Kontron KTHM65/mITX Bedienungsanleitung

If it’s embedded, it’s Kontron

KTHM65 Users Guide

KTD-N0838-0

KTHM65/mITX

KTHM65 Users Guide

KTD-N0838-0 Page 2

Document revision history.

Revision

Date

Comment

Dec. 1st 2011

MLA

Preliminary version

No part of this document may be reproduced or transmitted in any form or by any means, electronically

or mechanically, for any purpose, without the express written permission of KONTRON Technology A/S.

Trademark Acknowledgement:

Brand and product names are trademarks or registered trademarks of their respective owners.

Disclaimer:

KONTRON Technology A/S reserves the right to make changes, without notice, to any product,

including circuits and/or software described or contained in this manual in order to improve design

and/or performance.

Specifications listed in this manual are subject to change without notice. KONTRON Technology

assumes no responsibility or liability for the use of the described product(s), conveys no license or title

under any patent, copyright, or mask work rights to these products, and makes no representations or

warranties that these products are free from patent, copyright, or mask work right infringement, unless

otherwise specified. Applications that are described in this manual are for illustration purposes only.

KONTRON Technology A/S makes no representation or warranty that such application will be suitable

for the specified use without further testing or modification.

Life Support Policy

KONTRON Technology’s PRODUCTS ARE NOT FOR USE AS CRITICAL COMPONENTS IN LIFE

SUPPORT DEVICES OR SYSTEMS WITHOUT EXPRESS WRITTEN APPROVAL OF THE GENERAL

MANAGER OF KONTRON Technology A/S.

As used herein:

Life support devices or systems are devices or systems which, (a) are intended for surgical implant into

body, or (b) support or sustain life and whose failure to perform, when properly used in accordance with

instructions for use provided in the labelling, can be reasonably expected to result in significant injury to

the user.

A critical component is any component of a life support device or system whose failure to perform can

be reasonably expected to cause the failure of the life support device or system, or to affect its safety or

effectiveness.

Document details

KTHM65 Users Guide

KTD-N0838-0 Page 3

KONTRON Technology Technical Support & Services

If you have questions about installing or using your KONTRON Technology Product, check this User’s

Manual first – you will find answers to most questions here. To obtain support, please contact your local

Distributor or Field Application Engineer (FAE).

Before Contacting Support: Please be prepared to provide as much information as possible:

•CPU Board

1. Type.

2. Part Number (find PN on label)

3. Serial Number if available (find SN on label)

•Configuration

1. CPU Type, Clock speed

2. DRAM Type and Size.

3. BIOS Revision (Find the Version Info in the BIOS Setup).

4. BIOS Settings different than Default Settings (Refer to the BIOS Setup Section).

•System

1. O/S Make and Version.

2. Driver Version numbers (Graphics, Network, and Audio).

3. Attached Hardware: Harddisks, CD-rom, LCD Panels etc.

Warranty

KONTRON Technology warrants its products to be free from defects in material and workmanship

during the warranty period. If a product proves to be defective in material or workmanship during the

warranty period, KONTRON Technology will, at its sole option, repair or replace the product with a

similar product.

Replacement Product or parts may include remanufactured or refurbished parts or components.

The warranty does not cover:

1. Damage, deterioration or malfunction resulting from:

A. Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product

modification, or failure to follow instructions supplied with the product.

B. Repair or attempted repair by anyone not authorized by KONTRON Technology.

C. Causes external to the product, such as electric power fluctuations or failure.

D. Normal wear and tear.

E. Any other causes which does not relate to a product defect.

2. Removal, installation, and set-up service charges.

Exclusion of damages:

KONTRON TECHNOLOGY LIABILITY IS LIMITED TO THE COST OF REPAIR OR REPLACEMENT

OF THE PRODUCT. KONTRON TECHNOLOGY SHALL NOT BE LIABLE FOR:

1. DAMAGE TO OTHER PROPERTY CAUSED BY ANY DEFECTS IN THE PRODUCT,

DAMAGES BASED UPON INCONVENIENCE, LOSS OF USE OF THE PRODUCT, LOSS OF

TIME, LOSS OF PROFITS, LOSS OF BUSINESS OPPORTUNITY, LOSS OF GOODWILL,

INTERFERENCE WITH BUSINESS RELATIONSHIPS, OR OTHER COMMERCIAL LOSS,

EVEN IF ADVISED OF THEIR POSSIBILITY OF SUCH DAMAGES.

