Konica Minolta PC-408 Bedienungsanleitung

E-1

INSTALLATION MANUAL

A0XW-9552-01

PC-408 Paper Feed Cabinet

Note:

Lifting the machine in an awkward position or

transporting it in a poorly balanced position could

result in personal injury. When transporting the

machine, assign an adequate number of persons

to the job and ensure that each person can take a

good position of not being excessively loaded

(mass: approx. 30.5 kg (67 lb)).

I. Accessory parts

Note:

This manual provides the illustrations of the acces-

sory parts and machine that may be slightly differ-

ent in shape from yours. In that case, instead of

the illustrations, use the appearance of your

machine to follow the installation procedure. This

does not cause any significant change or problem

with the procedure.

Note:

When removing the paper feed cabinet from its

shipping carton, do not hold the reinforcement

bracket (as a personal injury or a deformed frame

could result).

No. Name Shape Q’ty

1. Fixing leg A

2. Fixing leg B

3. Fixing leg

cover A

4. Fixing leg

cover B

5. Fixing

bracket A 3

6. Fixing

bracket B 1

7. Screw A

(black)

(4 × 8 mm) 5

4348U020MA

4348U020MB

4348U099MA

4348U099MB

4658U021AA

A093IXC004DA

4038IXC033DA

8. Screw B

(4 × 8 mm) 12

9. Screw C

(4 × 10 mm) 4

10. Installation

manual 1

set

After unpacking, be sure to get rid of the

packaging materials and keep them out of

the reach of children.

Putting the head in the plastic bag

involves danger of suffocation.

No. Name Shape Q’ty

4038IXC033DA

4038IXC033MA

4980IXC019MA

A093IXC027DA

Reinforcement bracket

II. Installation procedures

1. Turn off the machine.

2. Remove the cord clamp and unplug the power

cord from the machine (one screw).

3. Remove the protective tape from the paper feed

cabinet.

Note:

Do not peel the tape that fixes the paper feed cab-

inet hookup harness in position until the machine

is attached to the paper feed cabinet.

4. Insert the proper tool such as a screwdriver to the

hole on the back of the paper feed cabinet to take

out the drawer.

5. Remove the shipping preservatives and protec-

tive tape from the inside of the drawer.

6. Slide the drawer back in.

7. Pull out the handles.

A0XWMXC031MA

A0XWMXC036MB

Hookup

harness

A0XWMXC037MA

A0XWMXC038MB

A0XWMXC039MA

A0XWMXC101MB

Applied Machines: C360/C280/C220

COLOR MFP: 36 ppm/28 ppm/22 ppm

Product Code: A0ED

E-2

8. Holding the transportation handles at the right

and left of the machine, place the machine onto

the paper feed cabinet. When placing the

machine, use the positioning pins in the rear of

the paper feed cabinet to align the machine cor-

rectly with the cabinet.

Note:

• When transporting or moving the machines,

assign adequate number of persons.

• When attaching the machine, as the reference

fit the machine with the corner A and B of the

paper feed cabinet

9. Remove the drawer rear under cover from the

machine (one screw).

10. Peel the tape that fixes the paper feed cabinet

hookup harness in position.

11. Connect the two connectors of the paper feed

cabinet hookup harness to the machine.

12. Secure the paper feed cabinet to the machine by

the two fixing bracket A’s (two screw A’s fur-

nished with the paper feed cabinet).

When holding the transportation handles,

be careful not to catch your fingers in the

machine.

A0XWMXC102MA

A0XWMXC105MA

A0XWMXC001MB

A0XWMXC002MB

A0XWMXC003MB

A0XWMXC004MB

13. Reinstall the drawer rear under cover which has

been removed in step 9(one screw).

14. Insert the proper tool such as a screwdriver to

the hole on the back of the paper feed cabinet to

take out the drawer.

15. Slide out the second drawer from the paper feed

cabinet.

16. Secure the paper feed cabinet to the machine by

the fixing bracket A (right) and the fixing bracket

B (left).

Fixing bracket A :

one screw A furnished with the paper feed cabi-

net.

Fixing bracket B :

two screw A’s furnished with the paper feed cab-

inet.

