Kontron Embedded Computers PxV206 Bedienungsanleitung
PxV206 – 2U Platform
User’s Manual
Version 1.01
Kontron Embedded Computers GmbH
0-0096-2594
Contents
PxV206 – 2U Platform – User’s Manual 1
Contents
Introduction..........................................................................................................3
Symbols used in this Manual.................................................................................4
Important Instructions.........................................................................................5
Note on the Guarantee..........................................................................................5
Exclusion of Accident Liability Obligation...............................................................5
Liability Limitation / Exemption from the Guarantee Obligation.............................5
Safety Instructions...............................................................................................6
Operation of Laser Source Devices.......................................................................8
Electrostatic Discharge (ESD)................................................................................8
Grounding Methods...........................................................................................9
Instructions for the Lithium Battery........................................................................9
FCC Statement....................................................................................................10
Electromagnetic Compatibility..............................................................................10
Scope of Delivery...............................................................................................11
Type Labels and Product Identification................................................................11
Product Description...........................................................................................12
Front Panel..........................................................................................................14
Drive Door.......................................................................................................15
Serial Interface Connector COM1...................................................................15
Combined PS/2 Mouse and Keyboard Connector...........................................15
Operating Elements.........................................................................................16
Fan Door.........................................................................................................16
Front Panel – LEDs Status..............................................................................17
Rear Panel...........................................................................................................18
Ports on the Rear Side....................................................................................19
Power Supply Unit...........................................................................................19
Versions of the Power Supply Unit......................................................................20
Redundant Power Supply Unit........................................................................21
Internal Drive........................................................................................................24
Backplane............................................................................................................24
SBC Board......................................................................................................25
Assembly, Disassembly....................................................................................26
Mounting the Rubber Feet...................................................................................26
Accessing Internal Components..........................................................................27
Contents
2PxV206 – 2U Platform – User’s Manual
Installing the Additional Cards........................................................................27
Start-Up..............................................................................................................30
Power Cord Connection......................................................................................30
AC-Connection ...............................................................................................30
AC-Connection (with redundant PSU)............................................................30
DC-Connection ...............................................................................................31
Operating System and Hardware Components Drivers.......................................31
Instruction for Installation in a 19” Cabinet....................................................32
Maintenance and Prevention............................................................................34
Changing the Air Filter Mat..................................................................................34
Lithium Battery ....................................................................................................35
Main Specifications...........................................................................................36
Electrical Specifications.......................................................................................38
Mechanical Specifications...................................................................................38
Environmental Specifications..............................................................................39
CE-Directives, Standards and Approvals............................................................40
Technical Appendix – Interfaces .....................................................................41
RS232 .................................................................................................................41
RS422 (COM 2 only) RS485 (COM2 only)..................................................42
PS/2 Keyboard and Mouse Connector................................................................42
Parallel Port.........................................................................................................43
Technical Support.............................................................................................44
Returning Defective Merchandise .......................................................................45
Introduction
PxV206 – 2U Platform – User’s Manual 3
Introduction
Kontron Embedded Computers would like to point out that the information
contained in this manual may be subject to technical alteration, particularly as a
result of the constant upgrading of Kontron Embedded Computers products. The
attached documentation does not entail any guarantee on the part of Kontron
Embedded Computers with respect to technical processes described in the
manual or any product characteristics set out in the manual. Kontron Embedded
Computers does not accept any liability for any printing errors or other
inaccuracies in the manual unless it can be proven that Kontron Embedded
Computers is aware of such errors or inaccuracies or that Kontron Embedded
Computers is unaware of these as a result of gross negligence and Kontron
Embedded Computers has failed to eliminate these errors or inaccuracies for this
reason. Kontron Embedded Computers expressly informs the user that this
manual only contains a general description of technical processes and
instructions which may not be applicable in every individual case. In cases of
doubt, please contact Kontron Embedded Computers.
This manual is protected by copyright. All rights are reserved by Kontron
Embedded Computers. Copies of all or part of this manual or translations into a
different language may only be made with the prior written consent of Kontron
Embedded Computers. Kontron Embedded Computers points out that the
information contained in this manual is constantly being updated in line with the
technical alterations and improvements made by Kontron Embedded Computers
to the products and thus this manual only reflects the technical status of the
products by Kontron Embedded Computers at the time of printing.
© 2003 by Kontron Embedded Computers
Printing and duplication, even of sections, is only permissible with the express
approval of:
Kontron Embedded Computers GmbH
Oskar-von-Miller-Str. 1
85385 Eching near Munich
Germany
Introduction
4PxV206 – 2U Platform – User’s Manual
Symbols used in this Manual
Symbol Meaning
This symbol indicates the danger of injury to the user or the risk
of damage to the product if the corresponding warning notices
are not observed.
This symbol indicates that the product or parts thereof may be
damaged if the corresponding warning notices are not observed.
This symbol indicates general information about the product and
the user manual.
This symbol precedes helpful hints and tips for daily use.
Important Instructions
PxV206 – 2U Platform – User’s Manual 5
Important Instructions
This chapter contains instructions which must be observed when using your
PxV206 – 2U Platform.
The manufacturers instructions provide useful information on your PxV206.
Note on the Guarantee
Due to their limited service life, parts which by their nature are subject to a
particularly high degree of wear (wearing parts) are excluded from the guarantee
beyond that provided by law. This applies, for example, batteries.
Exclusion of Accident Liability Obligation
Kontron Embedded Computers shall be exempted from the statutory accident
liability obligation if the user fails to observe the safety instructions.