2. ANY OTHER DAMAGES, WHETHER INCIDENTAL, CONSEQUENTIAL OR OTHERWISE.

3. ANY CLAIM AGAINST THE CUSTOMER BY ANY OTHER PARTY.

Document details

KTHM65 Users Guide

KTD-N0838-0 Page 4

Contents

Introduction .............................................................................................7

1Installation procedure.......................................................................8

1.1 Installing the board........................................................................................................................8

1.2 Requirement according to IEC60950............................................................................................9

2System Specification......................................................................10

2.1 Component main data.................................................................................................................10

2.2 System overview.........................................................................................................................14

2.3 Processor Support Table.............................................................................................................15

2.4 System Memory support .............................................................................................................16

2.5 KTHM65 Graphics Subsystem....................................................................................................17

2.5.1 Intel® HD Graphics 3000...........................................................................................................17

2.6 Power Consumption....................................................................................................................18

3Connector Locations......................................................................24

3.1 KTHM65/mITX – frontside...........................................................................................................24

3.2 KTHM65/mITX – IO Bracket area ...........................................................................................25

3.3 KTHM65/mITX – backside ..........................................................................................................25

4Connector Definitions.....................................................................26

5IO-Area Connectors.......................................................................27

5.1 Display connectors (IO Area)......................................................................................................27

5.1.1 DVI Connector (DVI-I) (J41).......................................................................................................27

5.1.2 DP Connectors (DP0/DP1) (J40/J39)........................................................................................28

5.2 Ethernet Connector .....................................................................................................................29

5.3 USB Connectors (IO Area)..........................................................................................................30

5.3.1 USB Connector 0/1 (USB0/1)....................................................................................................30

5.3.2 USB Connector 2/3 (USB2/3)....................................................................................................31

5.3.3 USB Connector 4/5 (USB4/5)....................................................................................................31

5.4 Audio Connector (IO Area)..........................................................................................................32

KTHM65 Users Guide

KTD-N0838-0 Page 5

6Internal Connectors........................................................................33

6.1 Power Connector (ATX/BTXPWR)..............................................................................................33

6.2 Fan Connectors (FAN_CPU) (J28) and (FAN_SYS) (J29).........................................................34

6.3 PS/2 Keyboard and Mouse connector (KBDMSE) (J27) ............................................................35

6.4 LVDS Flat Panel connector (LVDS) (J20)...................................................................................36

6.5 SATA (Serial ATA) Disk interface (J21 – J26) ............................................................................37

6.6 USB Connectors (USB)...............................................................................................................38

6.6.1 USB Connector 6/7....................................................................................................................38

6.6.2 USB Connector 8/9 (USB8/9) (J10)...........................................................................................38

6.6.3 USB Connector 10/11 (USB10/11) (J11)...................................................................................39

6.6.4 USB Connector 12/13 (USB12/13) (J12)...................................................................................39

6.7 Serial COM1 – COM4 Ports (J15, J16, J17, J18).......................................................................40

6.8 Audio Connectors........................................................................................................................41

6.8.1 CDROM Audio Input (CDROM) (J3)..........................................................................................41

6.8.2 Line2 and Mic2...........................................................................................................................41

6.8.1 Audio Header Connector (AUDIO_HEAD) (J31) .......................................................................42

6.9 Front Panel Connector (FRONTPNL) (J19)................................................................................43

6.10 Feature Connector (FEATURE) (J30).........................................................................................44

6.11 Clear CMOS Jumper (J37)..........................................................................................................46

6.12 SPI Recover Jumper (J4)............................................................................................................47

6.13 SPI Connector (SPI) (J5).............................................................................................................47

7Slot Connectors (PCIe, miniPCIe)..................................................48

7.1 PCIe Connectors.........................................................................................................................48

