Konica Minolta FS-601 Bedienungsanleitung

SERVICE MANUAL

2004.09

Ver. 2.0

FS-601

THEORY OF OPERATION

After publication of this service manual, the parts and mechanism may be subject to change for

improvement of their performance.

Therefore, the descriptions given in this service manual may not coincide with the actual machine.

When any change has been made to the descriptions in the service manual, a revised version will be

issued with a revision mark added as required.

Revision mark:

• To indicate clearly a section revised, show to the left of the revised section.

A number within represents the number of times the revision has been made.

• To indicate clearly a section revised, show in the lower outside section of the correspond-

ing page.

A number within represents the number of times the revision has been made.

NOTE

Revision marks shown in a page are restricted only to the latest ones with the old ones deleted.

• When a page revised in Ver. 2.0 has been changed in Ver. 3.0:

The revision marks for Ver. 3.0 only are shown with those for Ver. 2.0 deleted.

• When a page revised in Ver. 2.0 has not been changed in Ver. 3.0:

The revision marks for Ver. 2.0 are left as they are.

2004/09 2.0 Adding the descriptions and correcting errors in

writing

2004/03 1.0 — Issue of the first edition

Date Service manual Ver. Revision mark Descriptions of revision

FS-601 Theory of Operation Ver2.0 Sep. 2004

I Outline

II Composition/Operation

CONTENTS

IOutline

1. Product specification ............................................................................................1-1

1.1 Type ................................................................................................................... 1-1

1.2 Functions ........................................................................................................... 1-1

1.3 Paper type ......................................................................................................... 1-1

1.3.1 Non-Sort ....................................................................................................... 1-1

1.3.2 Sort............................................................................................................... 1-1

1.3.3 Sort staple ....................................................................................................1-2

1.3.4 Saddle staple................................................................................................1-2

1.4 Stapling.............................................................................................................. 1-2

1.5 No. of sheets to be stapled (sort staple)............................................................1-3

1.6 Machine specifications....................................................................................... 1-3

1.7 Operating environment ...................................................................................... 1-3

II Composition/Operation

1. Overall composition..............................................................................................2-1

2. Drive system ........................................................................................................ 2-2

3. Paper path............................................................................................................ 2-3

4. Mechanical operations ......................................................................................... 2-4

4.1 Horizontal transport mechanism........................................................................ 2-4

4.1.1 Paper path switching mechanism ................................................................. 2-4

4.1.2 Finisher paper transport mechanism ............................................................ 2-5

4.2 Finishing tray mechanism .................................................................................. 2-6

4.2.1 Non-sort mode..............................................................................................2-6

4.2.2 Sort mode ..................................................................................................... 2-7

4.2.3 Staple Mode ................................................................................................. 2-7

4.2.4 Center staple booklet mode.......................................................................... 2-8

4.2.5 Paper stacking with finishing tray.................................................................. 2-9

4.2.6 Aligning mechanism ................................................................................... 2-10

4.2.7 Offsetting operation .................................................................................... 2-11

4.2.8 Exiting operation ......................................................................................... 2-12

4.3 Stapling unit ..................................................................................................... 2-13

4.3.1 Types and positions of staples.................................................................... 2-13

4.3.2 Stapling unit moving mechanism ................................................................ 2-14

4.3.3 Staple operation ......................................................................................... 2-15

4.3.4 Stapling unit................................................................................................2-16

FS-601 Theory of Operation Ver2.0 Sep. 2004

I Outline

II Composition/Operation

4.3.5 Stapling unit moving control ....................................................................... 2-17

4.3.6 Elevator tray mechanism ............................................................................ 2-18

4.4 Booklet tray...................................................................................................... 2-19

4.4.1 Overall composition.................................................................................... 2-19

4.4.2 Transport operation in saddle section......................................................... 2-20

4.4.3 Folding mechanism .................................................................................... 2-24

4.4.4 Paper folding start position......................................................................... 2-25

FS-601 Theory of Operation Ver2.0 Sep. 2004 Product specification

1-1

I Outline

1. Product specification

1.1 Type

1.2 Functions

1.3 Paper type

1.3.1 Non-Sort

1.3.2 Sort

Type Multi Staple Finisher with Saddle (Booklet)

Installation Freestanding

Document Alignment Center

Supplies Staple Cartridge

No. of Holes (optional) Metric: 4holes, Inch: 2holes / 3holes

Modes Normal

Non-Sort

Sort

Sort Staple

Saddle Staple

Paper Type Paper Size Weight Tray Capacity Exit Tray No. of Sheets

to be Stapled

Plain Paper

A6R to A3 Wide

5-1/2 × 8-1/2R/

5-1/2 × 8-1/2

12-1/4 × 18 60 to 256

g/m2

16 to 68 lb

60 to 90 g/m2

16 to 24 lb

Elevator Tray -

No. of

Sheets

Height

A4R / 8-

1/2×11R

or smaller

1000

150 mm

B4/

8-1/2×14

or larger

500

75 mm

Envelop

OHP Film

Label Paper

Thick Paper

Max. Min. Controlled by whichever

reached earlier

CD311.15

mm 86 mm

20 sheets

FD457.2

139.7

Paper Type Paper Size Weight Tray Capacity Exit Tray No. of Sheets

to be Stapled

Plain Paper

B5R/B5 to A3

8-1/2 × 11R/

8-1/2 × 11

11 × 17

60 to 90

g/m2

16 to 24 lb

No. of

Sheets

Height

A4R / 8-

1/2×11R

or smaller

1000

150 mm

B4/

8-1/2×14

or larger

500

75 mm

Elevator Tray -

Controlled by whichever

reached earlier

Product specification FS-601 Theory of Operation Ver2.0 Sep. 2004

1-2

I Outline

1.3.3 Sort staple

* The number of Sheets to be Stapled is limited for high-density images. (Color Wise: 3 to

