Konica Minolta Bizhub C750i Bedienungsanleitung

INSTALLATION MANUAL

Applied Machines:

[Important]

Be sure to correctly follow the procedures in order as explained in this Installation Manual.

If you do not follow the procedure in order, the image trouble may occur.

E-12020. 9 Printed in Malaysia ACKN-9601-01

1. Outline of installation procedures

FK-515* MK-742*

MK-734

*:Varies depending on the

applicable marketing area.

AU-102

AU-201S

FK-514

SC-509

MK-735

SP-501

KP-102

KH-102

HT-509

TK-101

EK-608EK-609

WT-506WT-519

MK-730

CU-102

LU-205

LU-303

VI-516

IC-420

FS-539(SD) FS-540(SD)

PK-524 ZU-609

PK-526

PI-507 JS-602

RU-519

OT-514

UK-221

EM-908

Main body

When installing the main body and associated options as a system, follow the order shown on the upper.

CAUTION

Main body mass: approx. 160 kg (352-3/4 lb)

• Lifting the main body in an awkward position or transporting it in a poorly bal-

anced position could result in personal injury. When transporting the main

body, assign an adequate number of persons to the job and ensure that each

person can take a good position of not being excessively loaded.

Note:

• For the detailed installation procedures for each option, follow the instructions given in the correspond-

ing installation manual and perform the procedures correctly.

• Once the Power Switch is turned ON, do not turn OFF it until the installation work has been completed.

E-2

2. Installation space

(Unit: mm (inch))

bizhub C750i + FS-540SD + LU-205

615

(24-3/16)

781

(30-3/4)

467.5

(18-3/8)

875.5

(34-7/16)

322

(12-11/16)

774.5

(30-1/2)

2492.5 (98-1/8)

1343 (52-7/8)

1560.5 (61-7/16)

1207

(47-1/2)

353.5

(13-15/16)

3. Pre-installation check items

(1) Select a level and stable place for installing the

machine.

(2) Be sure to use a power source of the voltage

and frequency indicated in the product specifi-

cations. Ensure that the current carrying ca-

pacity of the power outlet is at least equal to

the current listed in the product specifications.

(3) Power the machine directly from a dedicated

power outlet. (Do not use an extension cord.)

(4) Do not plug or unplug the power cord with wet

or dirty hands, otherwise you may get an elec-

tric shock.

(5) Avoid a hot and humid environment, or a place

exposed to direct sunlight.

(6) Avoid a dusty location, or a place near volatile

and flammable substances.

(7) Avoid a poorly ventilated place.

4. Notes on using touch panel

Be sure to instruct users on the following points.

• This machine uses a capacitive touch panel.

When you touch the touch panel, use your finger

or the stylus pen supplied with the machine.

If you touch the panel using your nail or a pen tip

instead of using your finger or the stylus pen, the

touch panel does not respond normally.

• Pressing the touch panel hard may cause dam-

age.

• Do not strongly press the panel or press it using

the sharp tip of mechanical pencils.

• The key is a finger tapping (quick light touch us-

ing a finger) operation.

Note:

If you proceed to install the Expanded Memory

Unit EM-908, install it before the setup of the main

body.

E-3

5. Accessory parts

No. Name Shape Q’ty

1. Installation

manual

1 set

2. Quick guide 1

3. User’s guide

CD *1

4. DVD *1 1

5. Paper size la-

bel *2

6. NFC label 1

7. Duct cover 1

8. User’s guide

holder

9. Cap 4

10. Scanner cover 1

11. Stylus pen 1

No. Name Shape Q’ty

12. Waste toner

box

13. Leg assy 4

14. Chart 1

15. Cable clamp

(large)

16. Cable clamp

(small) *1

17. Screw A (3 x 8

mm)

18. Screw B (3 x

10 mm)

19. Screw C (3 x

30 mm) *1

*1 Varies depending on the applicable marketing

area.

*2 Keep the paper size label at hand. It is also nec-

essary for mounting the Large Capacity Unit

LU-303.

WARNING

Keep this bag away from babies and chil-

dren. Do not use in cribs, beds, carriages,

or playpens.

The thin film may cling to nose and mouth

and prevent breathing. This bag is not a

toy.

E-4

WARNING

If a power cord is not supplied, use only

the power cord that meets the following

conditions.

Failure to do this could result in a fire or

electrical shock.

• The power cord has voltage and current

rating appropriate for the rating plate on

this machine.

• The power cord meets regulatory re-

quirements for the area.

• The power cord is provided with

grounding pin/terminal.

* Power supply: 120V 16A, 220-240V 10A

Note:

• This manual provides the illustrations of the

accessory parts and machine that may be

slightly different in shape from yours. In that

case, instead of the illustrations, use the ap-

pearance of your machine to follow the instal-

lation procedure.

This does not cause any significant change or

problem with the procedure.

• If none of the later steps instruct you to use the

parts including screw and cover that you re-

moved following the instructions described in

this manual, discard them.

E-5

6. Precautions on transporting the main

body

Do not lift the machine by holding the handle. Be sure to secure the four handles with the supplied screws B

after installation.

CAUTION

Be sure to secure handles. If you accidentally hold the handle and lift the ma-

chine, resulting in an injury.

E-6

7. Unpacking the main body

Whether the slope is supplied with the main body or

not depends on your marketing areas. Follow the

notes below.

Note:

• When the slope is supplied with the main

body, perform the procedures in “How to use

the supplied slope} E-6”.

• When the slope is not supplied with the main

body, perform the procedures in “How to use

the jig slope} E-8”.

