Korg Volca Bass Gebrauchs- und Pflegehandbuch

volca bass System Firmware Update Instructions 1

System Firmware Update Instructions

Do not playback the system update file on any speaker or headphone system as this could lead to

damage to equipment and/or hearing loss. Korg or any of its affiliates will not accept responsibility for

any damages, personal loss or injury that may result from playback of the file.

What you will need

You will need the following to perform your update.

 An audio player or personal computer capable of audio playback

 A stereo mini-jack audio cable

 AC adapter KA-350 or six AA batteries

Make sure the batteries are brand new if using alkaline or fully charged if using NiMH batteries.

volca bass will not enter update mode if the batteries are depleted.

Preparations

1. Unzip the file “volcabass_updater_0102.zip”.

If using an audio player, transfer the file volcabass_sys_0102.wav from your computer to your audio

player.

Do not playback the system update file on any speaker or headphone system as this could lead

to damage to equipment and/or hearing loss.

2. Check the current version

Turn the power on while pressing the REC button.

volca bass System Firmware Update Instructions 2

System version 1.01

If the current system is version 1.01, the display

will be lit as shown. Your volca bass is not up to

date. Proceed to step 3.

System version 1.02

If the current system is version 1.02, the display

will be lit as shown. Your volca bass is already up

to date.

3. Connect the audio output of your playback device to the SYNC IN connector on your volca bass.

ver. 1.01

ver. 1.02

volca bass System Firmware Update Instructions 3

Perform the update

1. Turn the power on while pressing the FUNC and PLAY buttons.

“UPdt” will be displayed to show your volca bass has entered update mode.

2. Start the playback of volcabass_sys_0102.wav to begin updating.

Make sure the volume of the playback device has been turned up.

STEP LEDs 1-16 will indicate the update progress.

Make sure the update file is played from the beginning.

When using a computer, any other system sounds (e.g. email notification) will cause the update

to fail. Make sure all other applications are shut down and do not operate you computer during

the update.

The update will take approximately three minutes. Do not turn your volca bass off or stop

playback while update is in progress.

If the update fails, the knobs will start blinking. If this happens, observe “Tips” at the end of this

document and repeat the update from step 1.

volca bass System Firmware Update Instructions 4

3. When the update has been successfully completed, “End” will be displayed. Now, turn the power

off.

4. Go back to step 2 of “Preparations” and check that your volca bass has been updated.

Tips

 Update may fail with some audio players, computers or software. If this is the case, please try with a

different device.

 If you are having trouble with the update, please check the following:

 Check the current system firmware version. If it has already been updated, you will not be able

to update again (it will also be unnecessary).

 Make sure the volume of the playback device has been turned up.

Please note that some devices which have very high output levels may fail because of it. If this

is the case please try turning the volume down and start the update process again.

 Make sure all functions that affect the playback sound, such as cross-fade and EQ, are

disabled.

 Make sure the update file is played from the beginning.

 Check the connection from your playback device to your volca bass.

 When using a computer, any other system sounds (e.g. email notification) will cause the update

to fail. Make sure all other applications are shut down and do not operate you computer during

the update.

Andere Handbücher für Volca Bass

Inhaltsverzeichnis

Andere Korg Synthesizer Handbücher

Korg

Korg Kaossilator Dynamic Phrase Synthesizer Produktinformationsblatt

Korg

Korg microKORG Produktinformationsblatt

Korg

Korg M3R Bedienungsanleitung

Korg

Korg PA 500 Bedienungsanleitung

Korg

Korg PA800 Produktinformationsblatt

Korg

Korg MONOLOGUE Bedienungsanleitung

Korg

Korg MS-10 Bedienungsanleitung

Korg

Korg Wavedrum mini Bedienungsanleitung

Korg

Korg M50-88 Bedienungsanleitung

Korg

Korg PS-3200 Bedienungsanleitung

Korg

Korg POLYSIX Bedienungsanleitung

Korg

Korg 61key Bedienungsanleitung

Korg

Korg wavestate Bedienungsanleitung

Korg

Korg monotribe Gebrauchs- und Pflegehandbuch

Korg

Korg Kronos Analogic Bedienungsanleitung

Korg

Korg Synthe-Bass Bedienungsanleitung

Korg

Korg Trident Bedienungsanleitung

Korg

Korg iPOLYSIX Bedienungsanleitung

Korg

Korg Volca Bass Bedienungsanleitung

Korg

Korg EX-800 Bedienungsanleitung

Korg

Korg VOLCA FM Bedienungsanleitung

Korg

Korg DSS-1 Bedienungsanleitung

Korg

Korg PS60 Gebrauchsanweisung

Korg

Korg Prophecy Benutzerhandbuch

Beliebte Synthesizer Handbücher anderer Marken

Joranalogue

Joranalogue Contour 1 Bedienungsanleitung

Full Bucket Music

Full Bucket Music Mono/Fury Bedienungsanleitung

Kawai

Kawai PH50 Bedienungsanleitung

IK Multimedia

IK Multimedia UNO Synth PRO X Bedienungsanleitung

Kawai

Kawai MP7 Technisches Handbuch

Behringer

Behringer DEEPMIND 12 Bedienungsanleitung

Roland

Roland Gaia SH-01 Bedienungsanleitung

Roland

Roland GR-30 Bedienungsanleitung

Gotharman

Gotharman Gotharman's anAmoNo-box Bedienungsanleitung

Yamaha

Yamaha DX21 Bedienungsanleitung

QuStream

QuStream HDFS-550 Bedienungsanleitung

Modal Electronics

Modal Electronics ARGON8 Bedienungsanleitung

Roland

Roland GS-500 Bedienungsanleitung

Octave

Octave Cat SRM Bedienungsanleitung

Dreadbox

Dreadbox Murmux Initiate Bedienungsanleitung

neutral labs

neutral labs ELMYRA 2 Bedienungsanleitung

Waldorf

Waldorf KYRA Bedienungsanleitung

Tubbutec

Tubbutec Juno-66 Bedienungsanleitung