFP display, Utility/Counter button > Administrato

Enter the currently registered 20-digit Encryption Key from the keyboard a

Key

To show the upper case/symbol screen Touch [Shift].

DD Settings screen Touch [Cancel].

3 Sel hat tells that there is a

mismatch in the Encryption Keys. Enter the correct Encryption Key.

o prevent entry of a wrong Encryption Key, enter the Encryption Key again in [Encryption

firmation].

5 Tou

ndix C.

 If there is a mismatch in the Encryption Keys, a message appears that tells that there is a

mismatch in the Encryption Keys. Enter the correct Encryption Key.

board Operation Notes:

 To clear all characters Press the [C] key.

 To delete the last character entered Touch [Delete].



 To go back to the H

ect [Edit] and touch [OK].

 If there is a mismatch in the Encryption Keys, a message appears t

4 Enter the new 20-digit Encryption Key from the keyboard and keypad.

Passphrase Con

ch [OK].

the Encryption Key entered does not meet the requirements of the Password Ru

 If les, a

message appears that tells that the Encryption Key entered cannot be used. Enter the

correct Encryption Key. For details of the Password Rules, see Appe

Keyboard Operation Notes:

 To clear all characters Press the [C] key.

 To delete the last character entered Touch [Delete].

 To show the upper case/symbol screen Touch [Shift].

 To go back to the HDD Settings screen Touch [Cancel].

6 Touch [OK], Re-Enter the Encryption Key and Touch [OK].

 If the Encryption Key entered does not meet the requirements of the Password Rules, a

message appears that tells that the Encryption Key entered cannot be used. Enter the

correct Encryption Key. For details of the Password Rules, see Appendix C.

 If there is a mismatch in the Encryption Keys, a message appears that tells that there is a

mismatch in the Encryption Keys. Enter the correct Encryption Key.

7 Make sure that a message appears prompting you to turn OFF and then ON the main power

switch. Now, turn OFF and then turn ON the main power switch.

 When the main power switch is turned off, then on again, wait at least 10 seconds to turn it

on after turning it off. if there is no wait period between turning the main power switch off,

then on again, the machine may not function properly. Here is the sequence, through which

the main power switch and sub power switch are turned on and off:

Turn off the sub power switch >

Turn off the main power switch

Turn on the main power

switch

Turn on the sub power switch

8 The following screen appears after the machine has been restarted.

9 Enter the Administrator Mode on the MFP display, Utility/Counter button > Administrator Settings

> Input Admin Password > HDD Encryption Settings.

10 Touch [HDD Format].

11 A confirmation message appears. Select [Yes] and touch [OK].

12 Make sure that a message appears prompting you to turn OFF and then ON the main power

on after turning it off. if there is no wait period between turning the main power switch off,

switch. Now, turn OFF and then turn ON the main power switch.

 When the main power switch is turned off, then on again, wait at least 10 seconds to turn i

then on again, the machine may not function properly. Here is the sequence, through which

the main power switch and sub power switch are turned on and off:

Turn off the sub power switch >

Turn off the main power switch

Turn on the main power

switch

Turn on the sub power switch

Andere Handbücher für bizhub C650 Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Konica Minolta Multifunktionsdrucker Handbücher

Konica Minolta

Konica Minolta bizhub pro 1100 Installationshandbuch

Konica Minolta

Konica Minolta bizhub C203 Series Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub 350 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub 36 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub C368 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub C280 Series Bedienungsanleitung

Konica Minolta

Konica Minolta BIZHUB C250 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub PRO 951 Bedienungsanleitung

Konica Minolta

Konica Minolta Di35I0 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub C452 Series Gebrauchsanweisung

Konica Minolta

Konica Minolta Internet Fax 7145 Bedienungsanleitung

Konica Minolta

Konica Minolta DI2510 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub 160 Bedienungsanleitung

Konica Minolta

Konica Minolta IC-206 Bedienungsanleitung

Konica Minolta

Konica Minolta Bizhub C3350 Bedienungsanleitung

Konica Minolta

Konica Minolta Di1610 Bedienungsanleitung

Konica Minolta

Konica Minolta magicolor 1690MF Bedienungsanleitung

Konica Minolta

Konica Minolta Magicolor 2590 MF Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub 250 Bedienungsanleitung

Konica Minolta

Konica Minolta FK-502 Bedienungsanleitung

Konica Minolta

Konica Minolta Bizhub 362 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub C450 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub 223 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub 361 Bedienungsanleitung

Beliebte Multifunktionsdrucker Handbücher anderer Marken

Triumph Adler

Triumph Adler DC 2016 Handbuch

Epson

Epson WorkForce WF-2510 Benutzerhandbuch

Epson

Epson Stylus Scan 2000 Installations- und Betriebshandbuch

Epson

Epson PictureMate Snap PM 240 Bedienungsanleitung

Brother

Brother MFC-J430w Bedienungsanleitung

Lexmark

Lexmark MX710 Series Handbuch

Brother

Brother MFC-9760 Bedienungsanleitung

Lexmark

Lexmark XC8155 Bedienungsanleitung

Lexmark

Lexmark X642E Bedienungsanleitung

Sharp

Sharp MX-2310U Leitfaden

Aficio

Aficio 200 Bedienungsanleitung

Canon

Canon ImageCLASS 2300 Handbuch

Ricoh

Ricoh Pro C900 Bedienungsanleitung

Lexmark

Lexmark X925 Bedienungsanleitung

Brother

Brother Business Smart MFC-J4510dw Bedienungsanleitung

Epson

Epson Stylus CX8400 Series Bedienungsanleitung

Oce

Oce VarioLink 5022 Bedienungsanleitung

Copystar

Copystar CS 4551ci Bedienungsanleitung

Konica Minolta bizhub C650 Series Bedienungsanleitung

Beliebte Multifunktionsdrucker Handbücher anderer Marken