■ How to use the supplied slope

(1) Open the shipping box and remove the pack-

aging materials.

Note:

The supplied slope removed in this step is for

later use.

Supplied slope

(2) Hold onto the handle of the main body and tilt

the main body to the right and left. Under this

condition, remove the fixing materials.

(3) Pull out the tray 1 from the main body and re-

move the accessory parts.

Note:

The nails removed in this step are used later to

hold the slope in place.

Nail

E-7

(4) Remove each one set of cushions from the

trays 3 and 4 of the main body.

(5) Separate the cushion into two and install them

to the pallet (at two places).

(6) Position the slope as illustrated and insert the

nails into the holes to fix the slope in position.

Nail

(7) Holding the four handles at the right and left of

the main body, slide the main body down along

the slope.

CAUTION

Main body mass: approx. 160 kg (352-3/4

lb)

• Perform this step on a level, stable site

and assign an adequate number of per-

sons.

• When sliding the main body down, do

not hold onto the scanner portion.

• Do not insert your leg under the slope.

E-8

■ How to use the jig slope

(1) Open the shipping box and remove the pack-

aging materials.

Note:

Do not use the corrugated cardboard as the

slope.

Corrugated cardboard

(2) Hold onto the handle of the main body and tilt

the main body to the right and left. Under this

condition, remove the fixing materials.

(3) Pull out the tray 1 and remove the accessory

parts.

Nail

(4) Position the slope as illustrated and insert the

nails into the holes to fix the slope in position.

CAUTION

Make sure that the nails are inserted com-

pletely into the holes and the slope is held

in place.

Note:

Since the slope is not supplied with the machine,

prepare a jig slope.

Nail

E-9

(5) Holding the four handles at the right and left of

the main body, slide the main body down along

the slope.

CAUTION

Main body mass: approx. 160 kg (352-3/4

lb)

• Perform this step on a level, stable site

and assign an adequate number of per-

sons.

• When sliding the main body down, do

not hold onto the scanner portion.

• Do not insert your leg under the slope.

8. Removing protective tape, packing and

other shipping materials

(1) Remove the reinforcement bracket at the left

side of the main body. (Three screws)

(2) Remove the protective tape and the protective

materials.

Note:

Be sure to lock the lever after removing the pro-

tective tape A.

E-10

(3) Open the right door and remove the protective

sheet and the locking materials.

Note:

• After removing the locking materials, make

sure that the transfer roller assembly is se-

cured in place. In the case of <NG>, press the

transfer roller assembly into place so that it is

secured as shown in <OK>.

• Save the packaging materials removed in this

and subsequent steps for later use when

transporting the machine.

(4) Close the right door.

(5) Slide out the tray 1.

(6) Remove the protective tape from the tray 1.

Note:

See the User’s Guide for instructions on setting

paper in each tray and configuring the paper

types.

(7) Slide out the tray 2 and remove the tray locking

materials.

(8) Remove the protective tapes from the inside of

the tray 2 and remove accessory parts.

(9) Slide out the tray 3 and remove the protective

tape and protective material.

(10) Remove the desiccant and the locking screw

from the tray 3.

Inhaltsverzeichnis

Andere Konica Minolta Multifunktionsdrucker Handbücher

Konica Minolta

Konica Minolta DI2510 Bedienungsanleitung

Konica Minolta

Konica Minolta 7020 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub 654e Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub PRO C5501 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub C220 Series Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub C360 Series Bedienungsanleitung

Konica Minolta

Konica Minolta 7272 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub C3300i Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub C350 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub C654 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub C280 Series Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub 40p Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub C25 Bedienungsanleitung

Konica Minolta

Konica Minolta BIZHUB C250 Bedienungsanleitung

Konica Minolta

Konica Minolta BIZHUB 500 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub 423 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub 554E Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub250 Bedienungsanleitung

Konica Minolta

Konica Minolta 7020 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub C452 Series Leitfaden

Konica Minolta

Konica Minolta bizhub C35P Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub 552 Leitfaden

Konica Minolta

Konica Minolta bizhub C280 Series Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub C550 Series Bedienungsanleitung

Beliebte Multifunktionsdrucker Handbücher anderer Marken

Triumph Adler

Triumph Adler DC 2016 Handbuch

Epson

Epson WorkForce WF-2510 Benutzerhandbuch

Epson

Epson Stylus Scan 2000 Installations- und Betriebshandbuch

Epson

Epson PictureMate Snap PM 240 Bedienungsanleitung

Brother

Brother MFC-J430w Bedienungsanleitung

Lexmark

Lexmark MX710 Series Handbuch

Brother

Brother MFC-9760 Bedienungsanleitung

Lexmark

Lexmark XC8155 Bedienungsanleitung

Lexmark

Lexmark X642E Bedienungsanleitung

Sharp

Sharp MX-2310U Leitfaden

Aficio

Aficio 200 Bedienungsanleitung

Canon

Canon ImageCLASS 2300 Handbuch

Ricoh

Ricoh Pro C900 Bedienungsanleitung

Lexmark

Lexmark X925 Bedienungsanleitung

Brother

Brother Business Smart MFC-J4510dw Bedienungsanleitung

Epson

Epson Stylus CX8400 Series Bedienungsanleitung

Oce

Oce VarioLink 5022 Bedienungsanleitung

Copystar

Copystar CS 4551ci Bedienungsanleitung

Konica Minolta bizhub C750i Bedienungsanleitung

Beliebte Multifunktionsdrucker Handbücher anderer Marken