Kontron PCI-946-1 Produkthandbuch

PCI-946-1 & P3S440BX

PENTIUM III®SBC

Technical Reference Manual

Version 1.5.1, November 2005

Note: The latest releases of the Technical Reference Manuals are available at:

ftp://ftp.kontron.ca/Support/Product_Manuals/

Ref. : M946R1_TECH

www.kontron.com

StockCheck.com

FOREWORD

The information in this document is provided for reference purposes only. Kontron does

not assume any liability for the application of information or the use of products described

herein.

This document may contain information or refer to products protected by the copyrights or

patents of others and does not convey any license under the patent rights of Kontron, nor

the rights of others.

Printed in Canada.

StockCheck.com

Downloaded from StockCheck.com

Your comments are valuable for us and will contribute to improve the quality of this product by complementing and returning this form.

1. Overall rating of the Technical Reference Manual: Excellent Satisfactory Fair Poor

2. Was the information you were seeking easy to find? Yes No

If no, can you comment? _____________________________________________________________________

3. What section of this manual do you refer to the most? ____________________________________________

4. How can you rate this manual?

In terms of clarity of information: Excellent Satisfactory Fair Poor

Comments: _______________________________________________________________________________

_________________________________________________________________________________________

In terms of complexity: Too technical Just OK Not technical enough

Comments: _______________________________________________________________________________

_________________________________________________________________________________________

In terms of classification of information: Excellent Satisfactory Fair Poor

Comments: _______________________________________________________________________________

_________________________________________________________________________

5. Is there any missing information? Yes No

If yes, what information is missing?____________________________________________________________

_________________________________________________________________________________________

6. Is some information not properly or clearly explained? Yes No

If yes, can you comment?____________________________________________________________________

________________________________________________________________________________

7. Additional comments (suggestions, errors found, etc.): _____________________________________________

_________________________________________________________________________________________

Please send your comments to:

Kontron Inc

Technical Writing dept.

616 Curé Boivin, Boisbriand

(Québec) CANADA J7G 2A7

Name ________________________________

Company _____________________________

Address ______________________________

_____________________________________

Optional

P C I - 9 4 6 - 1 a n d P 3 S 4 4 0 B X

Technical Reference Manual

StockCheck.com

Downloaded from StockCheck.com

FCC Compliance Statement

Warning

Changes or modifications to this unit not expressly approved by the party responsible for

the compliance could void the user’s authority to operate this equipment.

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a

commercial environment. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instruction manual, may cause

harmful interference to radio communications. Operation of this equipment in a residential

area is likely to cause harmful interference, in which case the user will be required to

correct the interference at his or her own expense.

European Statement

Warning

This is a class B product. If not installed in a properly shielded enclosure, and used in

accordance with the instruction manual, this product may cause radio interference in which

case the user may be required to take adequate measures at his or her own expense.

Safety Standard

UL Recognized Component, File # E186339 vol. 1 section 2

Care and handling precautions for Lithium batteries

•Do not short circuit

•Do not heat or incinerate

•Do not charge

•Do not deform or disassemble

•Do not apply solder directly

•Do not mix different types or partially used batteries together

•Always observe proper polarities

StockCheck.com

Downloaded from StockCheck.com

READ ME FIRST

Your computer board has a standard non-rechargeable lithium battery. To preserve the

battery lifetime, the battery enable jumper is removed when you receive the board.

EXERCISE CAUTION WHILE REPLACING LITHIUM BATTERY

WARNING

There is danger of explosion if battery is incorrectly replaced. Replace only

with the same or equivalent type recommended by the manufacturer.

Dispose of used batteries according to the manufacturer's instructions.

ATTENTION

Il y a danger d’explosion s’il y a remplacement incorrect de la batterie.

Remplacer uniquement avec une batterie du même type ou d’un type

équivalent recommandé par le constructeur. Mettre au rebut les batteries

usagées conformément aux instructions du fabriquant.

ACHTUNG

Explosionsgefahr bei falschem Batteriewechsel. Verwenden Sie nur die

empfohlenen Batterietypen des Herstellers. Entsorgen Sie die verbrauchten

Batterien laut Gebrauchsanweisung des Herstellers.

ATENCION

Puede explotar si la pila no este bien reemplazada.

Solo reemplazca la pila con tipas equivalentes segun las instrucciones del

manifacturo. Vote las pilas usadas segun las instrucciones del manifacturo.