20 sheets)

1.3.4 Saddle staple

1.4 Stapling

Paper Type Paper Size Weight Tray Capacity Exit Tray No. of Sheets

to be Stapled

Plain Paper

Cardboard

B5R/B5 to A3

8-1/2 × 11R/

8-1/2 × 11

11×17

Normal

Mode

60 to 90

g/m2

16 to 24 lb

Cover Mode

60 to 209

g/m2

16 to 55-1/2

No. of

Sheets

Height

No. of

Sets

A4R / 8-

1/2×11R

or smaller

1000

150 mm

B4/

8-1/2×14

or larger

500

75 mm

Normal Mode *1

Elevator Tray

A4R/8-

1/2×

11R or

smaller

2 to 50

B4/8-

1/2×14

or larger

2 to 25

Controlled by whichever

reached earlier

Paper Type Paper Size Weight Tray Capacity Exit Tray No. of Sheets

to be Stapled

Plain Paper

A4R, B4, A3

8-1/2 × 11R/

8-1/2 × 11,

8-1/2 × 14

11 × 17

60 to 90

g/m2

16 to 24 lb

10 sets

(No. of Sheets to be

Stapled: 6 to 10 sheets)

20 sets

(No. of Sheets to be

Stapled: 2 to 5 sheets)

Booklet Tray

2 to 10 sheets

(Max. 40

pages)

Staple Filling Mode Dedicated Staple Cartridge Mode (5000 staples)

Staple Detection Available (Nearly Empty: 40 remaining staples)

Stapling Position

Rear: Parallel 1 point

Front: Parallel 1 point

Center: Parallel 2 points

Stapled Paper Size B5R/B5 to A3, 8-1/2 × 11R / 8-1/2 × 11 to 11 × 17

Manual Staple None

Folding Mode Roller Pressure Folding

Folding Position Center of Paper

FS-601 Theory of Operation Ver2.0 Sep. 2004 Product specification

1-3

I Outline

1.5 No. of sheets to be stapled (sort staple)

A. A4R, 8-1/2 × 11R or smaller

B. B4, 8-1/2 × 14 or larger

1.6 Machine specifications

1.7 Operating environment

Conforms to the operating environment of the main unit.

No. of Sheets to

be Stapled

No. of Sets

Rear: Parallel Center: Parallel Front: Parallel

2 100 40 40

3 to 5 80 40 40

6 to 10 60 40 40

11 to 20 30 30 30

21 to 30 30 30 30

31 to 50 30 sets or 1000 sheets

No. of Sheets to

be Stapled

No. of Sets

Rear: Parallel Center: Parallel Front: Parallel

2 100 50 50

3 to 5 80 40 40

6 to 10 40 40 40

11 to 20 30 sets or 1000 sheets

21 to 25

Power Requirements DC 24 V (supplied from the main unit)

DC 5 V (generated by Finisher)

Max. Power

Consumption 65 W or less

Dimensions 601 mm (W) × 933 mm (H) × 603 mm (D)

23-3/4 inch (W) × 36-3/4 inch (H) × 23-3/4 inch (D)

Weight 41.6 kg (91-3/4 lb)

Product specification FS-601 Theory of Operation Ver2.0 Sep. 2004

1-4

I Outline

Blank page

Inhaltsverzeichnis

Beliebte Broschürenmacher Handbücher anderer Marken

QMS

QMS QDOC Bedienungsanleitung

Plockmatic

Plockmatic SR85 Cover Feeder Bedienungsanleitung

Galaxy

Galaxy BOOKIT Bedienungsanleitung

MyBinding

MyBinding MBM 87M Bedienungsanleitung

Formax

Formax FD 160 Montageanleitung

QMS

QMS QDOC Bedienungsanleitung

Horizon Fitness

Horizon Fitness Bookletmaker SPF-200A Bedienungsanleitung

Mamo

Mamo Cuce A3 Digit Bedienungsanleitung

Morgana

Morgana BM 2000 Bedienungsanleitung

Akiles

Akiles Cardmac Pro Bedienungsanleitung

Ricoh

Ricoh BOOKLET MAKER BK5010 Service-Handbuch

Plockmatic

Plockmatic BLM 35 Bedienungsanleitung

Plockmatic

Plockmatic BOOKLET MAKER Pro 30 Bedienungsanleitung

Formax

Formax FD 215S Bedienungsanleitung

GBC

GBC GBC MultiBind 220 Bedienungsanleitung

Ricoh

Ricoh BK5010e Bedienungsanleitung

Ricoh

Ricoh SR3170 Kurzanleitung

MBM

MBM StitchFold Bedienungsanleitung