7.1.1 PCI-Express x16 Connector (PCIe x16)....................................................................................48

7.1.2 miniPCI-Express mPCIe0 (J34).................................................................................................50

7.1.3 miniPCI-Express mPCIe1 (J35).................................................................................................51

7.1.4 PCI-Express x1 Connector (PCIe x1) (J36)...............................................................................52

8On-board - & mating connector types.............................................53

9System Resources.........................................................................54

9.1 Memory Map ...............................................................................................................................54

9.2 Interrupt Usage............................................................................................................................55

9.3 IO Map.........................................................................................................................................56

10 BIOS..............................................................................................58

KTHM65 Users Guide

KTD-N0838-0 Page 6

11 AMI BIOS Beep Codes...................................................................59

12 OS Setup .......................................................................................60

KTHM65 Users Guide

KTD-N0838-0 Page 7

Introduction

This manual describes the KTHM65/mITX board made by KONTRON Technology A/S.

The KTHM65 board is based on KTQM67/mITX design, where the chipset QM67 is replaced by HM65,

having less functionality. The KTHM65 support 2nd generation Intel® i7 -, i5 -, i3 2Core and 4Core

processor and the Celeron B810 2Core, see “Processor Support Table for more specific details.

The difference between the KTHM65/mITX and the KTQM67/mITX is specified in the following table:

Function

KTHM65/mITX

KTQM67/mITX

Chipset HM65 QM67

LAN ETH1 ETH1 + ETH2 + ETH3

Display support DVI-I - 2x DP - LVDS DVI-I - 2x DP - LVDS - eDP

IEEE1394a - IEEE1394_0 - IEEE1394_1

USB 6 External + 6 Internal

6 External + 8 Internal

RAID - RAID 0/1/5/10

Intel® AMT - AMT 7.0

Intel® TXT - Yes *

Intel® VT-d - Yes *

Intel® vPRO - Yes *

Intel® Remote PC Assist Technology

Reactive Proactive - Reactive

(*) Depends also on processor type.

Use of this Users Guide implies a basic knowledge of PC-AT hard- and software. This manual is

focused on describing the KTHM65 board special features and is not intended to be a standard PC-AT

textbook.

New users are recommended to study the short installation procedure stated in the following chapter

before switching-on the power.

All configuration and setup of the CPU board is either done automatically or manually by the user via

the CMOS setup menus. Only exception is the Clear CMOS jumper.

Introduction

KTHM65 Users Guide

KTD-N0838-0 Page 8

Warning: Turn off PSU (Power Supply Unit) completely (no mains power connected to the

PSU) or leave the Power Connectors unconnected while configuring the board. Otherwise

components (RAM, LAN cards etc.) might get damaged. If not using single 12V power input

make sure PSU has 3.3V monitoring watchdog (standard ATX PSU feature), running the board

without 3.3V will damage the board within minutes.

Warning: When mounting the board to chassis etc. please notice that the board contains

components on both sides of the PCB which can easily be damaged if board is handled

without reasonable care. A damaged component can result in malfunction or no function at all.

1 Installation procedure

1.1 Installing the board

To get the board running, follow these steps. If the board shipped from KONTRON has already

components like RAM, CPU and cooler mounted, then relevant steps below, can be skipped.

1. Turn off the PSU (Power Supply Unit)

2. Insert the DDR3 DIMM 204pin SODIMM module(s)

Be careful to push it in the slot(s) before locking the tabs. For a list of approved DDR3 SODIMMs

contact your Distributor or FAE. See also chapter “System Memory Support”.

3. Install the processor

The CPU is keyed and will only mount in the CPU socket in one way. Use suitable screwdriver to

open/ close the CPU socket. Refer to supported processor overview for details.

4. Cooler Installation

Use heat paste or adhesive pads between CPU and cooler and connect the Fan electrically to the

FAN_CPU connector.

5. Connecting Interfaces

Insert all external cables for hard disk, keyboard etc. A monitor must be connected in order to be

able change CMOS settings.

6. Connect and turn on PSU

Connect PSU to the board by the ATX/BTXPWR and the 4-pin ATX+12V connectors. For the

KTHM65/mITX alternatively use only the 4-pin ATX+12V connector if single voltage operation (+12V

+/-5%) is requested.