Liability Limitation / Exemption from the
Guarantee Obligation
In the event of damage to the device caused by failure to observe the hints in this
manual and eventually on the device (especially the safety instruction), Kontron
Embedded Computers shall not be required to honor the guarantee even during
the guarantee period and shall be exempted from the statutory accident liability
obligation.
Safety Instructions
6PxV206 – 2U Platform – User’s Manual
Safety Instructions
Please read this section carefully and observe the instructions for your own
safety and correct use of the device.
The chapter also contains information on approval and interference suppression
of your PxV206.
Observe the warnings and instructions on the device and in the manual.
The PxV206 is built and tested by Kontron Embedded Computers in accordance
with EN60950/VDE0805 and left the works in a perfectly safe condition.
In order to maintain this condition and ensure safe operation, the user must
observe the instructions and warnings contained in this manual.
qThe device must be used in accordance with the instructions for use.
qThe electrical installations in the room must correspond to the requirements of
the respective regulations.
qTake care that there are no cables, particularly mains cables, in areas where
persons can trip over them.
qDo not use a mains connection in sockets shared by a number of other power
consumers. Do not use an extension cable.
qOnly use the mains cable supplied.
qThe unit is complete disconnected from the power source, only when the
power cord is disconnected from the power source. Therefore the power cord
and its connectors must always remain easily accessible.
qDo not set up the device in the proximity of heat sources or in a damp
location. Make sure the device has adequate ventilation.
qOnly devices and components may be connected to the interfaces of the
system which fulfil the requirements of a SELV circuit (security low voltage
output) in accordance with EN60950.
Safety Instructions
PxV206 – 2U Platform – User’s Manual 7
qFor PxV206-C only: it is not allowed to remove or to bridge the ATX-plug with
the Kontron ATX-extension (a T10A fuse integrated in the 3.3V-circuit of the
–48V DC-PSU).
qAll plugs on the connection cables must be screwed or locked to the housing.
qThe device is destined to be used in horizontal position only.
qIt must be assumed that safe operation is no longer possible,
– if the device has visible damage or
– if the device no longer functions.
In these cases the device must be shut down and secured against
unintentional operation.
qRepairs may only be carried out by a person authorised by Kontron
Embedded Computers.
qMaintenance or repair on the open device may only be carried out by qualified
personnel authorised by Kontron Embedded Computers familiar with the
associated dangers.
qThe device may only be opened for the installation and removal of extension
cards in accordance with the description in this manual.
qIf extensions are made to the device the legal stipulations and the device
specifications must be observed.
qThe device must be switched off before installing the extension cards.
qOnly original accessories approved by Kontron Embedded Computers may be
used.
For DC powered systems
qThe DC-input should not exceed 60V DC and must fulfil SELV Requirements
of EN60950 standard.
qThe AC/DC-supplies don’t fulfil the requirements for centralised DC-Power
systems as required for the use in USA. That kind of units are not allowed to
be used as a stand-alone computer.
Safety Instructions
8PxV206 – 2U Platform – User’s Manual
Operation of Laser Source Devices
Fig. 1: Warning about laser radiation
The CD ROM drives contain light-emitting diodes (classified in accordance with
IEC 825-1:1993: LASER CLASS 1) and, therefore, must not be opened.
If the enclosure of such a drive is opened, invisible laser radiation is emitted. Do
not allow yourself to be exposed to this radiation.
The laser system meets the code of Federal Regulations 21 CFR,1040 for the
USA and Canadian Radiation Emitting Devices Act, REDR C 1370.
Electrostatic Discharge (ESD)
A sudden discharge of electrostatic electricity can destroy static-sensitive devices
or micro-circuitry. Proper packaging and grounding techniques are necessary
precautions to prevent damage. Always take the following precautions:
1.Transport boards in static-safe containers such as boxes or bags.
2.Keep electrostatic sensitive parts in their containers until they arrive at static-
free stations.
3.Always be properly grounded when touching a sensitive board, component, or
assembly.
4.Store electrostatic-sensitive boards in protective packaging or on conductive
foam.
Safety Instructions
PxV206 – 2U Platform – User’s Manual 9
Grounding Methods
Guard against electrostatic damage at workstations by following these steps:
1.Cover workstations with approved anti-static material. Provide a wrist strap
connected to a work surface and properly grounded tools and equipment.
2.Use anti-static mats, heel straps, or air ionizes to give added protection.
3.Handle electrostatic-sensitive components, boards, and assemblies by the
case or the PCB edge.
4.Avoid contact with pins, leads, or circuitry.
5.Turn off power and input signals before inserting and removing connectors or
test equipment.
6.Keep work area free of non-conductive materials such as ordinary plastic
assembly aids and Styrofoam.
7.Use field service tools, such as cutters, screwdrivers, and vacuums that are
conductive.
8.Always place drives and boards PCB-assembly-side down on the foam.
Instructions for the Lithium Battery
The SBC board is equipped with a Lithium battery. For the replacing of this
battery please observe the instructions described in the SBC board User manual.
The SBC board User manual is included in the delivery.
Warning
Danger of explosion when replacing with wrong type of battery.
Dieses Handbuch passt für folgende Modelle
4
Inhaltsverzeichnis
Beliebte Server Handbücher anderer Marken
iRobo
iRobo IPC2U Bedienungsanleitung
Nortel
Nortel 1000 Con?guration guide Bedienungsanleitung
Asus
Asus AP7500 Bedienungs- und Wartungshandbuch
Avid Technology
Avid Technology AirSpeed 5000 Bedienungsanleitung
HP
HP Integrity rx2600 Installationsanleitung
Milestone
Milestone Husky IVO 350T Bedienungsanleitung