Record a message:
Press , the battery LED indicator light will illuminate.
You have 6 seconds to record your personal message. Once the
light goes off your recording time is over.
The alarm has a permanent memory for stored telephone numbers
and voice message. To change the telephone number or recorded
message, repeat above.
Silent alarm:
It’s possible to use the alarm as a silent alarm. In this case the siren
will not loud but only the telephone dialer will work.
Press to activate the silent alarm. To retrieve the siren
press .
Operation:
Press, when leaving, keypad number . A confirmation tone will
sound to indicate the alarm is armed. You have 30 seconds to leave
the area. After this time, if motion is detected the alarm will start to
dial the stored telephone numbers after 10 seconds (delay time)
and the alarm siren will sound 20 seconds after the first telephone
number is dialed.
Press, when entering, the 4-digit security code within 10 seconds,
to disarm the alarm.
When the alarm is activated, it will dial the first stored telephone
number. If the first telephone number is not answered within 45
seconds the second stored number will be dialed and so on. All
three stored telephone numbers will be dialed if the unit is activated,
unless the security code is entered to disarm the alarm.
Remark: if the LED indicator is constantly on, it means that the
batteries need to be replaced.
