Kontron DIMM-PC ADA7 Bedienungsanleitung

®Kontron User's Guide

®DIMM-PC ADA7

Document Revision 125

This page intentionally left blank

Table of Contents

1........................................................................................................ 4User Information

1.1 .............................................................................................4About This Manual

1.2 ...............................................................................................4Copyright Notice

1.3 ......................................................................................................4Trademarks

1.4 ........................................................................................................4Standards

1.5 .........................................................................................................4Warranty

1.6 ..............................................................................................5Technical Support

Kontron User's Guide

DIMM-PC ADA7 iii

1 User Information

Kontron User's Guide

DIMM-PC ADA7 4

1.1

1.2

1.3

1.4

1.5

User Information

About This Document

This document provides information about products from Kontron Embedded Modules GmbH and/or its

subsidiaries. No warranty of suitability, purpose, or fitness is implied. While every attempt has been

made to ensure that the information in this document is accurate, the information contained within is

supplied “as-is” and is subject to change without notice.

For the circuits, descriptions and tables indicated, Kontron assumes no responsibility as far as patents or

other rights of third parties are concerned.

retrieval system, or translated into any language or computer language, in any form or by any means

(electronic, mechanical, photocopying, recording, or otherwise), without the express written permission

of Kontron Embedded Modules GmbH.

DIMM-PC®, PISA®, ETX®, ETXexpress®, microETXexpress™, X-board®, DIMM-IO® and DIMM-BUS® are

trademarks or registered trademarks of Kontron Embedded Modules GmbH. Kontron is trademark or

registered trademark of Kontron AG.

Trademarks

The following lists the trademarks of components used in this board.

®IBM, XT, AT, PS/2 and Personal System/2 are trademarks of International Business

Machines Corp.

®Microsoft is a registered trademark of Microsoft Corp.

®Intel is a registered trademark of Intel Corp.

®All other products and trademarks mentioned in this manual are trademarks of their

respective owners.

Standards

Kontron Embedded Modules GmbH is certified to ISO 9000 standards.

Warranty

This Kontron Embedded Modules GmbH product is warranted against defects in material and

workmanship for the warranty period from the date of shipment. During the warranty period, Kontron

Embedded Modules GmbH will at its discretion decide to repair or replace defective products.

Within the warranty period, the repair of products is free of charge as long as warranty conditions are

observed.

1 User Information

Kontron User's Guide

DIMM-PC ADA7 5

The warranty does not apply to defects resulting from improper or inadequate maintenance or handling

by the buyer, unauthorized modification or misuse, operation outside of the product’s environmental

specifications or improper installation or maintenance.

Kontron Embedded Modules GmbH will not be responsible for any defects or damages to other products

not supplied by Kontron Embedded Modules GmbH that are caused by a faulty Kontron Embedded

Modules GmbH product.

1.6 Technical Support

Technicians and engineers from Kontron Embedded Modules GmbH and/or its subsidiaries are available

for technical support. We are committed to making our product easy to use and will help you use our

products in your systems.

Before contacting Kontron Embedded Modules GmbH technical support, please consult our Web site at

http://www.kontron-emea.com/emd for the latest product documentation, utilities, and drivers. If the

information does not help solve the problem, contact us by telephone or email.

Asia Europe North/South America

Kontron Asia Inc. Kontron Embedded Modules GmbH Kontron America

4F, No.415, Ti-Ding Blvd., NeiHu

District,

Taipei 114, Taiwan

Brunnwiesenstr. 16

94469 Deggendorf – Germany

14118 Stowe Drive

Poway, CA 92064-7147

Tel: +886 2 2799 2789 Tel: +49 (0) 991-37024-0 Tel: +1 (888) 294 4558

Fax: + 886 2 2799 7399 Fax: +49 (0) 991-37024-333 Fax: +1 (858) 677 0898

mailto:[email protected] mailto:[email protected] mailto:[email protected]

2 Connector location

Kontron User's Guide

DIMM-PC ADA7 6

2Connector location

Since CE4.0.0

Keyboard USB

Ethernet

(from CPU Module) PowerCompactFlash @

secondary IDE

LPT1

COM1

COM2

COM3

COM4

DIMM-PC

CPU Module

PC/104

RESET

ISA Con.