7. Power Button

The PWRBTN_IN must be toggled to start the Power supply; this is done by shorting pins 16

(PWRBTN_IN) and pin 18 (GND) on the FRONTPNL connector (see Connector description). A

“normally open” switch can be connected via the FRONTPNL connector.

8. BIOS Setup

Enter the BIOS setup by pressing the <Del> key during boot up.

Enter Exit Menu and Load Optimal Defaults.

Refer to the “BIOS Configuration / Setup“ section of this manual for details on BIOS setup.

9. Mounting the board to chassis

When fixing the Motherboard on a chassis it is recommended using screws with integrated washer and

having diameter of ~7mm.

Note: Do not use washers with teeth, as they can damage the PCB and may cause short circuits.

Installation procedure

Note: To clear all CMOS settings, including Password protection, move the Clear CMOS jumper in the

Clear CMOS position (with or without power) for ~10 sec. This will Load Failsafe Defaults and make sure

Secure CMOS is disabled.

KTHM65 Users Guide

KTD-N0838-0 Page 9

1.2 Requirement according to IEC60950

Users of KTHM65 family boards should take care when designing chassis interface connectors in order

to fulfil the IEC60950 standard:

Lithium Battery precautions:

CAUTION!

Danger of explosion if battery is incorrectly

replaced.

Replace only with same or equivalent type

recommended by manufacturer.

Dispose of used batteries according

to the manufacturer’s instructions.

VORSICHT!

Explosionsgefahr bei unsachgemäßem

Austausch der Batterie.

Ersatz nur durch den selben oder einen vom

Hersteller empfohlenen gleichwertigen Typ.

Entsorgung gebrauchter Batterien nach

Angaben des Herstellers.

ADVARSEL!

Lithiumbatteri – Eksplosionsfare ved fejlagtig

håndtering.

Udskiftning må kun ske med batteri

af samme fabrikat og type.

Levér det brugte batteri tilbage til leverandøren.

ADVARSEL

Eksplosjonsfare ved feilaktig skifte av batteri.

Benytt samme batteritype eller en tilsvarende

type anbefalt av apparatfabrikanten.

Brukte batterier kasseres i henhold til

fabrikantens

instruksjoner.

VARNING

Explosionsfara vid felaktigt batteribyte.

Använd samma batterityp eller en ekvivalent

typ som rekommenderas av apparattillverkaren.

Kassera använt batteri enligt fabrikantens

instruktion.

VAROITUS

Paristo voi räjähtää, jos se on virheellisesti

asennettu.

Vaihda paristo ainoastaan laltevalmistajan

suosittelemaan

tyyppiin. Hävitä käytetty paristo valmistajan

ohjeiden

mukaisesti.

When an interface/connector has a VCC (or other power) pin, which is directly connected to a power

plane like the VCC plane:

To protect the external power lines of the peripheral devices, the customer has to take care about:

•That the wires have suitable rating to withstand the maximum available power.

•That the enclosure of the peripheral device fulfils the fire protecting requirements of IEC60950.

Installation procedure

KTHM65 Users Guide

KTD-N0838-0 Page 10

2 System Specification

2.1 Component main data

The table below summarizes the features of the KTHM65/mITX embedded motherboard.

Form factor

KTHM65/mITX: miniITX (170,18 mm by 170,18 mm)

Processor

Support the following 2nd Generation Intel® Core™ (Sandy Bridge M) and Intel®

Celeron® processors via Socket G2 (rPGA 988B ) ZIF Socket

•Intel® Core™ i7

•Intel® Core™ i5

•Intel® Core™ i3

•Intel® Celeron® B810

Up to 1333MHz system bus and 2/3/4/6MB internal cache.

Memory

•DDR3 SODIMM 204pin socket (2 sockets)

•Support single and dual ranks DDR3 1066/1333/1600MT/s

(PC3-8500/PC3-10600/PC3-12800)

•Support system memory from 256MB and up to 4x 8GB (2x 8GB on mITX).