StockCheck.com

Downloaded from StockCheck.com

IMPORTANT

This manual covers both PCI-946-1 and P3S440BX Single Board

Computers where the difference resides in the usage of the Celeron® and

Pentium® III® processor respectively.

POWERING-UP THE BOARD

If you should encounter a problem, verify the following items:

Make sure that all connectors are properly connected.

Check your boot diskette.

If the board still does not start up properly, you should try booting your

system with the PCI-946-1 and P3S440BX installed in the system, a monitor

and a mouse connected to the board. This is the minimum required to verify

the board’s operation.

If you still are not able to verify your board, please refer to the

emergency Procedure in the Appendix Section.

If you still are not able to get your board up and running, contact our

technical Support department for assistance.

StockCheck.com

Downloaded from StockCheck.com

BIOS UPGRADE & AUTOMATIC CPLD HARDWARE UPGRADE

During the first system boot up after you update the Boot Block Flash BIOS

with the UPGBIOS utility, the BIOS may need to upgrade the CPLD

devices. In such a case, do not interrupt the system in any way (power

down, reset, mouse or keyboard functions). The devices will be

damaged and your board rendered inoperative if you disturb the CPLD

hardware upgrade process!

If your device upgrade was successful, the following message is displayed

under the “Status:” line prior to rebooting:

Update complete successfully, wait for the automatic reboot.

Rebooting in 5 second(s).

If the update is not successful, the following message appears under the

“Status:” line:

ERROR: general failure programming CPLDs!

Please contact Kontron’s technical support.

You must contact Kontron’s technical support for further instructions.

ADAPTER CABLES

While adapter cables are provided from various sources, the pinout is often

different. The direct crimp design offered by Kontron allows the simplest

cable assembly. All cables are available from Kontron Sales Department.

StockCheck.com

Downloaded from StockCheck.com

UNPACKING AND SAFETY PRECAUTIONS

STATIC ELECTRICITY

Since static electricity can cause damage to electronic devices, the following precautions

should be taken:

1. Keep the board in its anti-static package, until you are ready to install it.

2. Touch a grounded surface or wear a grounding wrist strap before removing the board

from its package; this will discharge any static electricity that may have built up in

your body.

3. Handle the board by the edges.

Storage Environment

Electronic boards are sensitive devices. Do not handle or store devices near strong

electrostatic, electromagnetic, magnetic or radioactive fields.

Power Supply

Before any installation or setup, ensure that the board is unplugged from power sources or

subsystems.

Unpacking

Follow these recommendations while unpacking:

1. After opening the box, save it and the packing material for possible future shipment.

2. Remove the board from its anti-static wrapping and place it on a grounded surface.

3. Inspect the board for damage. If there is any damage or missing items, notify Kontron

immediately.

When unpacking you will find:

1. One PCI-946-1 or P3S440BX Single Board Computer.

2. One CDROM containing drivers.

StockCheck.com

Downloaded from StockCheck.com

TABLE OF CONTENTS

1 PRODUCT DESCRIPTION.............................................................1-1

1.1 PRODUCT OVERVIEW..................................................................... 1-1

1.2. PCI-946-1 and P3S440BX Product Specifications............................. 1-2

2 ONBOARD FEATURES...................................................................2-1

2.1. System Core .......................................................................................... 2-1

2.1.1. Processors................................................................................................... 2-1

2.1.2. Memory......................................................................................................2-2

2.1.3. Battery........................................................................................................2-3