Battery 3V

Speaker

JIPA

Display Con.

DIMM-PC

I/O Modules

POTI

(for Dot Matrix Disp.)

CRT

Ethernet

(from I/O Module)

Link / Activity

LEDs for Ethernet

GND Con.

(

Banana Plu

VCC Con.

(Banana Plug)

)

Power

Port 80

Debug-Out

Backlight

Floppy

primary IDE

with activity - LED

secondary IDE

with activity - LED

MS / SL select

for CompactFlash

Dot-Matrix

Displa

Link / Activity

LEDs for Ethernet

Feature

Ethernet

input

Note: On every through-hole connector, Pin1 is marked with a quadratic pad!

3 Connector Pinout

Kontron User's Guide

DIMM-PC ADA7 7

3Connector Pinout

PC/104-BUS PC/104-

POWER

primary

IDE

secondary

IDE FLOPPY LPT1

PIN A(X1) B(X1) C(x2) D(x2) X3 X24 X31 X15 X13

0 GND GND

1 IOCHCK# GND SBHE# MEMCS16# GND RESET# RESET# GND STB#

2 SD7 RSTDRV LA23 IOCS16# VCC GND GND NC AFD#

3 SD6 VCC LA22 IRQ10 CODEPIN SD7 SD7 GND PD0

4 SD5 IRQ9

A21 IRQ11 +12V SD8 SD8 NC ERR#

5 SD4 -5V LA20 IRQ12 -5V SD6 SD6 GND PD1

6 SD3 DRQ2 LA19 IRQ15 -12V SD9 SD9 NC INIT#

7 SD2 -12V LA18 IRQ14 GND SD5 SD5 GND PD2

8 SD1

0WS LA17 DACK0# VCC SD10 SD10 FDCIDX# SLIN#

9 SD0 +12V MEMR# DRQ0 SD4 SD4 GND PD3

10 IOCHRDY GND MEMW# DACK5# SD11 SD11 FDCMTR0# GND

11 AEN SMEMW# SD8 DRQ5 SD3 SD3 GND PD4

12 SA19 SMEMR# SD9 DACK6# SD12 SD12 NC GND

13 SA18 IOW# SD10 DRQ6 SD2 SD2 GND PD5

14 SA17 IOR# SD11 DACK7# SD13 SD13 FDCDS0# GND

15 SA16 DACK3# SD12 DRQ7 SD1 SD1 GND PD6

16 SA15 DRQ3 SD13 VCC SD14 SD14 NC GND

17 SA14 DACK1# SD14 MASTER# SD0 SD0 GND PD7

18 SA13 DRQ1 SD15 GND SD15 SD15 FDCDIR# GND

19 SA12 REFRESH# GND GND GND GND GND ACK#

20 SA11 SYSCLK NC NC FDCSTEP# GND

21 SA10 IRQ7 NC NC GND BUSY#

22 SA9 IRQ6 GND GND FDCWDAT# GND

23 SA8 IRQ5 IOW#

IOW GND PE

24 SA7 IRQ4 GND GND FDCWG# GND

25 SA6 IRQ3 IOR#

IOR GND SLCT#

26 SA5 DACK2# GND GND FDCTRK0# VCC

27 SA4 T

C IOCHRDY IOCHRDY GND

28 SA3 BALE NC NC FDCWPRT#

29 SA2 VCC NC NC GND

30 SA1 OSC GND GND FDCRDATA#

31 SA0 GND IRQ14 IRQ15 GND

32 GND GND IOCS16# IOCS16# FDCHDSEL#

33 SA1 SA1 GND

34 NC NC DSKCHG

35 SA0 SA0

36 SA2 SA2

37 IDE CS0# S

IDE CS0#

38 IDE CS1# S

IDE CS1#

39 HDLED# S

HDLED#

40 GND GND

41 VCC

42 VCC

43 GND

44 NC

3 Connector Pinout

ISA Slot JIPA DOT-MATRIX Compact Flash

PIN X17 (A) X17 (B) X17 (C) X17 (D) X29 X10 X30

1 IOCHCK

GND SBHE

MEMCS16

LFS GND GND

2 SD7 RSTDRV LA23 IOCS16

LLCLK GND SD3

3 SD6 VCC LA22 IR

10 GND VCC

(

+5V

)