Note:

The fixing bracket B can be placed upside down.

17. Slide the drawers back in.

18. Move the machine and paper feed cabinet to the

installation site. Then, adjust the two adjusters at

the front to let the paper feed cabinet sit on the

floor.

A0XWMXC005MB

A0XWMXC040MB

A0XWMXC028MA

A0XWMXC106MA

E-3

19. Install the fixing leg A’s at two locations in the

front shown in the illustration (six screw B’s fur-

nished with the paper feed cabinet).

Note:

When mounting the finisher at the same time, do

not install the fixing leg A or fixing leg cover A at

the left front side.

20. Install the fixing leg cover A’s (two pieces) at two

locations in the front shown in the illustration.

Note:

• Insert the fixing leg cover A’s in the direction

shown by arrow until they click into position.

• Insert the protruded portions of the fixing leg

cover A’s shown by the arrows into the fixing

leg.

21. Install the fixing leg A (left rear) and the fixing leg

B (right rear) shown in the illustration.

Tighten the screw C's into the hole A's to install

the fixing leg B.

Fixing leg A :

three screw B’s furnished with the paper feed

cabinet.

Fixing leg B :

four screw C’s furnished with the paper feed

cabinet.

Note:

If the screw C's cannot be tightened into the hole

A's because the machine is installed on cushioned

floor such as a carpet, use the hole B's.

To reduce the risk of injury due to unsta-

ble equipment, set stabilizers before use.

A0XWMXC029MA

➀

➁

➂

➁

➀

A0XWMXC030MA

To reduce the risk of injury due to unsta-

ble equipment, set stabilizers before use.

A0XWIXC002MA

➁

➀

➁

➃➂

➂

22. Install the fixing leg cover A (left rear) and the

fixing leg cover B (right rear) shown in the illus-

tration.

Note:

• Insert the fixing leg cover A and B in the direc-

tion shown by the arrows until they click into

position.

• Insert the protruded portions of the fixing leg

cover A and B shown by the arrows into the fix-

ing leg.

23. Plug the power cord into the machine and put

the cord clamp that has been removed in step 2

through the power cord to install it (one screw).

III. Loading paper

1. Turn on the machine’s main and sub power

switches.

2. Press the drawer release button and then slide

out the drawer from the paper feed cabinet.

3. Align the edges of the paper stack and place the

stack into the drawer.

Note:

• Make sure that the top level of the paper stack

does not exceed the ▼(MAX) paper level indi-

cator.

• Correct any curl in the paper before loading.

4. Align the edges of the paper stack and place the

stack into the drawer.

Note:

Make sure that the top level of the paper stack

does not exceed the ▼(MAX) paper level indica-

tor.

5. Slide the drawer back in.

A0XWIXC003DA

A0XWMXC031MA

A0XWMXC032MA

A0XWMXC033MA

A0XWMXC034MA

A0XWMXC035MA

E-4

IV. Making settings for paper size

1. Display the Service Mode screen (For details of

how to display the Service Mode screen, see the

Service Manual).

2. Touch “System 2.”

3. Touch “LCT Paper Size Setting.”

4. Check to see that “A4 ” is displayed with white

text on black.

5. Touch “END.”

V. Checking the paper reference position

1. Touch “Machine.”

2. Touch “Printer Area.”

3. Touch “Centering.”

4. Touch “3rd.” and then press the Start key.

A test print will be produced.

5. Measure width A from the edge of the paper to

the pattern printed on the test print and check that

it falls within the specified range.

Specifications: 3.0 mm ± 1.0 mm

• Adjusting the paper reference position

If the measured width A falls outside the specified

range, enter the correction value using the or

key.

6. Produce another test print and check to see if

width A falls within the specified range.

* If the use of the or key does not allow

the measurement to fall within the specified

range, perform the following steps.

7. Press the drawer release button and then slide

out the drawer from the paper feed cabinet.

8. Pull the release of right door and open the right

door.

9. Detach the protruded portion of the right door

from the paper feed cabinet to remove the right

door.

10. Remove the harness cover and the three fixing

screws to remove the plate.

