Konica Minolta BIZHUB 162 Bedienungsanleitung

E-1

4034-7142-01

INSTALLATION MANUAL

Applied Machine: /

I. Outline of Installation Procedures for bizhub 162/bizhub 210 System

When installing the machine and associated options as a system, follow the order shown on the upper.

Note:

• For the detailed installation procedures for each option, follow the instructions given in the corresponding

Installation Manual and perform the procedures correctly.

• Once the Power Switch is turned ON, do not turn OFF it until the installation work has been completed.

• Make available collective manpower of an appropriate size for transporting the machine. (Machine mass:

38 kg/83-3/4 lb)

MB-501

SF-501

AD-504*

JS-503

✱Electron System Options

PF-502 DK-701 DK-703

Machine

FK-505

DK-702

HT-502

EM-101/EM-102

SU-502

Electron System Options

MC-503

NC-502

IC-205

MK-501* DF-502OC-504*

DF-605* * : bizhub 210 only

4034IXC003DA

4034-7142-01E.fm 1 ページ２００５年２月２８日　月曜日　午後４時５５分

E-2

II. Installation Space (unit: mm (inch))

bizhub 210 + DF-605 + MB-501 + PF-502 + DK-703

III. Pre-installation Check Items

1. Select a level and stable place for installing the

machine.

2. Be sure to use a power source of the voltage and

frequency indicated in the product specifications.

Ensure that the current carrying capacity of the

power outlet is at least equal to the current listed

in the product specifications.

3. Power the machine directly from a dedicated

power outlet. (Do not use an extension cord.)

4. Do not plug or unplug the power cord with wet or

dirty hands, otherwise you may get an electric

shock.

5. Avoid a hot and humid environment, or a place

exposed to direct sunlight.

6. Avoid a dusty location, or a place near volatile

and flammable substances.

7. Avoid a poorly ventilated place.

1099 (43-1/4)

599 (23-1/2) 400 (15-3/4)

375 (14-3/4) 1100 (43-1/4)

1069 (42)

1475 (58)

4034IXC002DA

100

(4) 356

(14)

4034-7142-01E.fm 2 ページ２００５年２月２８日　月曜日　午後４時５５分

E-3

IV. Accessory Parts

*1 Varies depending on the applicable marketing

area

*2 Not included in bizhub 210

V. Removing the Machine

1. Holding onto the portions shown in the illustra-

tion, remove the machine while maintaining a

level position.

Note:

Machine mass: 38 kg/83-3/4 lb

Make available collective manpower of an appro-

priate size for transporting the machine.

VI. Removing Protective Tape, Packing

and Other Shipping Materials

1. Remove the protective tape from different parts of

the machine.

2. Open the Right Door.

No. Name Q’ty

1. User’s Guide*1 1

2. User’s Guide (GDI printer controller)*1 1

3. Installation Manual (this manual) 1

4. Manual Holder 1

5. Seal 1

6. Size Label 1 set

7. Power Cord*1 1

8. Starter 1

9. CD-ROM (GDI & TWAIN Driver)*1 1

10. Original Cover*2 1

4686U083AA

1171U013AA

4034U001AB

4034U002AA

4034-7142-01E.fm 3 ページ２００５年２月２８日　月曜日　午後４時５５分

E-4

3. Remove the protective tape and the protective

parts of Image Transfer Roller.

Note:

There is a string that is wound around the Image

Transfer Roller shaft two to three times.

4. Close the Right Door.

5. Remove the protective tape and the Scanner Fix-

ing Pin.

6. Affix the Seal (accessory) in the position as

show.

VII. Loading the Starter

1. Open the Front Door.

2. Open the Right Door.

3. Remove two screws and the Imaging Unit.

4034IXC005DA

4021U026AA

4021U003AA

4034U003AA

4034U002AA

4021U005AC

4034-7142-01E.fm 4 ページ２００５年２月２８日　月曜日　午後４時５５分

E-5

4. Remove one screw at the location shown from

the front side of the Imaging Unit.

Loosen screw ➀.

5. Remove two screws at the location shown from

the rear side of the Imaging Unit.

Loosen screw ➁.

6. Opening both ends of the Cleaning Assy, swing it

down toward the rear as illustrated.

Note:

Cover the PC Drum with a cloth or similar item.

7. Remove the cover. (three screws)

8. Load the Imaging Unit with a packet of starter.

Note:

• Before pouring the starter, shake the packet

well.

• Rotate gear clockwise to add starter on mag

roller.

9. Reinstall the cover. (three screws)

4021U012AC

➀

4021U011AB

➁

4021U007AC

4034U005AA

4021U040AA

4506U007AA

4034-7142-01E.fm 5 ページ２００５年２月２８日　月曜日　午後４時５５分

E-6

10. Return the Cleaning Assy pushed toward the

rear at step 6 to the original position.

Note:

Before reinstalling the Cleaning Assy, be sure to

place the connector and harness into the slit prop-

erly.

11. Fix Imaging Unit with the screws removed at

step 4 and 5.

12. Fully open the Right Door and slide the Imaging

Unit back into the machine.

Note:

When reinstalling the Imaging Unit, slowly push it

until you feel that the drum gear is blocked and

then slide it all the way toward the rear. Doing

these steps all at once could damage the drum

gear.