SD4

4 SD5 IR

9 LA21 IR

11 GND VCC

(

+5V

)

SD5

5 SD4 -5V LA20 IR

12 SCLKY VEE

(

contrast volta

)

SD6

6 SD3 DR

2 LA19 IR

15 GND VEE

(

contrast volta

)

SD7

7 SD2 -12V LA18 IR

14 GND AFD A

S IDECS0

8 SD1 ZWS

LA17 DACK0

BLANK

AFD A

GND

9 SD0 +12V MEMR

0NC SLIN A

GND

10 IOCHRDY GND MEMW

DACK5

NC SLIN A

GND

11 AEN SMEMW

SD8 DR

5P8 INIT A

GND

12 SA19 SMEMR

SD9 DACK6

P9 INIT A

GND

13 SA18 IOW

SD10 DR

6P0 PD0 A VCC

14 SA17 IOR

SD11 DACK7

P1 PD0 A GND

15 SA16 DACK3

SD12 DR

7P2 PD1 A GND

16 SA15 DR

3 SD13 VCC P3 PD1 A GND

17 SA14 DACK1

SD14 MASTER

P10 PD2 A GND

18 SA13 DR

1 SD15 GND P11 PD2 A SA2

19 SA12 REF

P18 PD3 A SA1

20 SA11 S

SCLK P19 PD3 A SA0

21 SA10 IR

7 P4 PD4 A SD0

22 SA9 IR

6 P5 PD4 A SD1

23 SA8 IR

5 P6 PD5 A SD2

24 SA7 IR

4 P7 PD5 A IOCS16

25 SA6 IR

3 P12 PD6 A GND

26 SA5 DACK2

P13 PD6 A GND

27 SA4 TC P14 PD7 A SD11

28 SA3 BALE P15 PD7 A SD12

29 SA2 VCC P20 VCC

(

100 OHM

)

SD13

30 SA1 OSC P21 VCC

(

100 OHM

)

SD14

31 SA0 GND P22 GND SD15

32 P23 GND S IDECS1

33 GND GND

34 NC IOR

35 NC IOW

36 NC VCC

37 MAD12 IR

38 MAD13 VCC

39 MAD14 MS SE

40 MAD15 NC

41 NC RSTDRV

42 GND IOCHRDY

43 I2DA

44 I2CLK VCC

45 NC NC

46 NC NC

47 NC SD8

48 NC SD9

49 NC SD10

50 GND GND

51 VCC

52 DA O0

53 NC

54 NC

55 VDCLK

56 VSYNC

57 HSYNC

58 BLUE

59 GREEN

60 RED

61 SW BACK

62 VDD SRC

63 BACK SRC

64 NC

65 +12V

66 +12V

67 VCC

68 NC

69 NC

70 NC

71 FPVEE

72 VPANE

Kontron User's Guide

DIMM-PC ADA7 8

3 Connector Pinout

ETHERNET

(from I/O)

ETHERNET

(from CPU)

