Konig VID-TRANS300 Bedienungsanleitung

2.4

GHz

PAN

TILT

MIC

BUILT-IN

NIGHT

VISION

IR LED

LCD

TFT

UNIT

CHANNELS

OBSERVATION

SECURITY

PLL

CIRCUIT

VID-TRANS300

VID-TRANS310

VID-TRANS320

MANUAL

ENGLISH

Systems:

VID-TRANS300

1x Pan/Tilt Camera

1x 2.5” LCD/TFT monitor

2x AC/DC adapter

1x Audio/Video cable

1x In ear headphone

Batteries not included

VID-TRANS310

1x Pan/Tilt camera

1x Receiver with antenna

1x Remote control

2x AC/DC adapter

1x Audio/Video cable

Batteries not included

VID-TRANS320

1x Pan/Tilt camera

1x Remote control

1x AC/DC adapter

Batteries not included

Descriptio receiver VID-TRANS300:

Cha el i dicator: indicates which channel is in use

LCD scree : displays the picture of the camera

Camera ma ual vertical rotatio : rotates the camera in vertical

direction (cursor up = camera up, cursor down = camera down)

Camera power butto : switches the camera on or off

Camera auto horizo tal rotatio : rotates the camera automatically in

horizontal direction (camera rotates from right to left and stops)

Power jack: connection for AC/DC adapter

AV output: connection to TV/monitor or recorder with audio/video cable

A te a: omni directional antenna for receiving of 2.4GHz signal

Volume co trol: adjusts the volume

Bright ess co trol: for more or less brightness in the picture

Cha el butto : select channel 1, 2 or 3 (note: select the same channel

as chosen on the camera)

Camera ma ual horizo tal rotatio : rotates the camera in horizontal

direction (cursor left = camera left, cursor right = camera right)

Power switch: to switch the receiver on or off

Earpho e socket: connection for earphone

Battery cover: battery compartment for 4x AAA batteries

Bracket: folding bracket for positioning the receiver straight up

Operatio receiver VID-TRANS300:

1) Put the camera in position

2) Connect the AC/DC adapter to the camera.

Switch on the camera with the power switch.

The power indicator lights up. Select a

channel.

3) Connect the AC/DC adapter to the receiver or

place 4x AAA batteries into the battery

compartment for power. Switch on the receiver

with the power switch. The channel indicator lights

up. Select the same channel as chosen on the

camera. The display shows the picture of the

camera.

4) Use the cursor buttons to rotate the camera horizontal and/or vertical.

5) If desired, adjust the volume and set the brightness of the picture.

6) With the AV output it’s possible to connect the

receiver to a TV/monitor or recorder with the

audio/video cable

7) Switch off the camera with the camera power button if

the system is not in use.

8) The receiver supports up to 3 cameras working at the

same time. All cameras can be seen in sequel. Press and

hold the channel button on the receiver for 2 seconds to

enable the automatic looping function. The channels are

shown one by one every 8 seconds. Press the channel

button on the receiver again to exit the looping function.

For the descriptio a d operatio of the camera see chapter :

“descriptio camera”

Descriptio receiver VID-TRANS310

A te a: omni directional antenna for receiving of 2.4GHz signal

Cha el i dicator: indicates which channel is in use

Cha el butto : select channel 1, 2 or 3 (note: select the same channel

as chosen on the camera)

Mode co trol: setting for channel set up

AV output: connection to TV/monitor or recorder with audio/video cable

Power socket: connection for AC/DC adapter

Mute: turn off the sound for 30 seconds

Operatio receiver VID-TRANS310:

1) Put the camera in position

2) Connect the AC/DC adapter to the camera.

Switch on the camera with the power switch. The

power indicator lights up. Select a channel.

3) Connect the antenna to the receiver.

4) Connect the receiver (AV output) with

the audio/video cable to a TV/monitor or

recorder.

Mute Button

5) Connect the AC/DC adapter the power socket. The

receiver switch on automatically. The channel indicator

lights up. Select the same channel as chosen on the

camera. Refer to the chapter channel set up for the

channel settings.

6) The TV/monitor shows the picture of the camera.

Cha el set-up receiver VID-TRANS300:

The receiver supports up to 3 cameras working at the same time. All

cameras can be seen in sequel. See mode control at the backside of the

camera for settings.

Switch 1: switch up, reception of channel 1 is active. Switch down,

channel 1 is off

Switch 2: switch up, reception of channel 2 is active. Switch down,

channel 2 is off

Switch 3: switch up, reception of channel 3 is active. Switch down,

channel 3 is off

Switch 4: L (loop function). Switch up, the sequel is active for the

channel with the switch up. Switch down, the loop function is off.

Channel will switch every 5 seconds.

Switch 5: switch up, the sound is on. Switch down, the sound is off.

Note: alarm function is not available

For the descriptio a d operatio of the camera see chapter :

“descriptio camera”

Descriptio camera VID-TRANS320 (VID-TRANS300, 310):

Rotate axis: rotating part of the camera, controlled by remote control

I frared lights: 10 IR LED’s for night view

Le s: adjustable (focus) lens with CMOS image chip

Micropho e: built in microphone for sound monitoring

Base: stand/holder for the Pan & Tilt camera

A te a: omni directional antenna for sending of 2.4GHz signal

I dicator: indicates if camera is on or off

Cha el switch: select channel 1, 2 or 3

Power jack: connection for AC/DC adapter

Power switch: to switch the camera on or off

Operatio camera VID-TRANS320 (VID-TRANS300, 310):

1) Put the camera in position

2) Connect the AC/DC adapter to the

camera. Switch on the camera with the

power switch. The power indicator lights

up. Select a channel.