13. Close the Front Door.

14. Close the Right Door.

15. Plug the power cord in the machine.

VIII. ATDC Sensor Adjustment

1. Turn ON the Power Switch.

2. Call the SERVICE MODE to the screen.

(See the Service Manual for how to call the SER-

VICE MODE to the screen.)

3. Press the ▼key four times to shown the Func-

tion mode.

4. Press the Yes key.

4021U066AB

4021U042AC

4035U001AA

4506U008AA

C4506O009AA

4506U008AA

4506U022AA4506U009AA

4034-7142-01E.fm 6 ページ２００５年２月２８日　月曜日　午後４時５５分

E-7

5. Press the ▼key two times.

6. Press the Yes key.

7. After the ATDC Sensor adjustment procedure has

been completed, open the Front Door and enter

the ATDC level setting value displayed on the

screen in the Adjust Label.

(Adjustment time: 3 min.)

IX. Installing the Toner Bottle

1. With the seal on the Toner Bottle facing up, slowly

peel off the seal as illustrated.

Note:

Slowly peel off seal, as some toner may puff out

from the bottle.

2. Open the Front Door.

3. Swing open the Bottle Holder to the front and

position the Toner Bottle.

Note:

Make sure that the UP marking faces up.

4. Tap the bottom of Toner Bottle three to four times.

C4506O009AA

4506U156AA

4506U022AA4034IXE001DA

4506U159CA

1139O139OA

4021U014AA

4021O243AA

4034-7142-01E.fm 7 ページ２００５年２月２８日　月曜日　午後４時５５分

E-8

5. Close the Bottle Holder and the Front Door. X. Loading Paper

1. Slide out the 1st Tray.

2. Press down on the Paper Lifting Plate.

3. Load the paper in the tray.

Note:

Do not load so much paper that the top of the

stack is higher than the ▼mark.

4021U015AA

4034U006AA

4034U007AA

4034U008AA

4034-7142-01E.fm 8 ページ２００５年２月２８日　月曜日　午後４時５５分

E-9

4. Slide the Edge Guide and Trailing Edge Stop

against the edges of the paper stack.

5. Slide the tray back into the machine.

XI. Mounting the Original Cover (Option

for bizhub 210 only)

Install the Original Cover.

XII. Affixing the Size Label

Affix the size label to the 1st Tray.

XIII. Installing the Manual Holder

Mount the Manual Holder as shown.

4034U009AA

4021U060AA

4034U010AA

4034U011AA

4034-7142-01E.fm 9 ページ２００５年２月２８日　月曜日　午後４時５５分

Andere Handbücher für BIZHUB 162

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Konica Minolta Kopierer Handbücher

Konica Minolta

Konica Minolta 7145 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub 350 Betriebsanleitung

Konica Minolta

Konica Minolta Di1610f Einrichtungshandbuch

Konica Minolta

Konica Minolta Dialta Di3510f Bedienungsanleitung

Konica Minolta

Konica Minolta 2230 Bedienungsanleitung

Konica Minolta

Konica Minolta 7415 Anleitung zur Verwendung

Konica Minolta

Konica Minolta BIZHUB C20 Bedienungsanleitung

Konica Minolta

Konica Minolta Copier 2223 Bedienungsanleitung

Konica Minolta

Konica Minolta BIZHUB C351 Bedienungsanleitung

Konica Minolta

Konica Minolta 7145 Bedienungsanleitung

Konica Minolta

Konica Minolta 7115 Bedienungsanleitung

Konica Minolta

Konica Minolta Fiery PRO80 65-55C-KM Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub 180 Bedienungsanleitung

Konica Minolta

Konica Minolta 1216 Bedienungsanleitung

Konica Minolta

Konica Minolta 7085/FORCE 85 Bedienungsanleitung

Konica Minolta

Konica Minolta 8020 Bedienungsanleitung

Konica Minolta

Konica Minolta Safe Q Bedienungsanleitung

Konica Minolta

Konica Minolta Di 200 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub 42 Bedienungsanleitung

Konica Minolta

Konica Minolta Di183 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub 25e Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub PRO C5501 Bedienungsanleitung

Konica Minolta

Konica Minolta 7075 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub C754e Bedienungsanleitung

Beliebte Kopierer Handbücher anderer Marken

Canon

Canon iR1210 Referenzhandbuch

Ricoh

Ricoh FW740 Bedienungsanleitung

Minolta

Minolta CF910 Bedienungsanleitung

Ricoh

Ricoh B003 Bedienungsanleitung

Xerox

Xerox EC70 Bedienungsanleitung

Oce

Oce 9800 Bedienungsanleitung

Olivetti

Olivetti d-Copia 1800 Bedienungsanleitung

Minolta

Minolta Di181 Bedienungsanleitung

Canon

Canon iR5000i Bedienungsanleitung

Telecrane

Telecrane F25 Bedienungsanleitung

Xerox

Xerox WorkCentre Pro 40 Bedienungsanleitung

Canon

Canon NP6317 Anleitung zur Verwendung

Sharp

Sharp AR-5015 N Bedienungsanleitung

Ricoh

Ricoh Di-C1 Bedienungsanleitung

Mita

Mita MIP-2400 Handbuch

Sharp

Sharp AL-2061 Bedienungsanleitung

Muratec

Muratec MFX-C2280 Bedienungsanleitung

Ricoh

Ricoh FT5034C Bedienungsanleitung