Konica Minolta KIP 9900 Bedienungsanleitung

Version A0

KIP 9900 User Guide

(1)

Thank you for purchasing the KIP 9900.

This USER’S MANUAL contains functional and operational explanations for the KIP 9900. Please

read this USER’S MANUAL carefully before using the Printer. Please keep this USER’S MANUAL

for future reference.

When this machine is installed in USA

FCC ID : VP8-K115

This equipment satisfies the requirements in Part 15 of FCC Rules for a Classic A computing

device.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference.

(2) This device must accept any interference received, including interference that may cause

undesired operation.

In order to comply with FCC radio-frequency radiation exposure guidelines for an uncontrolled

exposure, this device and its antenna must not be co-located or operating in conjunction with any

other antenna or transmitter.

FCC 15.105(a)

NOTE: This equipment has been tested and found to comply with the limits for a Class A digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the instruction manual, may cause harmful interference to

radio communications. Operation of this equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct the interference at his own expense.

FCC 15.21

Changes or modifications not expressly approved by the party responsible for compliance could

void the user’s authority to operate the equipment.

When this machine is installed in Canada

IC Company No. & UPN No. : 7391A-K115

Operation is subject to the following two conditions: (1) this device may not cause interference, and

(2) this device must accept any interference, including interference that may cause undesired

operation of the device.

When this machine is installed in Europe

This equipment satisfies the requirements in Pub.22 of CISPR Rules for a Classic B computing

device. Operation of this equipment in a residential area may cause unacceptable interference to

radio and TV reception requiring the operator to take whatever steps are necessary to correct the

interference.

Do not install this machine around electronic equipment or precision instruments. Other

devices may be effected by electrical noise during operation.

If Machine is installed near other electronic equipment, such as a TV or a radio, interference

to said equipment, such as noise or flickering, may occur. Use a separate power line and

install the PRINTER as far as possible from said equipment.

(2)

The International ENERGY STAR ® Office Equipment Program is an international program that

promotes energy saving through the penetration of energy efficient computers and other office

equipment. The program backs the development and dissemination of products with functions that

effectively reduce energy consumption. It is an open system in which business proprietors can

participate voluntarily. The targeted products are office equipment such as computers, monitors,

printers, facsimiles, copiers, scanners, and multifunction devices. Their standards and logos are

uniform among participating nations.

The symbol shown indicates that this product conforms to

SJ/T11364-2006 of People’s Republic of China Electronic

Industry Standard and does not apply to countries outside of

People’s Republic of China.

The symbol shown indicates that this product conforms to GB

18455-2001 11364-2006 of National Standard of the People’s

Republic of China and does not apply to countries outside of

People’s Republic of China.

As an ENERGY STAR ® Partner, Katsuragawa Electric Co., Ltd. has determined

that this product meets the ENERGY STAR ® guidelines for energy efficiency.

The symbol shown indicates that this product conforms to Directive

2002/96/EC of the European Parliament and the council of 27 January

2003 on waste electrical and electronic equipment (WEEE) and does not

apply to countries outside of EU.

NOTE

KIP 9900 will not function if no optional device is connected.

Please ask the Service Personnel for the optional device.

(3)

The following warnings are very important in order to safely use this product.

These notes are very important in preventing danger to the operator or operation of the printer.

The following symbols are found throughout the USER’S Manual and have the following meaning:

WARNING

This WARNING mark means that there is a possibility of death or serious

injury if you ignore or do not follow the said instruction.

Safety Warning

CAUTION

This CAUTION mark means that there is a possibility of injury or physical

damage if you ignore or do not follow the said instruction.

When marked with this symbol, “DO NOT ATTEMPT”

When marked with this symbol, “pay close attention to”

(4)

WARNING

Ground the product with a correct ground source or you may be electrically

shocked.

1. Connected outlet must satisfy the following condition.

U.S.A. / Europe : 220 - 240V (+6% / -10%), more than 16A, 50/60Hz

2. Use a circuit with an exclusive breaker.

3. Install the machine as close to the wall outlet as possible.

4. If you wish to move the printer, please contact to your service personnel.

1. Do not remove the screw and do not open the cover if not instructed to do

so in this User’s Manual. If you ignore this warning, you may be burnt or

receive an electric shock due to a hot item or electrically charged part

inside of the printer.

2. Do not disassemble or tamper with the printer. It may result in a fire or

electrical shock.

1. Do not plug in the printer into a multi-wire connector in which some other

equipment is plugged into. It may cause a fire due to outlet overheating.

2. Do not damage the Power Cord by stepping on or placing something heavy

items on it. If the Power Cord is damaged, it may cause a fire or you may

receive an electric shock. REPLACE THE CORD IF DAMAGED.

1. Do not PUT a flower vase, a flowerpot or any water-filled item on the

product. Spilt water could cause a fire or an electric shock.

2. If the product generates an abnormal smell or noise, turn it off and unplug it

from the wall outlet immediately.

Do not throw the toner into a fire or other sources of heat, as it can explode.

(5)

CAUTION

Do not install the machine in a humidified room or a dusty room.

Also, do not install the machine on an unstable floor as injuries may occur.

1. Unplug the printer before you move it. The power cord may be damaged

and it may result in a fire or electric shock.

2. If you do not use the printer for a long duration (holidays, company

shutdown) turn off and unplug the printer from the outlet for safety.

Do not pull the cord when you unplug the printer as you may damage the

Power Cord. Make sure to unplug the plug from the plug case.

There are hot items inside of the machine. Take great care not to touch these

items when you remove mis-fed media.

Ventilate the room well if you print in a small area.

(6)

POWER CORD INSTRUCTION

The installation of (or exchange to) a power plug which fits in the wall outlet of the installation

location shall be conducted in accordance with the following:

WARNING

Select a power plug which meets the following criteria;

- The plug has a voltage and current rating appropriate for the product’s rating marked on

its name plate.

- The plug meets regulatory requirements for the area.

- The plug is provided with a grounding pin or terminal.

If the appropriate plug does not fit the wall outlet in the installation, the customer shall install an

appropriate outlet.

Connector Type:

Configuration Standard Rating Usually found in

IEC60320:C19 20A 250V (UL)

16A 250V (IEC)

Plug Type: Model Rating 220-240V

Configuration Standard Rating Usually found in

NEMA6-20 20A 250V North America

(UL Listed)

CEE7/7 16A 250V European countries

Cord Type

Standard Rating Usually found in

SJT 3X12AWG Long <4.5m 20A 250V North America

(UL Listed)

HO5VV-F 3X1.5mm216A 250V European countries

Argentina

Chapter 1 Before Use

Chapter 1

Before Use

Page

1.1 Installation Requirements 1-1

1.2 Originals Prohibited from Duplication 1-2

1.3 Features 1-3

1.4 Specifications 1-4

1.5 Appearance 1-6

1.5.1 Front view 1- 6

1.5.2 Right side view 1- 7

1.5.3 Rear view 1- 8

1.5.4 Operation Panel 1-11

1.5.5 Media Indicators 1-12

1.5.6 “in use” Indicators 1-13

Chapter 1 Before Use1-1

1. 1 Installation Requirements

The following conditions are required for installation of the equipment.

(1) Power source should be as follows (according to your region).

U.S.A. / Europe 220 - 240V (+6% / -10%), 16A, 50/60Hz

For use in Europe: Plug of power cord must meet the standard of each country.

For PERMANENT CONNECTION, a readily accessible disconnect device shall be incorporated

in the building installation wiring.

(2) The equipment must be on an exclusive circuit.

The outlet must be near the equipment and easy accessible.

(3) Make sure to connect this equipment to a grounded outlet.

(4) The site temperature range = 10 - 32.5 degrees centigrade, with the humidity between 20% -

80% RH (NON CONDENSING).

Keep the equipment away from water sources, boilers, humidifiers or refrigerators.

(5) The installation site must not have open flames, dust or ammonia gases.

(6) The equipment should not be exposed to the direct sunlight.

Please draw curtains to block any sunlight.

(7) Ozone will be generated while this equipment is in use, although the quantity generated is within

safe levels. (see certifications)

Ventilate the room, if required.

(8) Levelling Bolts on the bottom of the KIP 9900 should touch the floor correctly.

And the equipment must be levelled.

Floor strength must be ample to sustain the weight of the equipment.

(9) Keep ample room around the equipment to ensure comfortable operation.

Required space is noted.

195cm (76.7 inch) or wider

120cm (47.2 inch) or wider

100cm (39.4 inch) or wider

50cm

(19.7 inch)

or wider

Rear

Front

Chapter 1 Before Use1-2

1. 2 Originals Prohibited from Duplication

It may be illegal to duplicate or copy certain types of originals and you may be punished by local or

regional laws, if copies are made of these types of originals.

Please be aware of your local or regional laws and which originals they forbid you to duplicate.

Some Examples:

[Originals prohibited from copying by the law(s)]

1. Do not copy Currency (Bill, Money, Bank Note, etc.), Government issued Negotiable

Instruments (National Bonds, Security, Local Debt Bonds, etc.).

2. Do not copy Foreign Currency or Foreign Negotiable Instruments.

3. Do not copy unused postal stamps or government postcards without permission to

make replica from said Governments.

4. Do not copy Government issued revenue stamps, certificate stamps that are

prescribed by Liquor Tax Act or the Commodity Tax Act.

[Special items which require your attention]

1. The government issues warnings if you are to copy private issued securities (stock certificate, draft,

check, goods ticket, etc.), commutation ticket or book of tickets, excluding that some specific

company copies such originals as many as it requires for its own business.

2. We recommend you not copy originals as government issued passports, public or

private issued licenses, automobile inspection certification, ID and tickets passes or meals.

[Originals protected by the copyright]

It is prohibited to copy originals such as books, music, paintings, printed copies, maps, drawings,

movie posters and pictures which are protected by the copyright laws.

Please see your local or regional laws.

Inhaltsverzeichnis

Andere Konica Minolta Drucker Handbücher

Konica Minolta

Konica Minolta bizhub C31P Bedienungsanleitung

Konica Minolta

Konica Minolta magicolor 2430 DL Bedienungsanleitung

Konica Minolta

Konica Minolta Magicolor 5450 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub pro 1200P Bedienungsanleitung

Konica Minolta

Konica Minolta CF2002 Handbuch

Konica Minolta

Konica Minolta A32P011 Bedienungsanleitung

Konica Minolta

Konica Minolta Magicolor 2450 Kurzanleitung

Konica Minolta

Konica Minolta AccurioPress C3080 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub PRO 950 Series Bedienungsanleitung

Konica Minolta

Konica Minolta BIZHUB C353P Bedienungsanleitung

Konica Minolta

Konica Minolta AccurioPress C2070 Bedienungsanleitung

Konica Minolta

Konica Minolta magicolor 1600W Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub C10P Bedienungsanleitung

Konica Minolta

Konica Minolta magicolor 7450 Bedienungsanleitung

Konica Minolta

Konica Minolta Drypro 832 Bedienungsanleitung

Konica Minolta

Konica Minolta Magicolor 7300 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub C253 Series Bedienungsanleitung

Konica Minolta

Konica Minolta DRYPRO SIGMA Bedienungsanleitung

Konica Minolta

Konica Minolta magicolor 2400W Bedienungsanleitung

Konica Minolta

Konica Minolta PAGEPRO 5650EN Bedienungsanleitung

Konica Minolta

Konica Minolta magicolor 7450 Bedienungsanleitung

Konica Minolta

Konica Minolta magicolor 1650EN Bedienungsanleitung

Konica Minolta

Konica Minolta Magicolor 3300 Bedienungsanleitung

Konica Minolta

Konica Minolta 7820n Bedienungsanleitung

Beliebte Drucker Handbücher anderer Marken

Lexmark

Lexmark 1400 Series Handbuch

Canon

Canon i70 Series Bedienungsanleitung

Evolis

Evolis Elypso Bedienungsanleitung

Kyocera

Kyocera FS-9530DN Bedienungsanleitung

Canon

Canon LASER SHOT LBP-1210 Bedienungsanleitung

Samsung

Samsung BIXOLON SRP-350plusF Bedienungsanleitung

Canon

Canon PIXMA PRO-1 Series Bedienungsanleitung

Canon

Canon PIXMA G3560 Einrichtungshandbuch

Dell

Dell Color Laser Printer 2130cn Bedienungsanleitung

Tektronix

Tektronix Phaser 840 Bedienungsanleitung

Epson

Epson ET-7750 Betriebsanleitung

Canon

Canon CLBR 460ps Bedienungsanleitung

Eltron

Eltron P210 Guide Bedienungsanleitung

Ricoh

Ricoh MD-P1 Bedienungsanleitung

Epson

Epson SC-F7100 series Bedienungsanleitung

Epson

Epson Stylus C40UX Bedienungsanleitung

Canon

Canon imagePASS-A2 Bedienungsanleitung

Canon

Canon S820D Bedienungsanleitung