Note: Less than 4GB displayed in System Properties using 32bit OS

(Shared Video Memory/PCI resources is subtracted)

•ECC not supported (PGA processors do not support ECC)

Chipset

Intel HM65 PCH (Platform Controller Hub)

•Intel ® AT (Anti-Theft Technology)

•Intel ® HD Audio Technology

•Intel ® RST (Rapid Storage Technology) (AHCI only, not RAID)

•SATA (Serial ATA) 6Gb/s and 3Gb/s.

•USB revision 2.0

•PCI Express revision 2.0

•ACPI 3.0b compliant

•Dual Display support (Dual Graphic Pipes)

•Blue-ray HD video playback

Security

•Intel® Integrated TPM 1.2 support

Audio

Audio, 7.1 Channel High Definition Audio Codec using the VIA 1708B codec

•Line-out

•Line-in

•Surround output: SIDE, LFE, CEN, BACK and FRONT

•Microphone: MIC1 and MIC2

•CDROM in

•SPDIF (electrical Interface only)

•On-board speaker (Electromagnetic Sound Generator like Hycom HY-05LF)

System Specification

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Kontron Hauptplatine Handbücher

Kontron

Kontron mITX-VR1000 Bedienungsanleitung

Kontron

Kontron KTQM67/mITX Bedienungsanleitung

Kontron

Kontron KT690/mITX Bedienungsanleitung

Kontron

Kontron ECX-BYT Bedienungsanleitung

Kontron

Kontron KTA70M/mITX Bedienungsanleitung

Kontron

Kontron ECX-KBL-U Bedienungsanleitung

Kontron

Kontron ETXexpress Eval Type 3 Bedienungsanleitung

Kontron

Kontron COMe-cDV7 Bedienungsanleitung

Kontron

Kontron KTD-N0850-B Bedienungsanleitung

Kontron

Kontron COMe-m4AL10 Bedienungsanleitung

Kontron

Kontron KTA75/Flex Bedienungsanleitung

Kontron

Kontron mITX-E3826 Bedienungsanleitung

Kontron

Kontron KTQ67/ATXE Bedienungsanleitung

Kontron

Kontron JRexplus-DC Bedienungsanleitung

Kontron

Kontron ATX-HSW-S Bedienungsanleitung

Kontron

Kontron 986LCD-M/mITX Bedienungsanleitung

Kontron

Kontron mITX-BDW-U Bedienungsanleitung

Kontron

Kontron mITX-E3815 Bedienungsanleitung

Kontron

Kontron pITX-iMX8M Bedienungsanleitung

Kontron

Kontron Mungo545 Bedienungsanleitung

Kontron

Kontron 3.5-SBC-APL Bedienungsanleitung

Kontron

Kontron Qseven-Eval Carrier Bedienungsanleitung

Kontron

Kontron 886LCD-M/ATX Bedienungsanleitung

Kontron

Kontron ETXexpress UGM Bedienungsanleitung

Beliebte Hauptplatine Handbücher anderer Marken

DFI

DFI SD170 Bedienungsanleitung

ASROCK

ASROCK ROMED8-2T Bedienungsanleitung

Asus

Asus P2L97A Bedienungsanleitung

Winmate

Winmate IC70 Bedienungsanleitung

Asus

Asus MES-B Bedienungsanleitung

Grantech

Grantech SYS8F377VGGA-3OMN Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Bedienungsanleitung

Gigabyte

Gigabyte GA-9IVDT Bedienungsanleitung

Texas Instruments

Texas Instruments ADS8372EVM Bedienungsanleitung

Commell

Commell MS-C73 Bedienungsanleitung

IBT Technologies

IBT Technologies MB860 Bedienungsanleitung

Nvidia

Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung

Biostar

Biostar M7VIT Bravo Bedienungs- und Montageanleitung

Intel

Intel D33217CK Bedienungsanleitung

Asus

Asus F1A55-M LX PLUS R2.0 Bedienungsanleitung

EPC

EPC EPC9147C Bedienungsanleitung

Asus

Asus EX-B760M-V5 D4 Bedienungsanleitung

EPOX

EPOX MU-8KHA0010 Bedienungsanleitung