PS/2

KEYBOARD POWER POWER COM 1 COM 2 COM 3 COM 4

TXD

CPU

KBDATC

VCC

DCD1# X

DCD2#

DCD3#

485 TX

TXD

GND

RXD1 X

RXD2 X

RXD3 X

RXD

CPU

GND

12V

TXD1 X

TXD2 X

TXD3 X

485 TX

VCC

12V

DTR1# X

DTR2# X

DTR3# X

KBCLKC

GND

RXD

CPU

DSR1# X

DSR2#

DSR3#

485 RX

RTS1

RTS2# X

RTS3# X

CTS1# X

CTS2# X

CTS3# X

485 RX

RI1# X

RI2# X

RI3# X

SHLDGND

SHLDGN

SHLDG

CRT

MONITOR Backlight LCD Power Feature Connector

X11

X28

X18

X16

RED

VCC

/HDLED

GREEN

BACK

GND

VCC

BLUE

12V

I2DAT

GND

VCC

GND

I2CLK

GND

BACK SRC

PGOOD

GND

DA O0

GND

prg. ChipS

lect

GND

FPBACK

external SMI

reserved

VCC

SYNC

reserved

SYNC

reserved

SHLDGND

reserved

To protect the external power lines of peripheral devices the customer has to take care that:

®the wires have the right diameter to withstand the maximum available current

®the enclosure of the peripheral device fulfils the fire protecting requirements of

IEC/EN 60950.

Kontron User's Guide

DIMM-PC ADA7 9

4 Features

Kontron User's Guide

DIMM-PC ADA7 10

4Features

®One slot for DIMM-PC CPU module

®Two slots for DIMM add-on I/O modules

®JIPA socket

®PC/104-slot

®ISA slot

®PS/2 Keyboard-header

®Western socket for Ethernet 10base-T (from DIMM-IO Module)

®Western socket for Ethernet 10base-T and 100base-T (from DIMM-CPU Module)

®44pos. IDE connector on primary channel (pitch 2,00 mm)

®40pos. IDE connector on secondary channel (pitch 2,54mm)

®CompactFlash socket on secondary IDE channel (Master/Slave selectable by Jumper)

Note: Some CompactFlash Cards may cause problems when used together with other IDE devices

®34pos. Floppy-connector (pitch 2,54mm)

®Header for DOT-matrix display

®7-segment LED displays showing outputs on Debug-Port 80

®Piezo electronic speaker

®Reset-key

®battery (3V CR2032)

®4pos. power connector, 3pos. power connector with screw-terminals

®Two mounting holes for banana plug connectors (+5V and GND)

®LPT port (25pos. DSUB Connector)

®Four serial ports (9pos. DSUB Connector):

®3 x RS232-ports (COM1, COM2, COM3); 1 x RS485-port (COM4)

®15pos. VGA-header DSUB

Inhaltsverzeichnis

Andere Kontron Steuereinheit Handbücher

Kontron

Kontron COMe-mCT10 Bedienungsanleitung

Kontron

Kontron COMe-bSL6 Bedienungsanleitung

Kontron

Kontron ADA-ETX-CD-FC4 Bedienungsanleitung

Kontron

Kontron COMe-bKL6 Bedienungsanleitung

Kontron

Kontron COMe-cBT6 Bedienungsanleitung

Kontron

Kontron AdvancedTCA AM4330 Bedienungsanleitung

Kontron

Kontron SMARC sXAL Bedienungsanleitung

Kontron

Kontron CP-RIO6-001 Bedienungsanleitung

Kontron

Kontron EPIC/CE Bedienungsanleitung

Kontron

Kontron AM4520 Bedienungsanleitung

Kontron

Kontron AM4011 Bedienungsanleitung

Kontron

Kontron COMe-mAL10 Bedienungsanleitung

Kontron

Kontron SMARC-sAMX7 Bedienungsanleitung

Kontron

Kontron AM4150 Bedienungsanleitung

Kontron

Kontron CU 5 -2 Series Bedienungsanleitung

Kontron

Kontron COMe-bEP7 Bedienungsanleitung

Kontron

Kontron QSEVEN-Q7AL Bedienungsanleitung

Kontron

Kontron PC/104 VGALCD-6 Bedienungsanleitung

Kontron

Kontron ETX-LX2 Bedienungsanleitung

Kontron

Kontron CP-RIO3-04S Bedienungsanleitung

Kontron

Kontron AM4100 Bedienungsanleitung

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung