Konica Minolta Magicolor 2400 Series Bedienungsanleitung

Inhaltsverzeichnis

Andere Konica Minolta Drucker Handbücher

Konica Minolta

Konica Minolta magicolor 8650 Bedienungsanleitung

Konica Minolta

Konica Minolta Magicolor 5440 dl Bedienungsanleitung

Konica Minolta

Konica Minolta Network Printer Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub C200 Bedienungsanleitung

Konica Minolta

Konica Minolta magicolor 1650EN Originalbetriebsanleitung

Konica Minolta

Konica Minolta bizhub PRO 950 Series Bedienungsanleitung

Konica Minolta

Konica Minolta Magicolor 3300 Bedienungsanleitung

Konica Minolta

Konica Minolta magicolor 7450 II Bedienungsanleitung

Konica Minolta

Konica Minolta Magicolor 2300W Bedienungsanleitung

Konica Minolta

Konica Minolta magicolor 2400W Bedienungsanleitung

Konica Minolta

Konica Minolta Crown II Betriebsanleitung

Konica Minolta

Konica Minolta 1800767-001A Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub 20P Originalbetriebsanleitung

Konica Minolta

Konica Minolta PagePro 1350W Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub 4052 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub 20 Bedienungsanleitung

Konica Minolta

Konica Minolta AccurioPress C3080 Bedienungsanleitung

Konica Minolta

Konica Minolta magicolor 1600W Originalbetriebsanleitung

Konica Minolta

Konica Minolta bizhub PRO 950 Series Bedienungsanleitung

Konica Minolta

Konica Minolta AccurioPress C3080 Bedienungsanleitung

Konica Minolta

Konica Minolta GP-502 Bedienungsanleitung

Konica Minolta

Konica Minolta PagePro 9100 Bedienungsanleitung

Konica Minolta

Konica Minolta Magicolor 5450 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub C31P Bedienungsanleitung

Beliebte Drucker Handbücher anderer Marken

Lexmark

Lexmark 1400 Series Handbuch

Canon

Canon i70 Series Bedienungsanleitung

Evolis

Evolis Elypso Bedienungsanleitung

Kyocera

Kyocera FS-9530DN Bedienungsanleitung

Canon

Canon LASER SHOT LBP-1210 Bedienungsanleitung

Samsung

Samsung BIXOLON SRP-350plusF Bedienungsanleitung

Canon

Canon PIXMA PRO-1 Series Bedienungsanleitung

Canon

Canon PIXMA G3560 Einrichtungshandbuch

Dell

Dell Color Laser Printer 2130cn Bedienungsanleitung

Tektronix

Tektronix Phaser 840 Bedienungsanleitung

Epson

Epson ET-7750 Betriebsanleitung

Canon

Canon CLBR 460ps Bedienungsanleitung

Eltron

Eltron P210 Guide Bedienungsanleitung

Ricoh

Ricoh MD-P1 Bedienungsanleitung

Epson

Epson SC-F7100 series Bedienungsanleitung

Epson

Epson Stylus C40UX Bedienungsanleitung

Canon

Canon imagePASS-A2 Bedienungsanleitung

Canon

Canon S820D Bedienungsanleitung

Cleaning (Preventative Maintenance) on the magicolor 2400 Series

Read all caution and warning labels carefully, making sure to follow any instructions

contained in them. These labels are located on the inside of the printer’s covers and

the interior of the printer body.

Handle the printer with care to preserve its life. Abuse may cause damage and void your

warranty. If dust and paper scraps remain on the inside or outside of the printer, printer

performance and print quality will suffer, so the printer should be cleaned periodically. Keep

the following guidelines in mind. WARNING!

Turn off the printer, unplug the power cord, and disconnect all interface cables before

cleaning. Do not spill water or detergent into the printer; otherwise the printer will be

damaged and an electric shock may occur.

The fuser unit is hot. When the right side cover is opened, the fuser unit temperature

drops gradually (one hour wait time).

- Be careful when cleaning the inside of the printer or removing media misfeeds, as the

fuser unit and other internal parts may be very hot.

- Do not place anything on top of the printer.

- Use a soft cloth to clean the printer.

- Never spray cleaning solution directly on the printer’s surface; the spray could

penetrate through the air vents of the printer and damage the internal circuits.

- Avoid using abrasive or corrosive solutions or solutions that contain solvents (such as

alcohol and benzene) to clean the printer.

- Always test any cleaning solution (such as mild detergent) on a small inconspicuous

area of your printer to check the solution’s performance.

- Never use sharp or rough implements, such as wire or plastic cleaning pads.

- Always close the printer’s covers gently. Never subject the printer to vibration.

- Do not cover the printer immediately after using it. Turn it off and wait until it cools

down.

- Do not leave the printer’s covers open for any length of time, especially in well-lit

places; light may damage the toner cartridges.

- Do not open the printer during printing.

- Do not tap media stacks on the printer.

- Do not lubricate or disassemble the printer.

- Do not tilt the printer.

- Do not touch the electrical contacts, gears, or laser devices. Doing so may

damage the printer and cause the print quality to deteriorate.

- Keep media in the output tray at a minimum level. If the media is stocked too

high, your printer may experience media misfeeds and excessive media curl.

- Keep the printer level to avoid toner spillage.

- When lifting the printer, grasp the areas shown in the figure below.

- If you get toner on your skin, wash it off with cool water and a mild soap.

If you get toner in your eyes, wash it out immediately with cool water and consult a

doctor.

- Make sure any parts removed during cleaning are replaced before you plug in

the printer.

Cleaning the Printer

Be sure to turn off the printer and unplug the power cord before cleaning.

Exterior

Interior

Cleaning the Media Feed Roller and Laser Lens

1. Pull the lever, and then open the top cover. If there is paper in the output tray,

remove it, and then fold up the output tray before opening the top cover. Do not

touch the transfer belt.

.

2. Slowly pull out the drum cartridge.

Position the removed drum cartridge as shown in the illustration at the right. Be sure to

keep the drum cartridge horizontal and place it where it will not become dirty. Do not

leave the drum cartridge removed for more than 15 minutes, and do not place the

removed drum cartridge in a location where it would be exposed to direct light (such as

sunlight).

3. Clean the media feed rollers by wiping them with a soft, dry cloth. If necessary, you

can also try cleaning the media feed rollers with 409 cleanser (do not spray directly

on the rollers ... spray on the cloth only). If 409 is not available, try using a damp

cloth.

4. Clean the laser lens by wiping them with a soft, dry cloth.

5. Reinstall the drum cartridge.

6. Carefully close the top cover.

Cleaning the Duplex Option Feed Rollers

Instructions below do NOT apply to the magicolor 2400W model printer.

1. Open the duplex cover.

2. Clean the feed rollers by wiping them with a soft, dry cloth.

3. Carefully close the duplex cover.

Cleaning the Media Feed Rollers for Tray 2

Instructions below do NOT apply to the magicolor 2400W model printer.

1. Lift the printer off of Tray 2 and temporarily place it on a sturdy flat surface.

2. Clean the media feed rollers by wiping them with a soft, dry cloth.

3. Lift the printer and reinstall it on top of Tray 2.