2.2. Ethernet ................................................................................................. 2-4

2.3. I/O Devices ............................................................................................ 2-5

2.3.1. I/O Connections ......................................................................................... 2-5

2.3.2. Keyboard.................................................................................................... 2-6

2.3.3. PS/2 Mouse ................................................................................................ 2-6

2.4. Parallel Port .......................................................................................... 2-7

2.5. Serial Ports ............................................................................................ 2-8

2.5.1. Serial Port 1................................................................................................ 2-8

2.5.2. Serial Port 2................................................................................................ 2-9

2.6. USB Ports ............................................................................................ 2-11

2.7. Storage Devices ................................................................................... 2-12

StockCheck.com

Downloaded from StockCheck.com

2.7.1. Floppy Disk Drives .................................................................................. 2-12

2.7.2. IDE Devices ............................................................................................. 2-13

2.7.3. SCSI Devices ...........................................................................................2-14

2.7.4. Compact FlashDisk .................................................................................. 2-16

2.8. Video Features .................................................................................... 2-17

2.9. Power Supply ...................................................................................... 2-18

3 INSTALLING THE BOARD ...........................................................3-1

3.1. PCI-946 & P3S440BX Connector and Jumper Locations ................ 3-1

3.2. Setting jumpers..................................................................................... 3-2

3.3. SUPERVISOR REGISTERS............................................................... 3-4

3.3.1. Register x90h: Serial port...........................................................................3-5

3.3.2. Register X91h: Reset History & CPU Fault............................................... 3-6

3.3.3. Register x92h: Clearing Reset History & Lock for Watchdog................... 3-6

3.3.4. Register x93h: Silicon ID Chip Interface, Local I2C, System Monitor Connector

Interface 3-7

3.3.5. Register x94h & x95h ................................................................................ 3-7

3.3.6. Register x96h: Programmable Watchdog................................................... 3-7

3.3.7. Register x97h: NMI sources & mask ......................................................... 3-8

3.4. Onboard Interconnectivity .................................................................. 3-9

3.4.1. PCI-946-1 Block Diagram ......................................................................... 3-9

3.4.2. P3S440BX Block Diagram ...................................................................... 3-10

3.4.3. Single Board Computer Main Features .................................................... 3-11

StockCheck.com

Downloaded from StockCheck.com

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Kontron Computerhardware Handbücher

Kontron

Kontron PC/104-PCMCIA-1 Bedienungsanleitung

Kontron

Kontron MOPSlcdGX1 Bedienungsanleitung

Kontron

Kontron ThinkIO-P Bedienungsanleitung

Kontron

Kontron CP3003-SA Bedienungsanleitung

Kontron

Kontron ePanel-C3 Bedienungsanleitung

Kontron

Kontron COM Express Extension Bedienungsanleitung

Kontron

Kontron microETXexpress-SP Bedienungsanleitung

Kontron

Kontron PCI-759 Bedienungsanleitung

Kontron

Kontron CI5TTV Series Bedienungsanleitung

Kontron

Kontron AdvancedMC AM4211 Bedienungsanleitung

Kontron

Kontron MSM200X Bedienungsanleitung

Kontron

Kontron MOPS/386A Bedienungsanleitung

Kontron

Kontron CP6016 Bedienungsanleitung

Kontron

Kontron CP308 Bedienungsanleitung

Kontron

Kontron CP3002 Bedienungsanleitung

Kontron

Kontron CP3003-SA Bedienungsanleitung

Kontron

Kontron SDML-WLU0 Series Bedienungsanleitung

Kontron

Kontron VX3030 Bedienungsanleitung

Kontron

Kontron MSP8020 Series Bedienungsanleitung

Kontron

Kontron MSM-LP Bedienungsanleitung

Kontron

Kontron aFLAT Series Bedienungsanleitung

Kontron

Kontron MPC-pONE Bedienungsanleitung

Kontron

Kontron COMh-caRP Bedienungsanleitung

Kontron

Kontron nanoETXexpress-SP Bedienungsanleitung

Beliebte Computerhardware Handbücher anderer Marken

EMC2

EMC2 VNX Series Betriebsanleitung

Panasonic

Panasonic DV0PM20105 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Bedienungsanleitung

Gigabyte

Gigabyte B660M DS3H AX DDR4 Bedienungsanleitung

Raidon

Raidon iT2300 Bedienungsanleitung

National Instruments

National Instruments PXI-8186 Bedienungsanleitung

Hauppauge

Hauppauge WinTV-HVR-2250 Bedienungsanleitung

Manhattan

Manhattan 702843 Bedienungsanleitung

Aphex

Aphex 230 Bedienungsanleitung

AMD

AMD Phenom II Betriebshandbuch

Intel

Intel NUC 12 Pro Bedienungsanleitung

dbx

dbx Zone Pro 1260 Bedienungsanleitung

Galaxy

Galaxy GHDX2-2430S-24F4D Bedienungsanleitung

Intel

Intel AXXRMFBU4 Bedienungsanleitung

ST X-NUCLEO-SAFEA1B Betriebsanleitung

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Bedienungsanleitung

Advantech

Advantech ASMB-935 Series Bedienungsanleitung

Jupiter

Jupiter RAM PACK Bedienungsanleitung