Paper exit

direction

4061IXC147DA

A0XWMXC032MA

A0XWMXC050MA

A0XWMXC051MA

11. Loosen the adjusting screw and turn the screw D

clockwise or counterclockwise as necessary.

Note:

Use care not to damage or dent the paper path

surface inside the right door.

• If width A is greater than the specified value, turn

the screw D counterclockwise.

• If width A is greater than the specified value, turn

the screw D clockwise.

12. Load paper and let the machine produce

another test print. Then, check width A.

* Make the adjustment until width A falls within the

specified range.

13. Tighten the adjusting screw which has been

loosened in step 11.

1. Touch “Centering (Duplex 2nd side).”

2. Touch “3rd.” and then press the Start key.

A test print will then be produced.

3. Measure width A of the test pattern on the back-

side of the test print produced and check that it

falls within the specified range.

Specifications: 3.0 mm ± 2.0 mm

• Adjusting the Paper Reference Position

If the measured width A falls outside the specified

range, enter the correction value using the or

key.

4. Produce another test print and check to see if

width A falls within the specified range.

5. Touch “END.”

6. Touch “Exit” on the Service Mode screen.

7. Turn OFF and ON the Main Power Switch.

Note:

When displayed the Service Mode screen, be sure

to turn off the main power after exiting the Service

Mode screen and wait for 10 seconds or more

before turning on.

A0XWMXC052MA

A093IXC079DA

A093IXC080DA

4061IXC152DA

Paper exit

direction

Andere Konica Minolta Multifunktionsdrucker Handbücher

Konica Minolta

Konica Minolta bizhub PRO 1051 Series Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub C353 Series Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub 4702P Bedienungsanleitung

Konica Minolta

Konica Minolta BIZHUB PRO 1050 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub 363 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub C452 Series Gebrauchsanweisung

Konica Minolta

Konica Minolta BIZHUB 226 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub C360 Series Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub C353 Series Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub36 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub PRO 951 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub PRO 950 Series Bedienungsanleitung

Konica Minolta

Konica Minolta BIZHUB C300 Montage- und Wartungsanleitung

Konica Minolta

Konica Minolta bizhub C652 Series Bedienungsanleitung

Konica Minolta

Konica Minolta BIZHUB PRO 920 Montage- und Wartungsanleitung

Konica Minolta

Konica Minolta bizhub C203 Series Beilage

Konica Minolta

Konica Minolta bizhub C650 Series Montage- und Wartungsanleitung

Konica Minolta

Konica Minolta bizhub 363 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub C350 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub PRO C6501/C6501P Installationshandbuch

Konica Minolta

Konica Minolta BIZHUB 500 Bedienungsanleitung

Konica Minolta

Konica Minolta Magicolor 2590 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub C35P Bedienungsanleitung

Konica Minolta

Konica Minolta SU-502 Bedienungsanleitung

Beliebte Multifunktionsdrucker Handbücher anderer Marken

Triumph Adler

Triumph Adler DC 2016 Handbuch

Epson

Epson WorkForce WF-2510 Benutzerhandbuch

Epson

Epson Stylus Scan 2000 Installations- und Betriebshandbuch

Epson

Epson PictureMate Snap PM 240 Bedienungsanleitung

Brother

Brother MFC-J430w Bedienungsanleitung

Lexmark

Lexmark MX710 Series Handbuch

Brother

Brother MFC-9760 Bedienungsanleitung

Lexmark

Lexmark XC8155 Bedienungsanleitung

Lexmark

Lexmark X642E Bedienungsanleitung

Sharp

Sharp MX-2310U Leitfaden

Aficio

Aficio 200 Bedienungsanleitung

Canon

Canon ImageCLASS 2300 Handbuch

Ricoh

Ricoh Pro C900 Bedienungsanleitung

Lexmark

Lexmark X925 Bedienungsanleitung

Brother

Brother Business Smart MFC-J4510dw Bedienungsanleitung

Epson

Epson Stylus CX8400 Series Bedienungsanleitung

Oce

Oce VarioLink 5022 Bedienungsanleitung

Copystar

Copystar CS 4551ci Bedienungsanleitung