Microphone

Operatio with VID-TRANS300:

Use the cursor buttons on the LCD monitor of the receiver to rotate the

Pan & Tilt camera.

When using up to 3 cameras, select for every camera a different

channel. The Pan & Tilt function is available for the channel which is

chosen on the receiver.

Operatio with VID-TRANS310:

Use the cursor buttons on the remote control to rotate the Pan & Tilt

camera.

When using up to 3 cameras, select for every camera a different

channel.

The Pan & Tilt function is available for the channel which is chosen on

the remote control. Select on the receiver the same channel to see the

picture on TV/monitor.

Descriptio remote co trol:

A te a: telescopic omni directional antenna

Ma ual vertical rotatio butto : rotates the camera in vertical direction

(cursor up = camera up, cursor down = camera down)

Camera cha el butto : select a channel (channel 4 is not available)

Camera power butto : switches the camera on or off

Auto horizo tal rotatio butto : rotates the camera automatically in

horizontal direction (camera rotates from right to left and stops)

Ma ual horizo tal rotatio butto : rotates the camera in horizontal

direction (cursor left = camera left, cursor right = camera right)

Battery cover: battery compartment for 2x AAA batteries

Operatio remote co trol:

1) Press the power button on the remote control to switch on the camera

(Press again to switch off the camera when not in use).

2) Press the channel button on the remote controller to select the

channel.

3) Use the cursor buttons to rotate the Pan & Tilt camera to a desired

position. With the auto rotation button the camera automatically rotates

from right to left in horizontal direction and stops.

Safety precautio s:

To reduce risk of electric shock, this product should ONLY be opened by

an authorized technician when service is required. Disconnect the

product from mains and other equipment if a problem should occur.

Warra ty:

No guarantee or liability can be accepted for any changes and

modifications of the product or damage caused due to incorrect use of

this product.

Ge eral:

Designs and specifications are subject to change without notice.

Specificatio s:

Receiver VID-TRANS300

Power Supply: 8 VDC

Controls: Brightness, volume, camera on/off

Display: 6,5cm

Consumption Current (Max.): 250mA

Receiving Frequency: 2,400GHz~2,483GHz

Modulation: FM

Receiving Sensitivity: <= 85 dBm

Video Output Signal Impedance: 75 ohm

Video Output Signal Level: 1.0 V +/ 0.15 Vpp

Video S/N Ratio: 38dB

Audio Output Signal Impedance: 600 ohm

Audio Output Signal Level: 1.25 V +/ 0.25 Vpp / 1 kHz

Audio Output Frequency Range: 250 Hz ~ 10 kHz

Effective Range: 100m (open field) 30m (indoor)

Dimensions (WxLxH): 83 x 110 x 18 mm (Excluding Antenna)

Weight: 115g

Operating Temperature: 10°C~+50°C

Receiver VID-TRANS310

Power Supply: 8 VDC

Consumption Current (Max.): 170mA

Receiving Frequency: 2,400GHz~2,483GHz

Modulation: FM

Receiving Sensitivity: <= 85 dBm

Video Output Signal Impedance: 75 ohm

Video Output Signal Level: 1.0 V +/ 0.15 Vpp

Video S/N Ratio: 38dB

Audio Output Signal Impedance: 600 ohm

Audio Output Signal Level: 1.25 V +/ 0.25 Vpp / 1 kHz

Audio Output Frequency Range: 250 Hz ~ 10 kHz

Effective Range: 100m (open field) 30m (indoor)

Dimensions (WxDxH): 105 x 74 x 22 mm (Excluding Antenna)

Weight: 123g

Operating Temperature: 10°C~+50°C

Remote control

Power supply: 2x AAA battery

Consumption Current: 40mA

Dieses Handbuch passt für folgende Modelle

Andere Konig Sicherheitssystem Handbücher

Konig

Konig SEC-DVR504 Bedienungsanleitung

Konig

Konig SEC-ALARM200 Bedienungsanleitung

Konig

Konig SEC-AED10 (V.2) Bedienungsanleitung

Konig

Konig SEC-APC10 Bedienungsanleitung

Konig

Konig SAS-ALARM100 Bedienungsanleitung

Konig

Konig SAS-APR20 Bedienungsanleitung

Konig

Konig SEC-APR20 Bedienungsanleitung

Konig

Konig SAS-TRANS60/U Bedienungsanleitung

Konig

Konig SEC-ALARM100 Bedienungsanleitung

Konig

Konig SEC-ALARM200 Bedienungsanleitung

Beliebte Sicherheitssystem Handbücher anderer Marken

Inner Range

Inner Range Concept 2000 Bedienungsanleitung

Climax

Climax Mobile Lite R32 Montageanleitung

CADDX

CADDX NX-6 Bedienungsanleitung

FBII

FBII XL-31 Series Bedienungsanleitung

Johnson Controls

Johnson Controls PENN Connected PC10 Bedienungsanleitung

Aeotec

Aeotec Siren Gen5 Bedienungsanleitung

Blaupunkt

Blaupunkt SA 2700 Bedienungsanleitung

IDEAL

IDEAL Accenta Betriebsanleitung

AJAX

AJAX DoubleButton Bedienungsanleitung

Swann

Swann SW-P-MC2 Bedienungsanleitung

Ecolink

Ecolink Siren+Chime Bedienungsanleitung

Digital Monitoring Products

Digital Monitoring Products XR150 Bedienungsanleitung

EDM

EDM Solution 6+6 Wireless-AE Bedienungsanleitung

Highway Safety Group

Highway Safety Group EA401 Bedienungsanleitung

Siren

Siren LED GSM Bedienungsanleitung

Detection Systems

Detection Systems 7090i Montageanleitung

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Bedienungsanleitung

Siemens

Siemens FDM273 Bedienungsanleitung